[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: gEDA-user: Insufficient clearance of pad inside polygon

To: geda-user@xxxxxxxx
Subject: Re: gEDA-user: Insufficient clearance of pad inside polygon
From: DJ Delorie <dj@xxxxxxxxxxx>
Date: Thu, 5 Jan 2006 01:12:29 -0500
Delivered-to: archiver@seul.org
Delivered-to: geda-user-outgoing@seul.org
Delivered-to: geda-user@seul.org
Delivery-date: Thu, 05 Jan 2006 01:12:39 -0500
In-reply-to: <43BCB29C.7060103@alchemyresearch.com> (message from Steve Meier on Wed, 04 Jan 2006 21:46:04 -0800)
References: <20060101155204.GA19131@kestrel> <200601021920.k02JKDMw005389@envy.delorie.com> <20060103143046.GA19399@kestrel> <200601031447.k03Elgqi008025@envy.delorie.com> <20060103145601.GA15150@kestrel> <200601031501.k03F1IJC009222@envy.delorie.com> <20060104145532.GA20324@kestrel> <43BBEE59.2050302@alchemyresearch.com> <200601041625.k04GPRlF013268@envy.delorie.com> <43BCB150.4020004@alchemyresearch.com> <43BCB29C.7060103@alchemyresearch.com>
Reply-to: geda-user@xxxxxxxx
Sender: owner-geda-user@xxxxxxxx

> Wouldn't you like to know the moment you short two nets rather then at
> some later point that two nets are shorted?

In theory, pcb already has that kind of thing.  It won't let you
connect two traces that are from different netlists if you check that
option.

However, you are allowed to change the DRC parameters after you design
the board.  Say, if you change fab houses to save costs.

References:
- gEDA-user: Insufficient clearance of pad inside polygon
  - From: Karel Kulhavy
- Re: gEDA-user: Insufficient clearance of pad inside polygon
  - From: DJ Delorie
- Re: gEDA-user: Insufficient clearance of pad inside polygon
  - From: Karel Kulhavy
- Re: gEDA-user: Insufficient clearance of pad inside polygon
  - From: DJ Delorie
- Re: gEDA-user: Insufficient clearance of pad inside polygon
  - From: Karel Kulhavy
- Re: gEDA-user: Insufficient clearance of pad inside polygon
  - From: DJ Delorie
- Re: gEDA-user: Insufficient clearance of pad inside polygon
  - From: Karel Kulhavy
- Re: gEDA-user: Insufficient clearance of pad inside polygon
  - From: Steve Meier
- Re: gEDA-user: Insufficient clearance of pad inside polygon
  - From: DJ Delorie
- Re: gEDA-user: Insufficient clearance of pad inside polygon
  - From: Steve Meier
- Re: gEDA-user: Insufficient clearance of pad inside polygon
  - From: Steve Meier

Prev by Author: Re: gEDA-user: Insufficient clearance of pad inside polygon
Next by Author: Re: gEDA-user: Insufficient clearance of pad inside polygon
Previous by thread: Re: gEDA-user: Insufficient clearance of pad inside polygon
Next by thread: Re: gEDA-user: Insufficient clearance of pad inside polygon
Index(es):
- Author
- Thread