[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]
gEDA-user: gsch2pcb output file does not load on pcb

To: geda-user@xxxxxxxxxxxxxx
Subject: gEDA-user: gsch2pcb output file does not load on pcb
From: vincent Onelli <vonelli@xxxxxxxxxxxxx>
Date: Sun, 15 Mar 2009 10:34:41 -0400
Delivered-to: archiver@xxxxxxxx
Delivered-to: geda-user@xxxxxxxxxxxxxx
Delivery-date: Sun, 15 Mar 2009 14:34:48 -0400
List-archive: <http://www.seul.org/pipermail/geda-user>
List-help: <mailto:geda-user-request@moria.seul.org?subject=help>
List-id: gEDA user mailing list <geda-user.moria.seul.org>
List-post: <mailto:geda-user@moria.seul.org>
List-subscribe: <http://www.seul.org/cgi-bin/mailman/listinfo/geda-user>, <mailto:geda-user-request@moria.seul.org?subject=subscribe>
List-unsubscribe: <http://www.seul.org/cgi-bin/mailman/listinfo/geda-user>, <mailto:geda-user-request@moria.seul.org?subject=unsubscribe>
Reply-to: gEDA user mailing list <geda-user@xxxxxxxxxxxxxx>
Sender: geda-user-bounces@xxxxxxxxxxxxxx
Hi ...,

I generated schematic run the gsch2pcb up to gerber plot, with few bump
along the way. So far so good, then for various reason I had to change
the design so, I decided to start from ground zero, new directory, new
schematic, but the .pcb file generated by gsch2pcb when try to load on
pcb an error is displayed "error parsing files" "description syntax
error" and no parts are loaded. 
here is the file in question, I hope some of you good people can make
some sense I appreciate greatly and thank you.

# release: pcb 1.6.3
PCB("" 6000 5000)
Grid(10 0 0)
Cursor(0 0 3)
Flags(0x000000d0)
Groups("1,2,3,s:4,5,6,c:7:8:")
Styles("Signal,10,40,20:Power,25,60,35:Fat,40,60,35:Skinny,8,36,20")

	
Element(0x00 "" "" "" 160 0 3 100 0x00)
(
	Pin(50 50 60 38 "1" 0x101)
	 
	ElementLine(0 0 0 100 10)
	ElementLine(0 100 100 100 10)
	ElementLine(100 100 100 0 10)
	ElementLine(100 0 0 0 10)
	ElementLine(0 100 100 100 10)
	ElementLine(100 100 100 0 10)
	Mark(50 50)
)
fp(JUMPER1.fp,F1,unknown)

Element(0x00 "" "" "" 160 10 3 100 0x00)
(
	Pin(50 50 60 28 "1" 0x101)
	Pin(50 150 60 28 "2" 0x01)
	Pin(50 250 60 28 "3" 0x01)
	
	ElementLine(  0 50   0 250 20)
	ElementLine(100 50 100 250 20)
	ElementLine(  0 100 100 100 10)
	ElementArc(50  50 50 50 180 180 20)
	ElementArc(50 250 50 50   0 180 20)
	Mark(50 50)
)
fp(SIP3.fp,S3,unknown)

Element(0x00 "" "" "" 160 10 3 100 0x00)
(
	Pin(50 50 60 28 "1" 0x101)
	Pin(50 150 60 28 "2" 0x01)
	
	ElementLine(  0 50   0 150 20)
	ElementLine(100 50 100 150 20)
	ElementLine(  0 100 100 100 10)
	ElementArc(50  50 50 50 180 180 20)
	ElementArc(50 150 50 50   0 180 20)
	Mark(50 50)
).FP(SIP2.FP,S2,unknown)

Element(0x00 "" "" "" 160 10 3 100 0x00)
(
	Pin(50 50 60 28 "1" 0x101)
	Pin(50 150 60 28 "2" 0x01)
	
	ElementLine(  0 50   0 150 20)
	ElementLine(100 50 100 150 20)
	ElementLine(  0 100 100 100 10)
	ElementArc(50  50 50 50 180 180 20)
	ElementArc(50 150 50 50   0 180 20)
	Mark(50 50)
).fp(SIP2.fp,S1,unknown)

Element["" "bzr-1.fp" "TR1" "unknown" 50000 50000 -46000 23000 0 100 ""]
(
	Pin[-16000 -58000 12500 2000 13100 12100 "" "1" ""]
	Pin[-16000 37000 12500 2000 13100 12100 "" "2" ""]
	Pin[-1000 0 15500 2000 16100 2400 "" "1" ""]
	Pin[-45000 -13000 15500 2000 16100 2400 "" "2" ""]
	ElementLine [20000 13000 26000 1000 1000]
	ElementLine [-52000 0 -56000 -9000 1000]
	ElementLine [-56000 -9000 -55000 -17000 1000]
	ElementLine [-55000 -17000 -51000 -23000 1000]
	ElementLine [-51000 -23000 -21000 -65000 1000]
	ElementLine [-21000 -65000 -15000 -68000 1000]
	ElementLine [-15000 -68000 -9000 -66000 1000]
	ElementLine [-9000 -66000 -6000 -62000 1000]
	ElementLine [-6000 -62000 19000 -36000 1000]
	ElementLine [-18000 45000 -23000 42000 1000]
	ElementLine [-18000 45000 -11000 45000 1000]
	ElementLine [-7000 43000 -11000 45000 1000]
	ElementLine [20000 13000 -7000 43000 1000]
	ElementLine [-23000 42000 -52000 0 1000]
	ElementLine [26000 1000 27000 -8000 1000]
	ElementLine [27000 -8000 26000 -19000 1000]
	ElementLine [26000 -19000 25000 -25000 1000]
	ElementLine [25000 -25000 23000 -31000 1000]
	ElementLine [23000 -31000 21000 -33000 1000]
	ElementLine [21000 -33000 19000 -36000 1000]

	)

	
	
	
	
	
	
Element(0x00 "" "" "" 600 0 0 100 0x00)
(
	Pin(150 300 60 50 "1" 0x101)
	Pin(450 300 60 50 "2" 0x01)
	ElementArc(300 300 300 300 0 360 10)

	

	Mark (150 300)
).fp(RCY300.fp,D19,unknown)

	
Element(0x00 "" "" "" 160 0 3 100 0x00)
(
	Pin(50 50 60 38 "1" 0x101)
	 
	ElementLine(0 0 0 100 10)
	ElementLine(0 100 100 100 10)
	ElementLine(100 100 100 0 10)
	ElementLine(100 0 0 0 10)
	ElementLine(0 100 100 100 10)
	ElementLine(100 100 100 0 10)
	Mark(50 50)
).fp(JUMPER1.fp,H4,unknown)

	
	
	
	
	
	
Element(0x00 "" "" "" 600 0 0 100 0x00)
(
	Pin(150 300 60 50 "1" 0x101)
	Pin(450 300 60 50 "2" 0x01)
	ElementArc(300 300 300 300 0 360 10)

	

	Mark (150 300)
).fp(RCY300.fp,D18,unknown)

	
Element(0x00 "" "" "" 160 0 3 100 0x00)
(
	Pin(50 50 60 38 "1" 0x101)
	 
	ElementLine(0 0 0 100 10)
	ElementLine(0 100 100 100 10)
	ElementLine(100 100 100 0 10)
	ElementLine(100 0 0 0 10)
	ElementLine(0 100 100 100 10)
	ElementLine(100 100 100 0 10)
	Mark(50 50)
).fp(JUMPER1.fp,H3,unknown)

# retain backwards compatibility to older versions of PKG_DIL 
# which did not have 100,60,28 args

        
              
        
              
        
              
	
	
	
	
Element(0x00 "" "" "" 220 100 3 100 0x00)
(
	Pin(50 50 60 28 "1" 0x101)
	Pin(50 150 60 28 "2" 0x01)
	Pin(50 250 60 28 "3" 0x01)
	Pin(50 350 60 28 "4" 0x01)
	Pin(50 450 60 28 "5" 0x01)
	Pin(50 550 60 28 "6" 0x01)
	Pin(50 650 60 28 "7" 0x01)
	
	Pin(350 650 60 28 "8" 0x01)
	Pin(350 550 60 28 "9" 0x01)
	Pin(350 450 60 28 "10" 0x01)
	Pin(350 350 60 28 "11" 0x01)
	Pin(350 250 60 28 "12" 0x01)
	Pin(350 150 60 28 "13" 0x01)
	Pin(350 50 60 28 "14" 0x01)
	
	ElementLine(0 0 0 700 10)
	ElementLine(0 700 400 700 10)
	ElementLine(400 700 400 0 10)
	ElementLine(0 0 150 0 10)
	ElementLine(250 0 400 0 10)
	ElementArc(200 0 50 50 0 180 10)
	Mark(50 50)
).fp(DIP14.fp,U7,unknown)

Element["" "xform-LP24-500-1.fp" "T1" "unknown" 50000 50000 0 0 0 100
""]
(
	Pin[-205000 150000 3600 2000 4200 2000 "" "7" "edge2"]
	Pin[0 0 3600 2000 4200 2000 "" "1" "edge2"]
	Pin[0 50000 3600 2000 4200 2000 "" "2" "edge2"]
	Pin[0 100000 3600 2000 4200 2000 "" "4" "edge2"]
	Pin[0 150000 3600 2000 4200 2000 "" "3" "edge2"]
	Pin[-205000 0 3600 2000 4200 2000 "" "5" "edge2"]
	Pin[-205000 50000 3600 2000 4200 2000 "" "6" "edge2"]
	Pin[-205000 100000 3600 2000 4200 2000 "" "8" "edge2"]
	ElementLine [-7500 175000 -197500 175000 1000]
	ElementLine [-197500 175000 -197500 -25000 1000]
	ElementLine [-227500 0 -227500 150000 1000]
	ElementLine [-227500 150000 -212500 150000 1000]
	ElementLine [-7500 -25000 -7500 175000 1000]
	ElementLine [-212500 0 -227500 0 1000]
	ElementLine [-197500 -25000 -7500 -25000 1000]
	ElementLine [22500 150000 7500 150000 1000]
	ElementLine [7500 0 22500 0 1000]
	ElementLine [22500 0 22500 150000 1000]

	)

	
Element(0x00 "" "" "" 100 70 0 100 0x00)
(
# typical LED is 0.5 mm or 0.020" square pin.  See for example
# http://www.lumex.com and part number SSL-LX3054LGD.
# 0.020" square is 0.0288" diagonal.  A number 57 drill is 
# 0.043" which should be enough.  a 65 mil pad gives 11 mils
# of annular ring.

