Mail Thread Index
- gEDA-user: wcalc-1.1 released,
Dan McMahill
- Re: gEDA-user: Stupid symbol tricks,
Stefan Salewski
- Re: gEDA-user: Do we need --enable-deprecated for guile 1.8.5 to compile libgeda 1.4.3?,
Peter TB Brett
- gEDA-user: Meaning of --with-x and --without-gui for pcb,
Stefan Salewski
- gEDA-user: PostScript output - moving off-center?,
gdedwards
- gEDA-user: pcb, how to suppress TCL/TK QFP footprint builder?,
Stefan Salewski
- gEDA-user: pcb printing,
Dan McMahill
- Re: gEDA-user: single-sided boards,
David SMITH
- gEDA-user: PCB, nelma export needs libgd?,
Stefan Salewski
- gEDA-user: PCB -- a remark to png, jpeg and gif export,
Stefan Salewski
- gEDA-user: PCB, two simple questions,
Stefan Salewski
- gEDA-user: Grid Units in schematic editor,
Alex Huntley
- gEDA-user: [PATCH 0/4][PCB] Color setting updates,
Peter Tyser
- gEDA-user: attribute edit 'ee',
Josh Jordan
- gEDA-user: Using .global statements in GNUcap and mult transistors,
Yamazaki R2
- Re: gEDA-user: gEDA-bug: gschem segfault,
Peter Clifton
- gEDA-user: gsch2pcb attributes transfer,
Duncan Drennan
- gEDA-user: Icarus Verilog: How to exit simulator with non-zero status?,
Patrick Doyle
- gEDA-user: PCB Build Errors,
Bob Paddock
- gEDA-user: gnucap tranient response (noisy nodes),
Yamazaki R2
- gEDA-user: way to 'save symbol as' ?,
Josh Jordan
- gEDA-user: pcb segmentation fault,
Levente Kovacs
- Re: gEDA-user: pcb segmentation fault,
Levente Kovacs
- Re: gEDA-user: pcb segmentation fault,
DJ Delorie
- Re: gEDA-user: pcb segmentation fault,
Ineiev
- Re: gEDA-user: pcb segmentation fault,
Peter Clifton
- Re: gEDA-user: pcb segmentation fault,
DJ Delorie
- Re: gEDA-user: pcb segmentation fault,
Peter Clifton
- Re: gEDA-user: pcb segmentation fault,
DJ Delorie
- gEDA-user: Thindraw and the HID interface... [WAS: Re: pcb segmentation fault],
Peter Clifton
- Re: gEDA-user: Thindraw and the HID interface... [WAS: Re: pcb segmentation fault],
DJ Delorie
- Re: gEDA-user: Thindraw and the HID interface... [WAS: Re: pcb segmentation fault],
Peter C.J. Clifton
- Re: gEDA-user: Thindraw and the HID interface... [WAS: Re: pcb segmentation fault],
John Griessen
- Re: gEDA-user: Thindraw and the HID interface... [WAS: Re: pcb segmentation fault],
Steven Michalske
- Re: gEDA-user: Thindraw and the HID interface... [WAS: Re: pcb segmentation fault],
Peter C.J. Clifton
- Re: gEDA-user: Thindraw and the HID interface... [WAS: Re: pcb segmentation fault],
Steven Michalske
- Re: gEDA-user: Thindraw and the HID interface... [WAS: Re: pcb segmentation fault],
Peter C.J. Clifton
- Re: gEDA-user: Thindraw and the HID interface... [WAS: Re: pcb segmentation fault],
John Griessen
- Re: gEDA-user: Thindraw and the HID interface... [WAS: Re: pcb segmentation fault],
Steven Michalske
- gEDA-user: PCB, configure: error: batch is not a valid gui,
Stefan Salewski
- Re: gEDA-user: PCB, configure: error: batch is not a valid gui,
Peter Clifton
- Re: gEDA-user: PCB, configure: error: batch is not a valid gui,
DJ Delorie
- Re: gEDA-user: PCB, configure: error: batch is not a valid gui,
Stefan Salewski
