Re: gEDA-user: GND and supply for PIC12C5xx

[Ales Hvezda <ahvezda@seul.org>]

[ Ales here, I'm reposting this since majordomo didn't recognize the
  e-mail as being subscribed to the geda-dev/user mailinglist.  
  Please note that I am not the original author. ]

-- Cut here --
From: Marc Reibel <marc.reibel@reibel-web.de>

On Sun, 1 Jun 2003 uwe.hartl@gmx.net wrote:

> Hi,
>
> first of all, thank you for building an developement environment under GPL!
>
> Probably I have the most stupid question you ever heard. I want to use the
> PIC12C5xx and there are only the 6 signal pins in the symbol included.
> 1. How do I connect the Power and GND to the chip?

There are GND and VDD-nets used in the symbol.
Just make sure you connect nets named "GND" and "VDD" to
some powersource in your schematics and gnetlist will do
the trick.

> 2. Is there an automated check if all power and GND connected (ERC) to make
> sure I did not forget half of the supplys?

power- and vdd-nets will be connected automatically, so no
need for manual ERC.

> Thanks
>
> Uwe
HTH,
Marc
---- 
Dipl.-Wirtsch.-Ing. Marc Reibel
<marc.reibel@reibel-web.de> PGP-ID: 21AC7C78