	Pin(-50 0 65 43 "1" 0x101)
	Pin(50 0 65 43 "2" 0x01)
   ElementArc(0 0 118 118     0 360 10)

   ElementArc(0 0 138 138     0 360 10)

	Mark(0 0)
).fp(LED5.fp,D17,unknown)

	
	
	
	
	
	
Element(0x00 "" "" "" 400 0 0 100 0x00)
(
	Pin(100 200 60 30 "1" 0x101)
	Pin(300 200 60 30 "2" 0x01)
	ElementArc(200 200 200 200 0 360 10)

	

	Mark (100 200)
).fp(RCY200.fp,C9,.1)

	
Element(0x00 "" "" "" 160 0 3 100 0x00)
(
	Pin(50 50 60 38 "1" 0x101)
	 
	ElementLine(0 0 0 100 10)
	ElementLine(0 100 100 100 10)
	ElementLine(100 100 100 0 10)
	ElementLine(100 0 0 0 10)
	ElementLine(0 100 100 100 10)
	ElementLine(100 100 100 0 10)
	Mark(50 50)
).fp(JUMPER1.fp,H2,unknown)

Element["" "Relay_OAC-5-1.fp" "RY1" "unknown" 50000 50000 0 0 0 100 ""]
(
	Pin[0 0 6600 2000 7200 2000 "" "1" "edge2"]
	Pin[40000 0 7100 2000 7700 2000 "" "2" "edge2"]
	Pin[90000 0 6600 2000 7200 2000 "" "3" "edge2"]
	Pin[110000 0 6600 2000 7200 2000 "" "4" "edge2"]
	Pin[70000 20000 11100 2000 11700 8000 "" "5" "edge2"]
	Pad[-30000 -30000 140000 -30000 1000 2000 3000 "" "6" ""]
	Pad[140000 -30000 140000 30000 1000 2000 3000 "" "7" ""]
	Pad[-30000 30000 140000 30000 1000 2000 3000 "" "8" ""]
	Pad[-30000 -30000 -30000 30000 1000 2000 3000 "" "9" ""]

	)

# retain backwards compatibility to older versions of PKG_DIL 
# which did not have 100,60,28 args

        
              
        
              
        
              
	
	
	
	
Element(0x00 "" "" "" 220 100 3 100 0x00)
(
	Pin(50 50 60 28 "1" 0x101)
	Pin(50 150 60 28 "2" 0x01)
	Pin(50 250 60 28 "3" 0x01)
	Pin(50 350 60 28 "4" 0x01)
	Pin(50 450 60 28 "5" 0x01)
	Pin(50 550 60 28 "6" 0x01)
	Pin(50 650 60 28 "7" 0x01)
	Pin(50 750 60 28 "8" 0x01)
	
	Pin(350 750 60 28 "9" 0x01)
	Pin(350 650 60 28 "10" 0x01)
	Pin(350 550 60 28 "11" 0x01)
	Pin(350 450 60 28 "12" 0x01)
	Pin(350 350 60 28 "13" 0x01)
	Pin(350 250 60 28 "14" 0x01)
	Pin(350 150 60 28 "15" 0x01)
	Pin(350 50 60 28 "16" 0x01)
	
	ElementLine(0 0 0 800 10)
	ElementLine(0 800 400 800 10)
	ElementLine(400 800 400 0 10)
	ElementLine(0 0 150 0 10)
	ElementLine(250 0 400 0 10)
	ElementArc(200 0 50 50 0 180 10)
	Mark(50 50)
).fp(DIP16.fp,U6,unknown)

	
	
	
	
Element(0x00 "" "" "" 220 100 0 100 0x00)
(
	Pin(0 150 50 20 "1" 0x101)
	Pin(300 150 50 20 "2" 0x01)

	ElementLine(0 150 100 150 10)
	ElementLine(200 150 300 150 10)

	ElementLine(100 150 200 100 10)
	ElementLine(200 100 200 200 10)
	ElementLine(200 200 100 150 10)
	ElementLine(100 100 100 200 10)
	Mark(0 150)
).fp(ALF300.fp,D16,unknown)

	
	
	
	
	
	
Element(0x00 "" "" "" 400 0 0 100 0x00)
(
	Pin(100 200 60 30 "1" 0x101)
	Pin(300 200 60 30 "2" 0x01)
	ElementArc(200 200 200 200 0 360 10)

	

	Mark (100 200)
).fp(RCY200.fp,C8,.1)

	
Element(0x00 "" "" "" 160 0 3 100 0x00)
(
	Pin(50 50 60 38 "1" 0x101)
	 
	ElementLine(0 0 0 100 10)
	ElementLine(0 100 100 100 10)
	ElementLine(100 100 100 0 10)
	ElementLine(100 0 0 0 10)
	ElementLine(0 100 100 100 10)
	ElementLine(100 100 100 0 10)
	Mark(50 50)
).fp(JUMPER1.fp,H1,unknown)

# retain backwards compatibility to older versions of PKG_DIL 
# which did not have 100,60,28 args

        
              
        
              
        
              
	
	
	
	
Element(0x00 "" "" "" 370 100 3 100 0x00)
(
	Pin(50 50 60 28 "1" 0x101)
	Pin(50 150 60 28 "2" 0x01)
	Pin(50 250 60 28 "3" 0x01)
	Pin(50 350 60 28 "4" 0x01)
	Pin(50 450 60 28 "5" 0x01)
	Pin(50 550 60 28 "6" 0x01)
	Pin(50 650 60 28 "7" 0x01)
	Pin(50 750 60 28 "8" 0x01)
	Pin(50 850 60 28 "9" 0x01)
	Pin(50 950 60 28 "10" 0x01)
	Pin(50 1050 60 28 "11" 0x01)
	Pin(50 1150 60 28 "12" 0x01)
	Pin(50 1250 60 28 "13" 0x01)
	Pin(50 1350 60 28 "14" 0x01)
	Pin(50 1450 60 28 "15" 0x01)
	Pin(50 1550 60 28 "16" 0x01)
	Pin(50 1650 60 28 "17" 0x01)
	Pin(50 1750 60 28 "18" 0x01)
	Pin(50 1850 60 28 "19" 0x01)
	Pin(50 1950 60 28 "20" 0x01)
	
	Pin(650 1950 60 28 "21" 0x01)
	Pin(650 1850 60 28 "22" 0x01)
	Pin(650 1750 60 28 "23" 0x01)
	Pin(650 1650 60 28 "24" 0x01)
	Pin(650 1550 60 28 "25" 0x01)
	Pin(650 1450 60 28 "26" 0x01)
	Pin(650 1350 60 28 "27" 0x01)
	Pin(650 1250 60 28 "28" 0x01)
	Pin(650 1150 60 28 "29" 0x01)
	Pin(650 1050 60 28 "30" 0x01)
	Pin(650 950 60 28 "31" 0x01)
	Pin(650 850 60 28 "32" 0x01)
	Pin(650 750 60 28 "33" 0x01)
	Pin(650 650 60 28 "34" 0x01)
	Pin(650 550 60 28 "35" 0x01)
	Pin(650 450 60 28 "36" 0x01)
	Pin(650 350 60 28 "37" 0x01)
	Pin(650 250 60 28 "38" 0x01)
	Pin(650 150 60 28 "39" 0x01)
	Pin(650 50 60 28 "40" 0x01)
	
	ElementLine(0 0 0 2000 10)
	ElementLine(0 2000 700 2000 10)
	ElementLine(700 2000 700 0 10)
	ElementLine(0 0 300 0 10)
	ElementLine(400 0 700 0 10)
	ElementArc(350 0 50 50 0 180 10)
	Mark(50 50)
).fp(DIP40.fp,U5,unknown)

	
	
	
	
Element(0x00 "" "" "" 220 100 0 100 0x00)
(
	Pin(0 150 50 20 "1" 0x101)
	Pin(300 150 50 20 "2" 0x01)

	ElementLine(0 150 100 150 10)
	ElementLine(200 150 300 150 10)

	ElementLine(100 150 200 100 10)
	ElementLine(200 100 200 200 10)
	ElementLine(200 200 100 150 10)
	ElementLine(100 100 100 200 10)
	Mark(0 150)
).fp(ALF300.fp,D15,unknown)

	
	
	
	
	
	
