Re: gEDA-user: Was there a major change to how power nets are handled in netlists?

[Matt Ettus <boyscout@xxxxxxxxx>]

On Mon, Feb 16, 2009 at 6:05 PM, Ales Hvezda <ahvezda@xxxxxxxxxxxxxx> wrote:
> Hi Matt,
>
>>In many of my schematics, I would have multiple power symbols, and
>>when I wanted them to be the same, I just connected them.  However,
>>that no longer works!  The netlister is making them separate nets.
>
>        I cannot seem to reproduce this in a simple schematic.  Could
> you do me a favor and take a look at the below schematic, netlist it with
> your gnetlist (on your machine), and let me know if:
>
>        1) it matches what you are doing in your large schematic

Only partially.  I am using multiple sheets, and have many different
power connectors.  I have tried to reproduce it with a smaller
schematic and was unsuccessful.


>        2) it netlists correctly or incorrectly for you.

Your example netlists correctly.

> I might not have interpreted your schematics correctly and maybe I am
> missing something subtle.

Did you see the same problem?  The netlist I sent in the tarball shows
the problem.  If you rerun the netlister, do you get the same output
as the netlist I sent you?  If so, you have reproduced the problem :)

I will try making a smaller test case again, but haven't had luck so
far.  I would feel better if I knew that you saw the problem in the
netlist I sent.

Thanks,
Matt


_______________________________________________
geda-user mailing list
geda-user@xxxxxxxxxxxxxx
http://www.seul.org/cgi-bin/mailman/listinfo/geda-user