- Re: gEDA-user: PCB, configure: error: batch is not a valid gui,
DJ Delorie
- Re: gEDA-user: PCB, configure: error: batch is not a valid gui,
Stefan Salewski
- Re: gEDA-user: PCB, configure: error: batch is not a valid gui,
DJ Delorie
- Re: gEDA-user: PCB, configure: error: batch is not a valid gui,
Stefan Salewski
- Re: gEDA-user: PCB, configure: error: batch is not a valid gui,
DJ Delorie
- Re: gEDA-user: PCB, configure: error: batch is not a valid gui,
Stefan Salewski
- Re: gEDA-user: PCB, configure: error: batch is not a valid gui,
Stefan Salewski
- Re: gEDA-user: PCB, configure: error: batch is not a valid gui,
Stefan Salewski
- Re: gEDA-user: PCB, configure: error: batch is not a valid gui,
Dan McMahill
- Re: gEDA-user: PCB, configure: error: batch is not a valid gui,
Stefan Salewski
- Re: gEDA-user: PCB, configure: error: batch is not a valid gui,
Stefan Salewski
- gEDA-user: Home PCB and Liquid Tin,
Rob Butts
- gEDA-user: TQFP adapter,
Rob Butts
- Re: gEDA-user: geda-user Digest, Vol 34, Issue 18,
Yamazaki R2
- Re: gEDA-user: Using .global statements in GNUcap and mult,
Yamazaki R2
- gEDA-user: What is the current procedure and location to submit patches for PCB?,
Bob Paddock
- Re: gEDA-user: What is the current procedure and location to submit patches for PCB?,
DJ Delorie
- Re: gEDA-user: What is the current procedure and location to submit patches for PCB?,
Bob Paddock
- Re: gEDA-user: What is the current procedure and location to submit patches for PCB?,
DJ Delorie
- Re: gEDA-user: What is the current procedure and location to submit patches for PCB?,
Bob Paddock
- Re: gEDA-user: What is the current procedure and location to submit patches for PCB?,
DJ Delorie
- Re: gEDA-user: What is the current procedure and location to submit patches for PCB?,
Bob Paddock
- Re: gEDA-user: What is the current procedure and location to submit patches for PCB?,
DJ Delorie
- Re: gEDA-user: What is the current procedure and location to submit patches for PCB?,
Larry Doolittle
- Re: gEDA-user: What is the current procedure and location to submit patches for PCB?,
DJ Delorie
- Re: gEDA-user: What is the current procedure and location to submit patches for PCB?,
Dave N6NZ
- Re: gEDA-user: What is the current procedure and location to submit patches for PCB?,
Dan McMahill
- Re: gEDA-user: What is the current procedure and location to submit patches for PCB?,
Mark
- Re: gEDA-user: What is the current procedure and location to submit patches for PCB?,
Bob Paddock
- Re: gEDA-user: What is the current procedure and location to submit patches for PCB?,
Peter Clifton
- Re: gEDA-user: What is the current procedure and location to submit patches for PCB?,
Bob Paddock
- Re: gEDA-user: What is the current procedure and location to submit patches for PCB?,
Peter Tyser
- gEDA-user: ps.c alignment lines multiplies by zero?,
Bob Paddock
- gEDA-user: Cannot find gdk-pixbuf, building gaf from source,
Shakthi Kannan
- gEDA-user: GSchem in CMOS Analog IC context?,
daledouglas
- gEDA-user: pcb- no library dialog window on startup,
Josh Jordan