Element(0x00 "" "" "" 400 0 0 100 0x00)
(
	Pin(100 200 60 30 "1" 0x101)
	Pin(300 200 60 30 "2" 0x01)
	ElementArc(200 200 200 200 0 360 10)

	

	Mark (100 200)
).fp(RCY200.fp,C7,10/10V)

	
	
	
	
Element(0x00 "" "" "" 220 100 0 100 0x00)
(
	Pin(0 150 50 20 "1" 0x101)
	Pin(300 150 50 20 "2" 0x01)

	ElementLine(0 150 100 150 10)
	ElementLine(200 150 300 150 10)

	ElementLine(100 150 200 100 10)
	ElementLine(200 100 200 200 10)
	ElementLine(200 200 100 150 10)
	ElementLine(100 100 100 200 10)
	Mark(0 150)
).fp(ALF300.fp,D14,unknown)

	
	
	
	
	
	
Element(0x00 "" "" "" 200 0 0 100 0x00)
(
	Pin(50 100 60 30 "1" 0x101)
	Pin(150 100 60 30 "2" 0x01)
	ElementArc(100 100 100 100 0 360 10)

	

	Mark (50 100)
).fp(RCY100.fp,C12,.1)

	
	
	
	
	
	
Element(0x00 "" "" "" 200 0 0 100 0x00)
(
	Pin(50 100 60 30 "1" 0x101)
	Pin(150 100 60 30 "2" 0x01)
	ElementArc(100 100 100 100 0 360 10)

	

	Mark (50 100)
).fp(RCY100.fp,C6,.1)

# retain backwards compatibility to older versions of PKG_DIL 
# which did not have 100,60,28 args

        
              
        
              
        
              
	
	
	
	
Element(0x00 "" "" "" 220 100 3 100 0x00)
(
	Pin(50 50 60 28 "1" 0x101)
	Pin(50 150 60 28 "2" 0x01)
	Pin(50 250 60 28 "3" 0x01)
	Pin(50 350 60 28 "4" 0x01)
	Pin(50 450 60 28 "5" 0x01)
	Pin(50 550 60 28 "6" 0x01)
	Pin(50 650 60 28 "7" 0x01)
	Pin(50 750 60 28 "8" 0x01)
	
	Pin(350 750 60 28 "9" 0x01)
	Pin(350 650 60 28 "10" 0x01)
	Pin(350 550 60 28 "11" 0x01)
	Pin(350 450 60 28 "12" 0x01)
	Pin(350 350 60 28 "13" 0x01)
	Pin(350 250 60 28 "14" 0x01)
	Pin(350 150 60 28 "15" 0x01)
	Pin(350 50 60 28 "16" 0x01)
	
	ElementLine(0 0 0 800 10)
	ElementLine(0 800 400 800 10)
	ElementLine(400 800 400 0 10)
	ElementLine(0 0 150 0 10)
	ElementLine(250 0 400 0 10)
	ElementArc(200 0 50 50 0 180 10)
	Mark(50 50)
).fp(DIP16.fp,U3,unknown)

	
	
	
	
Element(0x00 "" "" "" 220 100 0 100 0x00)
(
	Pin(0 150 50 20 "1" 0x101)
	Pin(300 150 50 20 "2" 0x01)

	ElementLine(0 150 100 150 10)
	ElementLine(200 150 300 150 10)

	ElementLine(100 150 200 100 10)
	ElementLine(200 100 200 200 10)
	ElementLine(200 200 100 150 10)
	ElementLine(100 100 100 200 10)
	Mark(0 150)
).fp(ALF300.fp,D13,unknown)

	
	
	
	
	
	
Element(0x00 "" "" "" 200 0 0 100 0x00)
(
	Pin(50 100 60 30 "1" 0x101)
	Pin(150 100 60 30 "2" 0x01)
	ElementArc(100 100 100 100 0 360 10)

	

	Mark (50 100)
).fp(RCY100.fp,C11,.1)

	
	
	
	
	
	
Element(0x00 "" "" "" 200 0 0 100 0x00)
(
	Pin(50 100 60 30 "1" 0x101)
	Pin(150 100 60 30 "2" 0x01)
	ElementArc(100 100 100 100 0 360 10)

	

	Mark (50 100)
).fp(RCY100.fp,C5,.1)
Element(0x00 "" "" "" 0 10 0 100 0x00)
(
	Pin(100 200 90 60 "1" 0x101)
	Pin(200 200 90 60 "2" 0x01)
	Pin(300 200 90 60 "3" 0x01)

	# Gehaeuse
	ElementLine(  0  80 400  80 20)
	ElementLine(400  80 400 260 20)
	ElementLine(400 260   0 260 20) 
	ElementLine(  0 260   0  80 20) 

	# Kuehlfahne icl. Bohrung
	ElementLine(  0  80 400  80 20)
	ElementLine(400  80 400 140 20)
	ElementLine(400 140   0 140 20)
	ElementLine(  0 140   0  80 20)

	ElementLine(130 80 130 140 10)
	ElementLine(270 80 270 140 10)

	Mark(100 200)
).fp(TO220W.fp,U2,unknown)

	
	
	
	
Element(0x00 "" "" "" 220 100 0 100 0x00)
(
	Pin(0 150 50 20 "1" 0x101)
	Pin(300 150 50 20 "2" 0x01)

	ElementLine(0 150 100 150 10)
	ElementLine(200 150 300 150 10)

	ElementLine(100 150 200 100 10)
	ElementLine(200 100 200 200 10)
	ElementLine(200 200 100 150 10)
	ElementLine(100 100 100 200 10)
	Mark(0 150)
).fp(ALF300.fp,D12,unknown)

	
	
	
	
	
	
Element(0x00 "" "" "" 400 0 0 100 0x00)
(
	Pin(100 200 60 30 "1" 0x101)
	Pin(300 200 60 30 "2" 0x01)
	ElementArc(200 200 200 200 0 360 10)

	

	Mark (100 200)
).fp(RCY200.fp,C10,.1)

	
	
	
	
	
	
Element(0x00 "" "" "" 600 0 0 100 0x00)
(
	Pin(150 300 60 50 "1" 0x101)
	Pin(450 300 60 50 "2" 0x01)
	ElementArc(300 300 300 300 0 360 10)

	

	Mark (150 300)
).fp(RCY300.fp,C4,500/20V)

	
	
	
	
Element(0x00 "" "" "" 100 170 0 100 0x00)
(
	Pin(100 100 60 28 "1" 0x101)
	Pin(300 100 60 28 "2" 0x01)
	ElementLine(100 50 300 50 10)
	ElementLine(100 150 300 150 10)
	ElementArc(100 100 50 50 270 180 10)
	ElementArc(300 100 50 50 90 180 10)
	Mark (100 100)
).fp(HC49.fp,U1,unknown)

	
	
	
	
Element(0x00 "" "" "" 220 100 0 100 0x00)
(
	Pin(0 150 50 20 "1" 0x101)
	Pin(300 150 50 20 "2" 0x01)

	ElementLine(0 150 100 150 10)
	ElementLine(200 150 300 150 10)

	ElementLine(100 150 200 100 10)
	ElementLine(200 100 200 200 10)
	ElementLine(200 200 100 150 10)
	ElementLine(100 100 100 200 10)
	Mark(0 150)
).fp(ALF300.fp,D11,unknown)

	
	
	
	
	
	
Element(0x00 "" "" "" 200 0 0 100 0x00)
(
	Pin(50 100 60 30 "1" 0x101)
	Pin(150 100 60 30 "2" 0x01)
	ElementArc(100 100 100 100 0 360 10)

	

	Mark (50 100)
).fp(RCY100.fp,C3,22pF)

	
	
	
	
Element(0x00 "" "" "" 220 100 0 100 0x00)
(
	Pin(0 150 50 20 "1" 0x101)
	Pin(300 150 50 20 "2" 0x01)

	ElementLine(0 150 100 150 10)
	ElementLine(200 150 300 150 10)

	ElementLine(100 150 200 100 10)
	ElementLine(200 100 200 200 10)
	ElementLine(200 200 100 150 10)
	ElementLine(100 100 100 200 10)
	Mark(0 150)
).fp(ALF300.fp,D10,unknown)

	
	
	
	
Element(0x00 "" "" "" 220 100 0 100 0x00)
(
	Pin(0 150 50 20 "1" 0x101)
	Pin(300 150 50 20 "2" 0x01)

	ElementLine(0 150 100 150 10)
	ElementLine(200 150 300 150 10)

	ElementLine(100 150 200 100 10)
	ElementLine(200 100 200 200 10)
	ElementLine(200 200 100 150 10)
	ElementLine(100 100 100 200 10)
	Mark(0 150)
).fp(ALF300.fp,D9,unknown)

	
	
	
	
	
	
Element(0x00 "" "" "" 200 0 0 100 0x00)
(
	Pin(50 100 60 30 "1" 0x101)
	Pin(150 100 60 30 "2" 0x01)
	ElementArc(100 100 100 100 0 360 10)

	

	Mark (50 100)
).fp(RCY100.fp,C2,22pF)

	
	
	
	
Element(0x00 "" "" "" 220 100 0 100 0x00)
(
	Pin(0 150 50 20 "1" 0x101)
	Pin(300 150 50 20 "2" 0x01)

	ElementLine(0 150 100 150 10)
	ElementLine(200 150 300 150 10)

	ElementLine(100 150 200 100 10)
	ElementLine(200 100 200 200 10)
	ElementLine(200 200 100 150 10)
	ElementLine(100 100 100 200 10)
	Mark(0 150)
).fp(ALF300.fp,D8,unknown)

