Re: gEDA-user: gerbv and eagle - crashed - retested again

[Stefan Petersen <spe@stacken.kth.se>]

Hello Alvin!

On Sun, 28 Sep 2003, Alvin Oga wrote:

> i've regenerated and confirmed that gerbv-0.13 segfaults on "gerberauto" files
> output from eagle
> 	# gerbv .../LedAssy-2.1/crashbot.gbr
> 	Segmentation fault
>
> gerbv-0.14 shows the following error message which is probably right
> 	# gerbv-0.14  .../LedAssy-2.1/crashbot.gbr
>
> |	/tmp/gerb/LedAssy-2.1/crashbot.gbr: Parse error:
> |	* Missing format
> |	* Missing apertures/drill sizes
> |
> |	You probably tried to read an RS-274D file, which gerbv doesn't support
>
> good .. looks like the segfult is fixed in gerbv-0.14 for "gerberauto" outputs
> from eagle  ...

I get very worried when it segfaults, but that seems to be that old
problem. Great to hear that it seems fixed and sorry for the problems
caused by 0.13!


> 	but, it still errors out with links to the real drill files
> 	( ln -s led-assy.dri crashbot.dri
> 	( ln -s led-assy.drl crashbot.drl
> 	( ln -s led-assy.dri crashbot.dri

So the drillfiles causes segfault? Or are they just "missdrawn"? You have
used the scripts that Holger pointed out, since gerbv doesn't like Eagle
default drill files?

Regards,
/spe