- gEDA-user: Is it possible to run a command from the toolbar in gschem such as this? (Screenshot),
Yamazaki R2
- gEDA-user: How to fit REFDES on PCB with Hierarchy,
gene
- gEDA-user: gschem 1.4.3 and LINGUAS="de en",
Stefan Salewski
- Re: gEDA-user: Is it possible to run a command from the from the toolbar in gschem such as this? (Screenshot) (Peter Clifton),
Yamazaki R2
- gEDA-user: spirals challenge,
DJ Delorie
- gEDA-user: Trace Impedance with wcalc,
Marcel . Schmedes . EXTERN
- gEDA-user: Unusual auto-via behaviour in PCB,
andrew whyte
- gEDA-user: Copper for PCBs,
Rob Butts
- gEDA-user: PostScript patch for Windows ps.c attached,
Bob Paddock
- gEDA-user: gsch2pcb use pcb library preferences patch,
Josh Jordan
- gEDA-user: gschem crashes if I close a modified file without saving,
Matt Ettus
- gEDA-user: [Icarus Verilog] How to synthesis a flip-flop with asynchronous reset,
温宇杰
- gEDA-user: pinseq - pinnumber?,
Philipp Klaus Krause
- gEDA-user: Updated gschem, gattrib, libgeda35 .po Russian translation,
Sergey Alyoshin
- gEDA-user: pcb 20081128 build gives directory pcb and pcb-20081128 in /usr/share,
Stefan Salewski
- gEDA-user: PCB: simple FreeType fonts implementation,
Ineiev
- gEDA-user: datasheet,
Patrick Dupre
- gEDA-user: How to plot in batch mode (ngspice),
joseda
- gEDA-user: iverilog synthesis,
Patrick Doyle
- gEDA-user: PCB: connect line to rectangle,
Transistor Toaster
- gEDA-user: geda 1.4.3: make doxygen ?,
Stefan Salewski
- gEDA-user: Icarus Verilog: 20081118 snapshot FPGA synthesis on Windows,
Patrick Doyle
- gEDA-user: Ngspice help,
joseda
- gEDA-user: ARDUINO design using GEDA,
jeffrey antony
- gEDA-user: Gnetlist can't find files?,
daledouglas
- gEDA-user: Converting square/circular pads to oval(elliptical) pads,
jeffrey antony
- gEDA-user: script to get part info from digikey,
Josh Jordan
- gEDA-user: gpleda.org hosting outage,
Ales Hvezda
- gEDA-user: PCB Can't draw on Silk Layer,
gene glick
- gEDA-user: FWD: Applying for GSoC2009,
sha liu
- gEDA-user: gsch2pcb output file does not load on pcb,
vincent Onelli
- gEDA-user: powermeter update,
DJ Delorie
- gEDA-user: PCB thermal width,
Duncan Drennan
- gEDA-user: pcb drc checks before releasing pcb || cost diff. from vendor to vendor,
S. Aguinaga
- gEDA-user: An example for other uses of gEDA: visual programming,
Oliver Florian
- gEDA-user: Some minor contributions: automatic subsheet symbols,
Oliver Florian
- gEDA-user: Install ngspice rework-18 on OS X 10.5.6?,
daledouglas
- gEDA-user: mcu to sdram interface project,
DJ Delorie
- Re: gEDA-user: geda-user Digest, Vol 34, Issue 49,
vincent Onelli
- gEDA-user: How to Install ngspice rework-18 on OS X 10.5.6,
daledouglas
- gEDA-user: sd card,
DJ Delorie
- gEDA-user: PCB footprints,
vsrk sarma
- gEDA-user: Symbol style recommendations,
maillist . peter
- gEDA-user: Bad news about gEDA's participation in GSoC 2009,
Stuart Brorson
- Re: gEDA-user: Bad news about gEDA's participation in GSoC 2009,
John Griessen
- Re: gEDA-user: Bad news about gEDA's participation in GSoC 2009,
John Griessen
- Re: gEDA-user: Bad news about gEDA's participation in GSoC 2009,