	
	
	
	
	
	
	
	
Element(0x00 "" "" "" 320 86 0 100 0x00)
(
	Pin(0 33 55 30 "1" 0x101)
	Pin(400 33 55 30 "2" 0x01)

	ElementLine(0 33 100 33 10)
	ElementLine(300 33 400 33 10)

	ElementLine(100 0 300 0 10)
	ElementLine(300 0 300 66 10)
	ElementLine(300 66 100 66 10)
	ElementLine(100 66 100 0 10)

	ElementLine(0 -44 0 -4 10)
	ElementLine(-20 -24 20 -24 10)
	ElementLine(380 -24 420 -24 10)
	

#	ElementArc(X1 Y 50 50 270 180 10)
#	ElementArc(X2 Y 50 50 90 180 10)

	Mark(100 33)
).fp(ACY400P.fp,C1,3.3)

	
	
	
	
Element(0x00 "" "" "" 220 100 0 100 0x00)
(
	Pin(0 150 50 20 "1" 0x101)
	Pin(300 150 50 20 "2" 0x01)

	ElementLine(0 150 100 150 10)
	ElementLine(200 150 300 150 10)

	ElementLine(100 150 200 100 10)
	ElementLine(200 100 200 200 10)
	ElementLine(200 200 100 150 10)
	ElementLine(100 100 100 200 10)
	Mark(0 150)
).fp(ALF300.fp,D7,unknown)

	
	
	
	
Element(0x00 "" "" "" 220 100 0 100 0x00)
(
	Pin(0 150 50 20 "1" 0x101)
	Pin(300 150 50 20 "2" 0x01)

	ElementLine(0 150 100 150 10)
	ElementLine(200 150 300 150 10)

	ElementLine(100 150 200 100 10)
	ElementLine(200 100 200 200 10)
	ElementLine(200 200 100 150 10)
	ElementLine(100 100 100 200 10)
	Mark(0 150)
).fp(ALF300.fp,D6,unknown)

	
	
	
	
Element(0x00 "" "" "" 220 100 0 100 0x00)
(
	Pin(0 150 50 20 "1" 0x101)
	Pin(300 150 50 20 "2" 0x01)

	ElementLine(0 150 100 150 10)
	ElementLine(200 150 300 150 10)

	ElementLine(100 150 200 100 10)
	ElementLine(200 100 200 200 10)
	ElementLine(200 200 100 150 10)
	ElementLine(100 100 100 200 10)
	Mark(0 150)
).fp(ALF300.fp,D5,unknown)

	
	
	
	
Element(0x00 "" "" "" 220 100 0 100 0x00)
(
	Pin(0 150 50 20 "1" 0x101)
	Pin(300 150 50 20 "2" 0x01)

	ElementLine(0 150 100 150 10)
	ElementLine(200 150 300 150 10)

	ElementLine(100 150 200 100 10)
	ElementLine(200 100 200 200 10)
	ElementLine(200 200 100 150 10)
	ElementLine(100 100 100 200 10)
	Mark(0 150)
).fp(ALF300.fp,D4,unknown)

	
	
	
	
Element(0x00 "" "" "" 220 100 0 100 0x00)
(
	Pin(0 150 50 20 "1" 0x101)
	Pin(300 150 50 20 "2" 0x01)

	ElementLine(0 150 100 150 10)
	ElementLine(200 150 300 150 10)

	ElementLine(100 150 200 100 10)
	ElementLine(200 100 200 200 10)
	ElementLine(200 200 100 150 10)
	ElementLine(100 100 100 200 10)
	Mark(0 150)
).fp(ALF300.fp,D3,unknown)

        
        
        
        
        
        
        
        
        
        

Element(0x00 "" "" "" 0  140 0 150 0x00)
(
        Pin(0 0 60 38 "1" 0x101)
        Pin(100 0 60 38 "2" 0x01)
        Pin(200 0 60 38 "3" 0x01)
        Pin(300 0 60 38 "4" 0x01)
        Pin(400 0 60 38 "5" 0x01)
        Pin(500 0 60 38 "6" 0x01)
        
        
        
        ElementLine(-75  -115 575 -115 10) 
        ElementLine(575  -115 575 135 10) 
        ElementLine(575  115 -75 115 10) 
        ElementLine(-75  135 -75 -115 10) 

        ElementLine(575  135 -75 135 10) 

        Mark(0 0)
).fp(MTA100_6.fp,J1,unknown)

	
	
	
	
Element(0x00 "" "" "" 220 100 0 100 0x00)
(
	Pin(0 150 50 20 "1" 0x101)
	Pin(300 150 50 20 "2" 0x01)

	ElementLine(0 150 100 150 10)
	ElementLine(200 150 300 150 10)

	ElementLine(100 150 200 100 10)
	ElementLine(200 100 200 200 10)
	ElementLine(200 200 100 150 10)
	ElementLine(100 100 100 200 10)
	Mark(0 150)
).fp(ALF300.fp,D2,unknown)

	
	
	
	
Element(0x00 "" "" "" 220 100 0 100 0x00)
(
	Pin(0 150 50 20 "1" 0x101)
	Pin(300 150 50 20 "2" 0x01)

	ElementLine(0 150 100 150 10)
	ElementLine(200 150 300 150 10)

	ElementLine(100 150 200 100 10)
	ElementLine(200 100 200 200 10)
	ElementLine(200 200 100 150 10)
	ElementLine(100 100 100 200 10)
	Mark(0 150)
).fp(ALF300.fp,D1,unknown)

	
	
	
	
	
	
	
	
Element(0x00 "" "" "" 320 86 0 100 0x00)
(
	Pin(0 33 55 30 "1" 0x101)
	Pin(400 33 55 30 "2" 0x01)

	ElementLine(0 33 100 33 10)
	ElementLine(300 33 400 33 10)

	ElementLine(100 0 300 0 10)
	ElementLine(300 0 300 66 10)
	ElementLine(300 66 100 66 10)
	ElementLine(100 66 100 0 10)

	

#	ElementArc(X1 Y 50 50 270 180 10)
#	ElementArc(X2 Y 50 50 90 180 10)

	Mark(100 33)
).fp(ACY400.fp,R9,unknown)
Element(0x00 "" "" "" 60 70 0 100 0x00)
(

# The JEDEC drawing shows a pin diameter of 16-21 mils
#
# The pin to pin spacing is 100 mils.
	Pin(50 200 72 42 "1" 0x101)
	Pin(150 200 72 42 "2" 0x01)
	Pin(250 200 72 42 "3" 0x01)

	ElementArc(150 200 100 100 315 270 10)
	ElementLine( 80 130 220 130 10)

	Mark(50 200)
).fp(TO92.fp,Q3,unknown)

	
	
	
	
	
	
Element(0x00 "" "" "" 800 0 0 100 0x00)
(
	Pin(200 400 60 50 "1" 0x101)
	Pin(600 400 60 50 "2" 0x01)
	ElementArc(400 400 400 400 0 360 10)

	

	Mark (200 400)
).fp(RCY400.fp,R8,470)
Element(0x00 "" "" "" 60 70 0 100 0x00)
(

# The JEDEC drawing shows a pin diameter of 16-21 mils
#
# The pin to pin spacing is 100 mils.
	Pin(50 200 72 42 "1" 0x101)
	Pin(150 200 72 42 "2" 0x01)
	Pin(250 200 72 42 "3" 0x01)

	ElementArc(150 200 100 100 315 270 10)
	ElementLine( 80 130 220 130 10)

	Mark(50 200)
).fp(TO92.fp,Q2,unknown)

	
	
	
	
	
	
	
	
Element(0x00 "" "" "" 320 86 0 100 0x00)
(
	Pin(0 33 55 30 "1" 0x101)
	Pin(400 33 55 30 "2" 0x01)

	ElementLine(0 33 100 33 10)
	ElementLine(300 33 400 33 10)

	ElementLine(100 0 300 0 10)
	ElementLine(300 0 300 66 10)
	ElementLine(300 66 100 66 10)
	ElementLine(100 66 100 0 10)

	

#	ElementArc(X1 Y 50 50 270 180 10)
#	ElementArc(X2 Y 50 50 90 180 10)

	Mark(100 33)
).fp(ACY400.fp,R12,unknown)

	
	
	
	
	
	
	
	
Element(0x00 "" "" "" 320 86 0 100 0x00)
(
	Pin(0 33 55 30 "1" 0x101)
	Pin(400 33 55 30 "2" 0x01)

	ElementLine(0 33 100 33 10)
	ElementLine(300 33 400 33 10)

	ElementLine(100 0 300 0 10)
	ElementLine(300 0 300 66 10)
	ElementLine(300 66 100 66 10)
	ElementLine(100 66 100 0 10)

	

#	ElementArc(X1 Y 50 50 270 180 10)
#	ElementArc(X2 Y 50 50 90 180 10)

	Mark(100 33)
).fp(ACY400.fp,R7,470)
Element(0x00 "" "" "" 60 70 0 100 0x00)
(

# The JEDEC drawing shows a pin diameter of 16-21 mils
#
# The pin to pin spacing is 100 mils.
	Pin(50 200 72 42 "1" 0x101)
	Pin(150 200 72 42 "2" 0x01)
	Pin(250 200 72 42 "3" 0x01)

	ElementArc(150 200 100 100 315 270 10)
	ElementLine( 80 130 220 130 10)

	Mark(50 200)
).fp(TO92.fp,Q1,unknown)

	
	
