Re: gEDA-user: pcb doesn't find my pins

[Stefan Salewski <mail@xxxxxxxxxxxx>]

On Sat, 2010-03-06 at 08:50 -0500, Jim wrote:
> In case anyone is interested, here's the entire schematic:
> 
> http://fayettedigital.com/images/sch2.jpg
> 

Sorry, can not really help you.
(For the experts it may be easier if you make all data files available,
not only pictures.)

What I do in such cases: Delete part of the schematics, start from
scratch, exchange symbols, exchange self made components by similar
devices shipped with geda...
Keyword: Minimal example which shows the problem, available with all
source file, so developers can test it.

One reason for shorts: Some symbols have hidden power pins, i.e. some
logic symbols, but I think that is not the problem in your case.

Some remarks: You have VCC as input of voltage regulator and at pin 40
of your chip. Is this intended?

Not related to netlist: Most people use capital "F" for farad. 0.1uF at
input terminal and 10uF at output is not too common, but it may be fine
for your regulator type. You may check with datasheet.

Sorry, no real idea of your problem.
Best regards

Stefan Salewski




_______________________________________________
geda-user mailing list
geda-user@xxxxxxxxxxxxxx
http://www.seul.org/cgi-bin/mailman/listinfo/geda-user