[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: gEDA-user: Two things ... or actually, three

On Mon, 2011-05-30 at 22:59 +0200, Richard Rasker wrote:

> Um, OK ... but somehow, my older xgsch2pcb (or perhaps just the older
> PCB build) doesn't recognize the layout file edited with the newer PCB
> version any more. As a result, I haven't succeeded in updating any
> changes in my schematic into the newer PCB version (also see below).
> When I try updating the schematic now with xgsch2pcb, I get a completely
> new PCB window with all the elements in the upper left corner, and not
> the 99% completed and routed layout I have.

Hmm, if you have updated gEDA / gnetlist etc.. from git this year, but
not recently - you might want to try rebuilding that from a current git

I'm not sure if it fits your symptoms or not, but there was a nasty bug
which sometimes caused problems in gsch2pcb, which was fixed recently.
(xgsch2pcb uses gsch2pcb internally).

If you're still stuck (and are able / willing to do so), send me a
tarball with the design you're having problems with and I'll see what I
can do.

Peter Clifton

Electrical Engineering Division,
Engineering Department,
University of Cambridge,
9, JJ Thomson Avenue,

Tel: +44 (0)7729 980173 - (No signal in the lab!)
Tel: +44 (0)1223 748328 - (Shared lab phone, ask for me)

Attachment: signature.asc
Description: This is a digitally signed message part

geda-user mailing list