	
	
	
	
	
	
Element(0x00 "" "" "" 320 86 0 100 0x00)
(
	Pin(0 33 55 30 "1" 0x101)
	Pin(400 33 55 30 "2" 0x01)

	ElementLine(0 33 100 33 10)
	ElementLine(300 33 400 33 10)

	ElementLine(100 0 300 0 10)
	ElementLine(300 0 300 66 10)
	ElementLine(300 66 100 66 10)
	ElementLine(100 66 100 0 10)

	

#	ElementArc(X1 Y 50 50 270 180 10)
#	ElementArc(X2 Y 50 50 90 180 10)

	Mark(100 33)
).fp(ACY400.fp,R11,unknown)

	
	
	
	
	
	
	
	
Element(0x00 "" "" "" 320 86 0 100 0x00)
(
	Pin(0 33 55 30 "1" 0x101)
	Pin(400 33 55 30 "2" 0x01)

	ElementLine(0 33 100 33 10)
	ElementLine(300 33 400 33 10)

	ElementLine(100 0 300 0 10)
	ElementLine(300 0 300 66 10)
	ElementLine(300 66 100 66 10)
	ElementLine(100 66 100 0 10)

	

#	ElementArc(X1 Y 50 50 270 180 10)
#	ElementArc(X2 Y 50 50 90 180 10)

	Mark(100 33)
).fp(ACY400.fp,R6,10K)

Element(0x00 "" "" "" 160 10 3 100 0x00)
(
	Pin(50 50 60 28 "1" 0x101)
	Pin(50 150 60 28 "2" 0x01)
	Pin(50 250 60 28 "3" 0x01)
	Pin(50 350 60 28 "4" 0x01)
	Pin(50 450 60 28 "5" 0x01)
	Pin(50 550 60 28 "6" 0x01)
	Pin(50 650 60 28 "7" 0x01)
	Pin(50 750 60 28 "8" 0x01)
	Pin(50 850 60 28 "9" 0x01)
	
	ElementLine(  0 50   0 850 20)
	ElementLine(100 50 100 850 20)
	ElementLine(  0 100 100 100 10)
	ElementArc(50  50 50 50 180 180 20)
	ElementArc(50 850 50 50   0 180 20)
	Mark(50 50)
).fp(SIP9.fp,RP1,10K)

FileVersion[20070407]

PCB["" 600000 500000]

Grid[100.000000 0 0 0]
Cursor[0 0 0.000000]
PolyArea[200000000.000000]
Thermal[0.500000]
DRC[1000 1000 1000 1000 1500 1000]
Flags("nameonpcb,uniquename,clearnew,snappin")
Groups("1,c:2,s:3:4:5:6:7:8")
Styles["Signal,1000,3600,2000,1000:Power,2500,6000,3500,1000:Fat,4000,6000,3500,1000:Skinny,600,2402,1181,600"]

