Re: gEDA-user: solder/component --> top/bottom ?

[Kai-Martin Knaak <kmk@xxxxxxxxxxxxxxx>]

Kai-Martin Knaak wrote:

> b) The names of the copper groups in
> File -> Preferences -> Groups
> 
> c) The help text in
> File -> Preferences -> Info

patch atttached for the preference dialog
 
 ---<)kaimartin(>---
-- 
Kai-Martin Knaak, Email: kmk@xxxxxxxxxxxxxxx
http://pool.sks-keyservers.net:11371/pks/lookup?search=0x6C0B9F53
Still unhappy with moderation of geda-user. 
Why? Because it is completely intransparent.

From 1136147170b47926ed00f8f2e24f3f2ed00f580c Mon Sep 17 00:00:00 2001
From: Kai-Martin Knaak <kmk@xxxxxxxxxxxx>
Date: Mon, 19 Sep 2011 04:15:03 +0200
Subject: [PATCH] top-bottom-in-preference-dialog-of-GTK-HID

This patch replaces "component" and "solder" in the preference dialog of
GTK HID with "top" and "bottom". Incindences were in the layer group
tab and in the text of the info tab.
---
 src/hid/gtk/gui-config.c |   32 ++++++++++++++++----------------
 1 files changed, 16 insertions(+), 16 deletions(-)

diff --git a/src/hid/gtk/gui-config.c b/src/hid/gtk/gui-config.c
index dba0635..b46b3fb 100644
--- a/src/hid/gtk/gui-config.c
+++ b/src/hid/gtk/gui-config.c
@@ -1243,7 +1243,7 @@ static gboolean groups_modified, groups_holdoff, layers_applying;
 static gchar *layer_info_text[] = {
   N_("<h>Layer Names\n"),
   N_("You may enter layer names for the layers drawn on the screen.\n"
-     "The special 'component side' and 'solder side' are layers which\n"
+     "The special 'top side' and 'bottom side' are layers which\n"
      "will be printed out, so they must have in their group at least one\n"
      "of the other layers that are drawn on the screen.\n"),
   "\n",
@@ -1257,7 +1257,7 @@ static gchar *layer_info_text[] = {
   "\n",
   N_("For example, for a 4 layer board a useful layer group arrangement\n"
      "can be to have 3 screen displayed layers grouped into the same group\n"
-     "as the 'component side' and 'solder side' printout layers.  Then\n"
+     "as the 'top side' and 'bottom side' printout layers.  Then\n"
      "groups such as signals, ground, and supply traces can be color\n"
      "coded on the screen while printing as a single layer.  For this\n"
      "you would select buttons and enter names on the Setup page to\n"
@@ -1265,23 +1265,23 @@ static gchar *layer_info_text[] = {
   "\n",
   N_("<b>Group 1:"),
   "\n\t",
-  N_("solder"),
+  N_("top"),
   "\n\t",
-  N_("GND-solder"),
+  N_("GND-top"),
   "\n\t",
-  N_("Vcc-solder"),
+  N_("Vcc-top"),
   "\n\t",
-  N_("solder side"),
+  N_("top side"),
   "\n",
   N_("<b>Group 2:"),
   "\n\t",
-  N_("component"),
+  N_("bottom"),
   "\n\t",
-  N_("GND-component"),
+  N_("GND-bottom"),
   "\n\t",
-  N_("Vcc-component"),
+  N_("Vcc-bottom"),
   "\n\t",
-  N_("component side"),
+  N_("bottom side"),
   "\n",
   N_("<b>Group 3:"),
   "\n\t",
@@ -1396,21 +1396,21 @@ config_layers_apply (void)
 	}
 
       /* do some cross-checking
-         |  solder-side and component-side must be in different groups
-         |  solder-side and component-side must not be the only one in the group
+         |  top-side and bottom-side must be in different groups
+         |  top-side and bottom-side must not be the only one in the group
        */
       if (layer_groups.Number[soldergroup] <= 1
 	  || layer_groups.Number[componentgroup] <= 1)
 	{
 	  Message (_
-		   ("Both 'solder side' or 'component side' layers must have at least\n"
+		   ("Both, 'top side' and 'bottom side' layer must have at least\n"
 		    "\tone other layer in their group.\n"));
 	  return;
 	}
       else if (soldergroup == componentgroup)
 	{
 	  Message (_
-		   ("The 'solder side' and 'component side' layers are not allowed\n"
+		   ("The 'top side' and 'bottom side' layers are not allowed\n"
 		    "\tto be in the same layer group #\n"));
 	  return;
 	}
@@ -1521,9 +1521,9 @@ ghid_config_groups_changed(void)
   for (layer = 0; layer < max_copper_layer + 2; ++layer)
     {
       if (layer == component_silk_layer)
-	name = _("component side");
+	name = _("top side");
       else if (layer == solder_silk_layer)
-	name = _("solder side");
+	name = _("bottom side");
       else
 	name = (gchar *) UNKNOWN (PCB->Data->Layer[layer].Name);
 
-- 
1.7.5.4



_______________________________________________
geda-user mailing list
geda-user@xxxxxxxxxxxxxx
http://www.seul.org/cgi-bin/mailman/listinfo/geda-user