Steve Meier
- Re: gEDA-user: Bad news about gEDA's participation in GSoC 2009,
DJ Delorie
- Re: gEDA-user: Bad news about gEDA's participation in GSoC 2009,
John Griessen
- Re: gEDA-user: Bad news about gEDA's participation in GSoC 2009,
Kai-Martin Knaak
- Re: gEDA-user: Bad news about gEDA's participation in GSoC 2009,
Stefan Salewski
- Re: gEDA-user: Bad news about gEDA's participation in GSoC 2009,
Anthony Blake
- Re: gEDA-user: Bad news about gEDA's participation in GSoC 2009,
Stefan Salewski
- Re: gEDA-user: Bad news about gEDA's participation in GSoC 2009,
Windell H. Oskay
- Re: gEDA-user: Bad news about gEDA's participation in GSoC 2009,
DJ Delorie
- Re: gEDA-user: Bad news about gEDA's participation in GSoC 2009,
John Griessen
- Re: gEDA-user: Bad news about gEDA's participation in GSoC 2009,
Dan McMahill
- Re: gEDA-user: Bad news about gEDA's participation in GSoC 2009,
al davis
- Re: gEDA-user: Bad news about gEDA's participation in GSoC 2009,
Sha Liu
- Re: gEDA-user: Bad news about gEDA's participation in GSoC 2009,
al davis
- <Possible follow-ups>
- Re: gEDA-user: Bad news about gEDA's participation in GSoC 2009,
Josh Jordan
- gEDA-user: [PCB] action context patch,
igor2
- gEDA-user: symbol,
Levente
- gEDA-user: [PATCH] gschem: Add name completion to attribute edit dialog,
Krzysztof Kościuszkiewicz
- gEDA-user: GNUdino V0.2 (ARDUINO Board Designed using gEDA),
jeffrey_antony
- gEDA-user: error: 'TOPLEVEL' has no member named 'unnamed_busname',
Shakthi Kannan
- gEDA-user: Icarus Verilog Release 0.9.1,
Stephen Williams
- gEDA-user: mail to Stephen Williams,
Sascha Silbe
- gEDA-user: PDF or bitmap -> footprint conversion (HOWTO),
Stanislav Brabec
- gEDA-user: DJ in CC again,
DJ Delorie
- gEDA-user: "go",
DJ Delorie
- gEDA-user: [pcb GTK HID] Updated patch for filters in filechooser dialog,
Bert Timmerman
- gEDA-user: geda:data_plotting_improvements,
Arnaud Gardelein
- gEDA-user: PALs GALs and SPLDs going the way of the Dodo?,
Ormund Williams
- Re: gEDA-user: Yet another footprint generator available,
Stefan Salewski
- gEDA-user: drill sizes,
gene glick
- gEDA-user: silk on other side of board,
gene glick
- gEDA-user: Gnucap and summer of code.,
al davis
- gEDA-user: gafrc question,
gene glick
- gEDA-user: DRC UI mockup,
Peter Clifton
- gEDA-user: gEDA/gaf unstable/development snapshot 1.5.2-20090328 released!,
Ales Hvezda
- gEDA-user: PCB painting has slowed down,
gene glick
- gEDA-user: gschem Bus tutorial,
Kingston Co.
- gEDA-user: unusual feature in pcb,
andrew whyte
- gEDA-user: stretching components,
richard.bown@xxxxxxxxxxxxxxxx
- gEDA-user: space in attribute,
Levente Kovacs
- gEDA-user: Saving vdb in rawfile output in ngspice,
Yamazaki R2
- gEDA-user: symbol for atmega168 dip,
John Cahill
- gEDA-user: pcb deb (and or other OS) dev package,
igor2
- gEDA-user: co-ordinates PCB,
richard.bown@xxxxxxxxxxxxxxxx
- gEDA-user: Reverse engineering with PCB?,
Csanyi Pal
- gEDA-user: a bug in gspiceui 0.9.93 Alpha?,
wing
- gEDA-user: the joy and sadness of new boards,
DJ Delorie
Mail converted by MHonArc