Symbol(' ' 18)
(
)
Symbol('!' 12)
(
	SymbolLine(0 45 0 50 8)
	SymbolLine(0 10 0 35 8)
)
Symbol('"' 12)
(
	SymbolLine(0 10 0 20 8)
	SymbolLine(10 10 10 20 8)
)
Symbol('#' 12)
(
	SymbolLine(0 35 20 35 8)
	SymbolLine(0 25 20 25 8)
	SymbolLine(15 20 15 40 8)
	SymbolLine(5 20 5 40 8)
)
Symbol('$' 12)
(
	SymbolLine(15 15 20 20 8)
	SymbolLine(5 15 15 15 8)
	SymbolLine(0 20 5 15 8)
	SymbolLine(0 20 0 25 8)
	SymbolLine(0 25 5 30 8)
	SymbolLine(5 30 15 30 8)
	SymbolLine(15 30 20 35 8)
	SymbolLine(20 35 20 40 8)
	SymbolLine(15 45 20 40 8)
	SymbolLine(5 45 15 45 8)
	SymbolLine(0 40 5 45 8)
	SymbolLine(10 10 10 50 8)
)
Symbol('%' 12)
(
	SymbolLine(0 15 0 20 8)
	SymbolLine(0 15 5 10 8)
	SymbolLine(5 10 10 10 8)
	SymbolLine(10 10 15 15 8)
	SymbolLine(15 15 15 20 8)
	SymbolLine(10 25 15 20 8)
	SymbolLine(5 25 10 25 8)
	SymbolLine(0 20 5 25 8)
	SymbolLine(0 50 40 10 8)
	SymbolLine(35 50 40 45 8)
	SymbolLine(40 40 40 45 8)
	SymbolLine(35 35 40 40 8)
	SymbolLine(30 35 35 35 8)
	SymbolLine(25 40 30 35 8)
	SymbolLine(25 40 25 45 8)
	SymbolLine(25 45 30 50 8)
	SymbolLine(30 50 35 50 8)
)
Symbol('&' 12)
(
	SymbolLine(0 45 5 50 8)
	SymbolLine(0 15 0 25 8)
	SymbolLine(0 15 5 10 8)
	SymbolLine(0 35 15 20 8)
	SymbolLine(5 50 10 50 8)
	SymbolLine(10 50 20 40 8)
	SymbolLine(0 25 25 50 8)
	SymbolLine(5 10 10 10 8)
	SymbolLine(10 10 15 15 8)
	SymbolLine(15 15 15 20 8)
	SymbolLine(0 35 0 45 8)
)
Symbol(''' 12)
(
	SymbolLine(0 20 10 10 8)
)
Symbol('(' 12)
(
	SymbolLine(0 45 5 50 8)
	SymbolLine(0 15 5 10 8)
	SymbolLine(0 15 0 45 8)
)
Symbol(')' 12)
(
	SymbolLine(0 10 5 15 8)
	SymbolLine(5 15 5 45 8)
	SymbolLine(0 50 5 45 8)
)
Symbol('*' 12)
(
	SymbolLine(0 20 20 40 8)
	SymbolLine(0 40 20 20 8)
	SymbolLine(0 30 20 30 8)
	SymbolLine(10 20 10 40 8)
)
Symbol('+' 12)
(
	SymbolLine(0 30 20 30 8)
	SymbolLine(10 20 10 40 8)
)
Symbol(',' 12)
(
	SymbolLine(0 60 10 50 8)
)
Symbol('-' 12)
(
	SymbolLine(0 30 20 30 8)
)
Symbol('.' 12)
(
	SymbolLine(0 50 5 50 8)
)
Symbol('/' 12)
(
	SymbolLine(0 45 30 15 8)
)
Symbol('0' 12)
(
	SymbolLine(0 45 5 50 8)
	SymbolLine(0 15 0 45 8)
	SymbolLine(0 15 5 10 8)
	SymbolLine(5 10 15 10 8)
	SymbolLine(15 10 20 15 8)
	SymbolLine(20 15 20 45 8)
	SymbolLine(15 50 20 45 8)
	SymbolLine(5 50 15 50 8)
	SymbolLine(0 40 20 20 8)
)
Symbol('1' 12)
(
	SymbolLine(5 50 15 50 8)
	SymbolLine(10 10 10 50 8)
	SymbolLine(0 20 10 10 8)
)
Symbol('2' 12)
(
	SymbolLine(0 15 5 10 8)
	SymbolLine(5 10 20 10 8)
	SymbolLine(20 10 25 15 8)
	SymbolLine(25 15 25 25 8)
	SymbolLine(0 50 25 25 8)
	SymbolLine(0 50 25 50 8)
)
Symbol('3' 12)
(
	SymbolLine(0 15 5 10 8)
	SymbolLine(5 10 15 10 8)
	SymbolLine(15 10 20 15 8)
	SymbolLine(20 15 20 45 8)
	SymbolLine(15 50 20 45 8)
	SymbolLine(5 50 15 50 8)
	SymbolLine(0 45 5 50 8)
	SymbolLine(5 30 20 30 8)
)
Symbol('4' 12)
(
	SymbolLine(0 30 20 10 8)
	SymbolLine(0 30 25 30 8)
	SymbolLine(20 10 20 50 8)
)
Symbol('5' 12)
(
	SymbolLine(0 10 20 10 8)
	SymbolLine(0 10 0 30 8)
	SymbolLine(0 30 5 25 8)
	SymbolLine(5 25 15 25 8)
	SymbolLine(15 25 20 30 8)
	SymbolLine(20 30 20 45 8)
	SymbolLine(15 50 20 45 8)
	SymbolLine(5 50 15 50 8)
	SymbolLine(0 45 5 50 8)
)
Symbol('6' 12)
(
	SymbolLine(15 10 20 15 8)
	SymbolLine(5 10 15 10 8)
	SymbolLine(0 15 5 10 8)
	SymbolLine(0 15 0 45 8)
	SymbolLine(0 45 5 50 8)
	SymbolLine(15 30 20 35 8)
	SymbolLine(0 30 15 30 8)
	SymbolLine(5 50 15 50 8)
	SymbolLine(15 50 20 45 8)
	SymbolLine(20 35 20 45 8)
)
Symbol('7' 12)
(
	SymbolLine(0 50 25 25 8)
	SymbolLine(25 10 25 25 8)
	SymbolLine(0 10 25 10 8)
)
Symbol('8' 12)
(
	SymbolLine(0 45 5 50 8)
	SymbolLine(0 35 0 45 8)
	SymbolLine(0 35 5 30 8)
	SymbolLine(5 30 15 30 8)
	SymbolLine(15 30 20 35 8)
	SymbolLine(20 35 20 45 8)
	SymbolLine(15 50 20 45 8)
	SymbolLine(5 50 15 50 8)
	SymbolLine(0 25 5 30 8)
	SymbolLine(0 15 0 25 8)
	SymbolLine(0 15 5 10 8)
	SymbolLine(5 10 15 10 8)
	SymbolLine(15 10 20 15 8)
	SymbolLine(20 15 20 25 8)
	SymbolLine(15 30 20 25 8)
)
Symbol('9' 12)
(
	SymbolLine(0 50 20 30 8)
	SymbolLine(20 15 20 30 8)
	SymbolLine(15 10 20 15 8)
	SymbolLine(5 10 15 10 8)
	SymbolLine(0 15 5 10 8)
	SymbolLine(0 15 0 25 8)
	SymbolLine(0 25 5 30 8)
	SymbolLine(5 30 20 30 8)
)
Symbol(':' 12)
(
	SymbolLine(0 25 5 25 8)
	SymbolLine(0 35 5 35 8)
)
Symbol(';' 12)
(
	SymbolLine(0 50 10 40 8)
	SymbolLine(10 25 10 30 8)
)
Symbol('<' 12)
(
	SymbolLine(0 30 10 20 8)
	SymbolLine(0 30 10 40 8)
)
Symbol('=' 12)
(
	SymbolLine(0 25 20 25 8)
	SymbolLine(0 35 20 35 8)
)
Symbol('>' 12)
(
	SymbolLine(0 20 10 30 8)
	SymbolLine(0 40 10 30 8)
)
Symbol('?' 12)
(
	SymbolLine(10 30 10 35 8)
	SymbolLine(10 45 10 50 8)
	SymbolLine(0 15 0 20 8)
	SymbolLine(0 15 5 10 8)
	SymbolLine(5 10 15 10 8)
	SymbolLine(15 10 20 15 8)
	SymbolLine(20 15 20 20 8)
	SymbolLine(10 30 20 20 8)
)
Symbol('@' 12)
(
	SymbolLine(0 10 0 40 8)
	SymbolLine(0 40 10 50 8)
	SymbolLine(10 50 40 50 8)
	SymbolLine(50 35 50 10 8)
	SymbolLine(50 10 40 0 8)
	SymbolLine(40 0 10 0 8)
	SymbolLine(10 0 0 10 8)
	SymbolLine(15 20 15 30 8)
	SymbolLine(15 30 20 35 8)
	SymbolLine(20 35 30 35 8)
	SymbolLine(30 35 35 30 8)
	SymbolLine(35 30 40 35 8)
	SymbolLine(35 30 35 15 8)
	SymbolLine(35 20 30 15 8)
	SymbolLine(20 15 30 15 8)
	SymbolLine(20 15 15 20 8)
	SymbolLine(40 35 50 35 8)
)
Symbol('A' 12)
(
	SymbolLine(0 15 0 50 8)
	SymbolLine(0 15 5 10 8)
	SymbolLine(5 10 20 10 8)
	SymbolLine(20 10 25 15 8)
	SymbolLine(25 15 25 50 8)
	SymbolLine(0 30 25 30 8)
)
Symbol('B' 12)
(
	SymbolLine(0 50 20 50 8)
	SymbolLine(20 50 25 45 8)
	SymbolLine(25 35 25 45 8)
	SymbolLine(20 30 25 35 8)
	SymbolLine(5 30 20 30 8)
	SymbolLine(5 10 5 50 8)
	SymbolLine(0 10 20 10 8)
	SymbolLine(20 10 25 15 8)
	SymbolLine(25 15 25 25 8)
	SymbolLine(20 30 25 25 8)
)
Symbol('C' 12)
(
	SymbolLine(5 50 20 50 8)
	SymbolLine(0 45 5 50 8)
	SymbolLine(0 15 0 45 8)
	SymbolLine(0 15 5 10 8)
	SymbolLine(5 10 20 10 8)
)
Symbol('D' 12)
(
	SymbolLine(5 10 5 50 8)
	SymbolLine(20 10 25 15 8)
	SymbolLine(25 15 25 45 8)
	SymbolLine(20 50 25 45 8)
	SymbolLine(0 50 20 50 8)
	SymbolLine(0 10 20 10 8)
)
Symbol('E' 12)
(
	SymbolLine(0 30 15 30 8)
	SymbolLine(0 50 20 50 8)
	SymbolLine(0 10 0 50 8)
	SymbolLine(0 10 20 10 8)
)
Symbol('F' 12)
(
	SymbolLine(0 10 0 50 8)
	SymbolLine(0 10 20 10 8)
	SymbolLine(0 30 15 30 8)
)
Symbol('G' 12)
(
	SymbolLine(20 10 25 15 8)
	SymbolLine(5 10 20 10 8)
	SymbolLine(0 15 5 10 8)
	SymbolLine(0 15 0 45 8)
	SymbolLine(0 45 5 50 8)
	SymbolLine(5 50 20 50 8)
	SymbolLine(20 50 25 45 8)
	SymbolLine(25 35 25 45 8)
	SymbolLine(20 30 25 35 8)
	SymbolLine(10 30 20 30 8)
)
Symbol('H' 12)
(
	SymbolLine(0 10 0 50 8)
	SymbolLine(25 10 25 50 8)
	SymbolLine(0 30 25 30 8)
)
Symbol('I' 12)
(
	SymbolLine(0 10 10 10 8)
	SymbolLine(5 10 5 50 8)
	SymbolLine(0 50 10 50 8)
)
Symbol('J' 12)
(
	SymbolLine(0 10 15 10 8)
	SymbolLine(15 10 15 45 8)
	SymbolLine(10 50 15 45 8)
	SymbolLine(5 50 10 50 8)
	SymbolLine(0 45 5 50 8)
)
Symbol('K' 12)
(
	SymbolLine(0 10 0 50 8)
	SymbolLine(0 30 20 10 8)
	SymbolLine(0 30 20 50 8)
)
Symbol('L' 12)
(
	SymbolLine(0 10 0 50 8)
	SymbolLine(0 50 20 50 8)
)
Symbol('M' 12)
(
	SymbolLine(0 10 0 50 8)
	SymbolLine(0 10 15 25 8)
	SymbolLine(15 25 30 10 8)
	SymbolLine(30 10 30 50 8)
)
Symbol('N' 12)
(
	SymbolLine(0 10 0 50 8)
	SymbolLine(0 10 0 15 8)
	SymbolLine(0 15 25 40 8)
	SymbolLine(25 10 25 50 8)
)
Symbol('O' 12)
(
	SymbolLine(0 15 0 45 8)
	SymbolLine(0 15 5 10 8)
	SymbolLine(5 10 15 10 8)
	SymbolLine(15 10 20 15 8)
	SymbolLine(20 15 20 45 8)
	SymbolLine(15 50 20 45 8)
	SymbolLine(5 50 15 50 8)
	SymbolLine(0 45 5 50 8)
)
Symbol('P' 12)
(
	SymbolLine(5 10 5 50 8)
	SymbolLine(0 10 20 10 8)
	SymbolLine(20 10 25 15 8)
	SymbolLine(25 15 25 25 8)
	SymbolLine(20 30 25 25 8)
	SymbolLine(5 30 20 30 8)
)
Symbol('Q' 12)
(
	SymbolLine(0 15 0 45 8)
	SymbolLine(0 15 5 10 8)
	SymbolLine(5 10 15 10 8)
	SymbolLine(15 10 20 15 8)
	SymbolLine(20 15 20 45 8)
	SymbolLine(15 50 20 45 8)
	SymbolLine(5 50 15 50 8)
	SymbolLine(0 45 5 50 8)
	SymbolLine(10 40 20 50 8)
)
Symbol('R' 12)
(
	SymbolLine(0 10 20 10 8)
	SymbolLine(20 10 25 15 8)
	SymbolLine(25 15 25 25 8)
	SymbolLine(20 30 25 25 8)
	SymbolLine(5 30 20 30 8)
	SymbolLine(5 10 5 50 8)
	SymbolLine(5 30 25 50 8)
)
Symbol('S' 12)
(
	SymbolLine(20 10 25 15 8)
	SymbolLine(5 10 20 10 8)
	SymbolLine(0 15 5 10 8)
	SymbolLine(0 15 0 25 8)
	SymbolLine(0 25 5 30 8)
	SymbolLine(5 30 20 30 8)
	SymbolLine(20 30 25 35 8)
	SymbolLine(25 35 25 45 8)
	SymbolLine(20 50 25 45 8)
	SymbolLine(5 50 20 50 8)
	SymbolLine(0 45 5 50 8)
)
Symbol('T' 12)
(
	SymbolLine(0 10 20 10 8)
	SymbolLine(10 10 10 50 8)
)
Symbol('U' 12)
(
	SymbolLine(0 10 0 45 8)
	SymbolLine(0 45 5 50 8)
	SymbolLine(5 50 15 50 8)
	SymbolLine(15 50 20 45 8)
	SymbolLine(20 10 20 45 8)
)
Symbol('V' 12)
(
	SymbolLine(0 10 0 40 8)
	SymbolLine(0 40 10 50 8)
	SymbolLine(10 50 20 40 8)
	SymbolLine(20 10 20 40 8)
)
Symbol('W' 12)
(
	SymbolLine(0 10 0 50 8)
	SymbolLine(0 50 15 35 8)
	SymbolLine(15 35 30 50 8)
	SymbolLine(30 10 30 50 8)
)
Symbol('X' 12)
(
	SymbolLine(0 10 0 15 8)
	SymbolLine(0 15 25 40 8)
	SymbolLine(25 40 25 50 8)
	SymbolLine(0 40 0 50 8)
	SymbolLine(0 40 25 15 8)
	SymbolLine(25 10 25 15 8)
)
Symbol('Y' 12)
(
	SymbolLine(0 10 0 15 8)
	SymbolLine(0 15 10 25 8)
	SymbolLine(10 25 20 15 8)
	SymbolLine(20 10 20 15 8)
	SymbolLine(10 25 10 50 8)
)
Symbol('Z' 12)
(
	SymbolLine(0 10 25 10 8)
	SymbolLine(25 10 25 15 8)
	SymbolLine(0 40 25 15 8)
	SymbolLine(0 40 0 50 8)
	SymbolLine(0 50 25 50 8)
)
Symbol('[' 12)
(
	SymbolLine(0 10 5 10 8)
	SymbolLine(0 10 0 50 8)
	SymbolLine(0 50 5 50 8)
)
Symbol('\' 12)
(
	SymbolLine(0 15 30 45 8)
)
Symbol(']' 12)
(
	SymbolLine(0 10 5 10 8)
	SymbolLine(5 10 5 50 8)
	SymbolLine(0 50 5 50 8)
)
Symbol('^' 12)
(
	SymbolLine(0 15 5 10 8)
	SymbolLine(5 10 10 15 8)
)
Symbol('_' 12)
(
	SymbolLine(0 50 20 50 8)
)
Symbol('a' 12)
(
	SymbolLine(15 30 20 35 8)
	SymbolLine(5 30 15 30 8)
	SymbolLine(0 35 5 30 8)
	SymbolLine(0 35 0 45 8)
	SymbolLine(0 45 5 50 8)
	SymbolLine(20 30 20 45 8)
	SymbolLine(20 45 25 50 8)
	SymbolLine(5 50 15 50 8)
	SymbolLine(15 50 20 45 8)
)
Symbol('b' 12)
(
	SymbolLine(0 10 0 50 8)
	SymbolLine(0 45 5 50 8)
	SymbolLine(5 50 15 50 8)
	SymbolLine(15 50 20 45 8)
	SymbolLine(20 35 20 45 8)
	SymbolLine(15 30 20 35 8)
	SymbolLine(5 30 15 30 8)
	SymbolLine(0 35 5 30 8)
)
Symbol('c' 12)
(
	SymbolLine(5 30 20 30 8)
	SymbolLine(0 35 5 30 8)
	SymbolLine(0 35 0 45 8)
	SymbolLine(0 45 5 50 8)
	SymbolLine(5 50 20 50 8)
)
Symbol('d' 12)
(
	SymbolLine(20 10 20 50 8)
	SymbolLine(15 50 20 45 8)
	SymbolLine(5 50 15 50 8)
	SymbolLine(0 45 5 50 8)
	SymbolLine(0 35 0 45 8)
	SymbolLine(0 35 5 30 8)
	SymbolLine(5 30 15 30 8)
	SymbolLine(15 30 20 35 8)
)
Symbol('e' 12)
(
	SymbolLine(5 50 20 50 8)
	SymbolLine(0 45 5 50 8)
	SymbolLine(0 35 0 45 8)
	SymbolLine(0 35 5 30 8)
	SymbolLine(5 30 15 30 8)
	SymbolLine(15 30 20 35 8)
	SymbolLine(0 40 20 40 8)
	SymbolLine(20 40 20 35 8)
)
Symbol('f' 10)
(
	SymbolLine(5 15 5 50 8)
	SymbolLine(5 15 10 10 8)
	SymbolLine(10 10 15 10 8)
	SymbolLine(0 30 10 30 8)
)
Symbol('g' 12)
(
	SymbolLine(15 30 20 35 8)
	SymbolLine(5 30 15 30 8)
	SymbolLine(0 35 5 30 8)
	SymbolLine(0 35 0 45 8)
	SymbolLine(0 45 5 50 8)
	SymbolLine(5 50 15 50 8)
	SymbolLine(15 50 20 45 8)
	SymbolLine(0 60 5 65 8)
	SymbolLine(5 65 15 65 8)
	SymbolLine(15 65 20 60 8)
	SymbolLine(20 30 20 60 8)
)
Symbol('h' 12)
(
	SymbolLine(0 10 0 50 8)
	SymbolLine(0 35 5 30 8)
	SymbolLine(5 30 15 30 8)
	SymbolLine(15 30 20 35 8)
	SymbolLine(20 35 20 50 8)
)
Symbol('i' 10)
(
	SymbolLine(0 20 0 25 8)
	SymbolLine(0 35 0 50 8)
)
Symbol('j' 10)
(
	SymbolLine(5 20 5 25 8)
	SymbolLine(5 35 5 60 8)
	SymbolLine(0 65 5 60 8)
)
Symbol('k' 12)
(
	SymbolLine(0 10 0 50 8)
	SymbolLine(0 35 15 50 8)
	SymbolLine(0 35 10 25 8)
)
Symbol('l' 10)
(
	SymbolLine(0 10 0 45 8)
	SymbolLine(0 45 5 50 8)
)
Symbol('m' 12)
(
	SymbolLine(5 35 5 50 8)
	SymbolLine(5 35 10 30 8)
	SymbolLine(10 30 15 30 8)
	SymbolLine(15 30 20 35 8)
	SymbolLine(20 35 20 50 8)
	SymbolLine(20 35 25 30 8)
	SymbolLine(25 30 30 30 8)
	SymbolLine(30 30 35 35 8)
	SymbolLine(35 35 35 50 8)
	SymbolLine(0 30 5 35 8)
)
Symbol('n' 12)
(
	SymbolLine(5 35 5 50 8)
	SymbolLine(5 35 10 30 8)
	SymbolLine(10 30 15 30 8)
	SymbolLine(15 30 20 35 8)
	SymbolLine(20 35 20 50 8)
	SymbolLine(0 30 5 35 8)
)
Symbol('o' 12)
(
	SymbolLine(0 35 0 45 8)
	SymbolLine(0 35 5 30 8)
	SymbolLine(5 30 15 30 8)
	SymbolLine(15 30 20 35 8)
	SymbolLine(20 35 20 45 8)
	SymbolLine(15 50 20 45 8)
	SymbolLine(5 50 15 50 8)
	SymbolLine(0 45 5 50 8)
)
Symbol('p' 12)
(
	SymbolLine(5 35 5 65 8)
	SymbolLine(0 30 5 35 8)
	SymbolLine(5 35 10 30 8)
	SymbolLine(10 30 20 30 8)
	SymbolLine(20 30 25 35 8)
	SymbolLine(25 35 25 45 8)
	SymbolLine(20 50 25 45 8)
	SymbolLine(10 50 20 50 8)
	SymbolLine(5 45 10 50 8)
)
Symbol('q' 12)
(
	SymbolLine(20 35 20 65 8)
	SymbolLine(15 30 20 35 8)
	SymbolLine(5 30 15 30 8)
	SymbolLine(0 35 5 30 8)
	SymbolLine(0 35 0 45 8)
	SymbolLine(0 45 5 50 8)
	SymbolLine(5 50 15 50 8)
	SymbolLine(15 50 20 45 8)
)
Symbol('r' 12)
(
	SymbolLine(5 35 5 50 8)
	SymbolLine(5 35 10 30 8)
	SymbolLine(10 30 20 30 8)
	SymbolLine(0 30 5 35 8)
)
Symbol('s' 12)
(
	SymbolLine(5 50 20 50 8)
	SymbolLine(20 50 25 45 8)
	SymbolLine(20 40 25 45 8)
	SymbolLine(5 40 20 40 8)
	SymbolLine(0 35 5 40 8)
	SymbolLine(0 35 5 30 8)
	SymbolLine(5 30 20 30 8)
	SymbolLine(20 30 25 35 8)
	SymbolLine(0 45 5 50 8)
)
Symbol('t' 10)
(
	SymbolLine(5 10 5 45 8)
	SymbolLine(5 45 10 50 8)
	SymbolLine(0 25 10 25 8)
)
Symbol('u' 12)
(
	SymbolLine(0 30 0 45 8)
	SymbolLine(0 45 5 50 8)
	SymbolLine(5 50 15 50 8)
	SymbolLine(15 50 20 45 8)
	SymbolLine(20 30 20 45 8)
)
Symbol('v' 12)
(
	SymbolLine(0 30 0 40 8)
	SymbolLine(0 40 10 50 8)
	SymbolLine(10 50 20 40 8)
	SymbolLine(20 30 20 40 8)
)
Symbol('w' 12)
(
	SymbolLine(0 30 0 45 8)
	SymbolLine(0 45 5 50 8)
	SymbolLine(5 50 10 50 8)
	SymbolLine(10 50 15 45 8)
	SymbolLine(15 30 15 45 8)
	SymbolLine(15 45 20 50 8)
	SymbolLine(20 50 25 50 8)
	SymbolLine(25 50 30 45 8)
	SymbolLine(30 30 30 45 8)
)
Symbol('x' 12)
(
	SymbolLine(0 30 20 50 8)
	SymbolLine(0 50 20 30 8)
)
Symbol('y' 12)
(
	SymbolLine(0 30 0 45 8)
	SymbolLine(0 45 5 50 8)
	SymbolLine(20 30 20 60 8)
	SymbolLine(15 65 20 60 8)
	SymbolLine(5 65 15 65 8)
	SymbolLine(0 60 5 65 8)
	SymbolLine(5 50 15 50 8)
	SymbolLine(15 50 20 45 8)
)
Symbol('z' 12)
(
	SymbolLine(0 30 20 30 8)
	SymbolLine(0 50 20 30 8)
	SymbolLine(0 50 20 50 8)
)
Symbol('{' 12)
(
	SymbolLine(5 15 10 10 8)
	SymbolLine(5 15 5 25 8)
	SymbolLine(0 30 5 25 8)
	SymbolLine(0 30 5 35 8)
	SymbolLine(5 35 5 45 8)
	SymbolLine(5 45 10 50 8)
)
Symbol('|' 12)
(
	SymbolLine(0 10 0 50 8)
)
Symbol('}' 12)
(
	SymbolLine(0 10 5 15 8)
	SymbolLine(5 15 5 25 8)
	SymbolLine(5 25 10 30 8)
	SymbolLine(5 35 10 30 8)
	SymbolLine(5 35 5 45 8)
	SymbolLine(0 50 5 45 8)
)
Symbol('~' 12)
(
	SymbolLine(0 35 5 30 8)
	SymbolLine(5 30 10 30 8)
	SymbolLine(10 30 15 35 8)
	SymbolLine(15 35 20 35 8)
	SymbolLine(20 35 25 30 8)
)

Element["hidename" "LED4-1.fp" "DSP1" "unknown" 10900 84500 0 0 0 100
""]
(
	Pin[0 0 3600 0 4200 2000 "" "1" "selected,square,edge2"]
	Pin[12400 0 3600 2000 4200 2000 "" "2" "edge2"]
	Pin[24800 0 3600 2000 4200 2000 "" "3" "edge2"]
	Pin[37200 0 3600 2000 4200 2000 "" "4" "edge2"]
	Pin[49600 0 3600 2000 4200 2000 "" "5" "edge2"]
	Pin[62000 0 3600 2000 4200 2000 "" "6" "edge2"]
	Pin[74400 0 3600 2000 4200 2000 "" "7" "edge2"]
	Pin[86800 0 3600 2000 4200 2000 "" "8" "edge2"]
	Pin[99200 0 3600 2000 4200 2000 "" "9" "edge2"]
	Pin[111600 0 3600 2000 4200 2000 "" "10" "edge2"]
	Pin[124000 0 3600 2000 4200 2000 "" "11" "edge2"]
	Pin[136400 0 3600 2000 4200 2000 "" "12" "edge2"]
	Pin[148800 0 3600 2000 4200 2000 "" "13" "edge2"]
	Pin[161200 0 3600 2000 4200 2000 "" "14" "edge2"]
	Pin[173600 0 3600 2000 4200 2000 "" "15" "edge2"]
	Pin[186000 100 3600 2000 4200 2000 "" "16" "edge2"]
	ElementLine [-7000 16000 -7000 -83900 1000]
	ElementLine [192900 16000 -6900 16100 1000]
	ElementLine [-6900 -84000 192900 -84000 1000]
	ElementLine [-6900 -14000 192600 -14000 1000]
	ElementLine [193000 -83900 193000 16000 1000]

	)
Layer(1 "component")
(
	Text[35500 33200 0 100 "needs assign pin number & name" ""]
)
Layer(2 "solder")
(
)
Layer(3 "GND")
(
)
Layer(4 "power")
(
)
Layer(5 "signal1")
(
)
Layer(6 "signal2")
(
)
Layer(7 "signal3")
(
)
Layer(8 "signal4")
(
)
Layer(9 "silk")
(
)
Layer(10 "silk")
(
)

	
	
	
	
	
	
	
	
Element(0x00 "" "" "" 320 86 0 100 0x00)
(
	Pin(0 33 55 30 "1" 0x101)
	Pin(400 33 55 30 "2" 0x01)

	ElementLine(0 33 100 33 10)
	ElementLine(300 33 400 33 10)

	ElementLine(100 0 300 0 10)
	ElementLine(300 0 300 66 10)
	ElementLine(300 66 100 66 10)
	ElementLine(100 66 100 0 10)

	

#	ElementArc(X1 Y 50 50 270 180 10)
#	ElementArc(X2 Y 50 50 90 180 10)

	Mark(100 33)
).fp(ACY400.fp,R10,unknown)

	
	
	
	
	
	
Element(0x00 "" "" "" 800 0 0 100 0x00)
(
	Pin(200 400 60 50 "1" 0x101)
	Pin(600 400 60 50 "2" 0x01)
	ElementArc(400 400 400 400 0 360 10)

	

	Mark (200 400)
).fp(RCY400.fp,R3,470)

	
	
	
	
	
	
	
	
Element(0x00 "" "" "" 320 86 0 100 0x00)
(
	Pin(0 33 55 30 "1" 0x101)
	Pin(400 33 55 30 "2" 0x01)

	ElementLine(0 33 100 33 10)
	ElementLine(300 33 400 33 10)

	ElementLine(100 0 300 0 10)
	ElementLine(300 0 300 66 10)
	ElementLine(300 66 100 66 10)
	ElementLine(100 66 100 0 10)

	

#	ElementArc(X1 Y 50 50 270 180 10)
#	ElementArc(X2 Y 50 50 90 180 10)

	Mark(100 33)
).fp(ACY400.fp,R2,470)

	
	
	
	
	
	
	
	
Element(0x00 "" "" "" 320 86 0 100 0x00)
(
	Pin(0 33 55 30 "1" 0x101)
	Pin(400 33 55 30 "2" 0x01)

	ElementLine(0 33 100 33 10)
	ElementLine(300 33 400 33 10)

	ElementLine(100 0 300 0 10)
	ElementLine(300 0 300 66 10)
	ElementLine(300 66 100 66 10)
	ElementLine(100 66 100 0 10)

	

#	ElementArc(X1 Y 50 50 270 180 10)
#	ElementArc(X2 Y 50 50 90 180 10)

	Mark(100 33)
).fp(ACY400.fp,R1,47K)

Element["" "digi_sw4-1.fp" "SW2" "unknown" 50000 50000 0 0 0 100 ""]
(
	Pin[99000 35600 7600 2000 8200 2000 "" "5a" "edge2"]
	Pin[99000 51000 7600 2000 8200 2000 "" "6a" "edge2"]
	Pin[99000 20200 7600 2000 8200 2000 "" "4a" "edge2"]
	Pin[99000 4800 7600 2000 8200 2000 "" "3a" "edge2"]
	Pin[99000 -10600 7600 2000 8200 2000 "" "2a" "edge2"]
	Pin[99000 -26000 7600 2000 8200 2000 "" "1a" "edge2"]
	Pin[49200 35600 7600 2000 8200 2000 "" "5b" "edge2"]
	Pin[49200 51000 7600 2000 8200 2000 "" "6b" "edge2"]
	Pin[49200 20200 7600 2000 8200 2000 "" "4b" "edge2"]
	Pin[49200 4800 7600 2000 8200 2000 "" "3b" "edge2"]
	Pin[49200 -10600 7600 2000 8200 2000 "" "2b" "edge2"]
	Pin[49200 -26000 7600 2000 8200 2000 "" "1b" "edge2"]
	Pin[-26000 35600 7600 2000 8200 2000 "" "5c" "edge2"]
	Pin[-76000 -26000 7600 2000 8200 2000 "" "1d" "edge2"]
	Pin[-76000 -10600 7600 2000 8200 2000 "" "2d" "edge2"]
	Pin[-76000 4800 7600 2000 8200 2000 "" "3d" "edge2"]
	Pin[-76000 20200 7600 2000 8200 2000 "" "4d" "edge2"]
	Pin[-76000 51000 7600 2000 8200 2000 "" "6d" "edge2"]
	Pin[-76000 35600 7600 2000 8200 2000 "" "5d" "edge2"]
	Pin[-26000 -26000 7600 2000 8200 2000 "" "1c" "edge2"]
	Pin[-26000 -10600 7600 2000 8200 2000 "" "2c" "edge2"]
	Pin[-26000 4800 7600 2000 8200 2000 "" "3c" "edge2"]
	Pin[-26000 20200 7600 2000 8200 2000 "" "4c" "edge2"]
	Pin[-26000 51000 7600 2000 8200 2000 "" "6c" "edge2"]
	ElementLine [-122000 70000 -122000 -45800 1000]
	ElementLine [118200 69000 -122000 69000 1000]
	ElementLine [118200 -45800 118200 68000 1000]
	ElementLine [-123000 -44800 117200 -44800 1000]

	)
Layer(1 "solder")
(
)
Layer(2 "GND-sldr")
(
)
Layer(3 "Vcc-sldr")
(
)
Layer(4 "component")
(
)
Layer(5 "GND-comp")
(
)
Layer(6 "Vcc-comp")
(
)
Layer(7 "unused")
(
)
Layer(8 "unused")
(
)  
 



_______________________________________________
geda-user mailing list
geda-user@xxxxxxxxxxxxxx
http://www.seul.org/cgi-bin/mailman/listinfo/geda-user
Follow-Ups:
- Re: gEDA-user: gsch2pcb output file does not load on pcb
  - From: DJ Delorie
Prev by Author: gEDA-user: PCB: connect line to rectangle
Next by Author: gEDA-user: gsch2pcb output file does not load on pcb
Previous by thread: Re: gEDA-user: FWD: Applying for GSoC2009
Next by thread: Re: gEDA-user: gsch2pcb output file does not load on pcb
Index(es):
- Author
- Thread