Mail Thread Index

• Author Index

• gEDA-user: New Gnucap development snapshot, Al Davis
• Re: gEDA-user: wxPCB Goals, John Sheahan
  • Re: gEDA-user: wxPCB Goals, Dan McMahill
    • Re: gEDA-user: wxPCB Goals, Dave McGuire
    • back annotation, was Re: gEDA-user: wxPCB Goals, Al Davis
  • <Possible follow-ups>
  • Re: gEDA-user: wxPCB Goals, Bob Paddock
  • Re: gEDA-user: wxPCB Goals, Al Davis
    • Re: gEDA-user: wxPCB Goals, Bob Paddock
      • AN interseting delema Re: gEDA-user: wxPCB Goals, Steve Meier
      • Re: AN interseting delema Re: gEDA-user: wxPCB Goals, Dave McGuire
      • Re: AN interseting delema Re: gEDA-user: wxPCB Goals, Steve Meier
      • Re: AN interseting delema Re: gEDA-user: wxPCB Goals, Dave McGuire
      • Re: AN interseting delema Re: gEDA-user: wxPCB Goals, Steve Meier
      • Re: AN interseting delema Re: gEDA-user: wxPCB Goals, Dave McGuire
      • Re: AN interseting delema Re: gEDA-user: wxPCB Goals, Steve Meier
      • Re: AN interseting delema Re: gEDA-user: wxPCB Goals, Steve Meier
      • Re: AN interseting delema Re: gEDA-user: wxPCB Goals, Steve Meier
      • Re: AN interseting delema Re: gEDA-user: wxPCB Goals, Dave McGuire
      • Re: AN interseting delema Re: gEDA-user: wxPCB Goals, DJ Delorie
      • Re: AN interseting delema Re: gEDA-user: wxPCB Goals, Steve Meier
      • Re: AN interseting delema Re: gEDA-user: wxPCB Goals, Dave McGuire
      • Re: AN interseting delema Re: gEDA-user: wxPCB Goals, Dan McMahill
      • Re: AN interseting delema Re: gEDA-user: wxPCB Goals, DJ Delorie
    • Re: gEDA-user: wxPCB Goals, Charles Lepple
      • Re: gEDA-user: wxPCB Goals, DJ Delorie
      • Re: gEDA-user: wxPCB Goals, Bob Paddock
      • Re: gEDA-user: wxPCB Goals, Dave McGuire
• Re: gEDA-user: RoHS compliant fab & assy drawing notes, Karel Kulhavy
• RE: gEDA-user: wxPCB Goals[MESSAGE NOT SCANNED], Robert Thorpe
• gEDA-user: CC2420, James Cotton
• gEDA-user: gEDA in the news, Stuart Brorson
• Re: gEDA-user: gEDA on a 512MB USB flash disk, John Griessen
• Re: gEDA-user: vhdl simulator in gEDA, Günter Dannoritzer
• gEDA-user: import gerber, James Cotton
  • Re: gEDA-user: import gerber, kmk
    • Re: gEDA-user: import gerber, DJ Delorie
      • gEDA-user: xaw vs. gtk future?, Phil Taylor
      • Re: gEDA-user: xaw vs. gtk future?, DJ Delorie
      • Re: gEDA-user: xaw vs. gtk future?, Dave McGuire
      • Re: gEDA-user: xaw vs. gtk future?, DJ Delorie
      • Re: gEDA-user: xaw vs. gtk future?, Dave McGuire
      • Re: gEDA-user: xaw vs. gtk future?, DJ Delorie
      • Re: gEDA-user: xaw vs. gtk future?, Dave McGuire
      • Re: gEDA-user: xaw vs. gtk future?, Bob Paddock
      • Re: gEDA-user: xaw vs. gtk future?, Dan McMahill
      • Re: gEDA-user: xaw vs. gtk future?, Stuart Brorson
      • Re: gEDA-user: xaw vs. gtk future?, DJ Delorie
      • Re: gEDA-user: xaw vs. gtk future?, don
      • Re: gEDA-user: xaw vs. gtk future?, DJ Delorie
      • Re: gEDA-user: xaw vs. gtk future?, Xtian Xultz
      • Re: gEDA-user: xaw vs. gtk future?, don
      • Re: gEDA-user: xaw vs. gtk future?, DJ Delorie
      • Re: gEDA-user: xaw vs. gtk future?, Xtian Xultz
      • Re: gEDA-user: xaw vs. gtk future?, Steve Meier
      • Re: gEDA-user: xaw vs. gtk future?, Dave McGuire
      • Re: gEDA-user: xaw vs. gtk future?, Stuart Brorson
      • Re: gEDA-user: xaw vs. gtk future?, DJ Delorie
      • Re: gEDA-user: import gerber, James Cotton
      • Re: gEDA-user: import gerber, DJ Delorie
• gEDA-user: newbie questions, Ron Crummett
  • Re: gEDA-user: newbie questions, Dave McGuire
    • Re: gEDA-user: newbie questions, Ron Crummett
      • Re: gEDA-user: newbie questions, Mark Rages
  • Re: gEDA-user: newbie questions, Stuart Brorson
    • Re: gEDA-user: newbie questions, Al Davis
  • Re: gEDA-user: newbie questions, Eric Daine
• gEDA-user: pad description, Karel Kulhavy
  • Re: gEDA-user: pad description, don
    • Re: gEDA-user: pad description, Steve Meier
      • Re: gEDA-user: pad description, Stuart Brorson
      • Re: gEDA-user: pad description, Steve Meier
• gEDA-user: PCB pad dimensions, Karel Kulhavy
  • Re: gEDA-user: PCB pad dimensions, Dan McMahill
    • Re: gEDA-user: PCB pad dimensions, Bert Douglas
      • Re: gEDA-user: PCB pad dimensions, DJ Delorie
      • Re: gEDA-user: PCB pad dimensions, Dan McMahill
• gEDA-user: -0 syntax error, Karel Kulhavy
  • Re: gEDA-user: -0 syntax error, Bob Paddock
  • Re: gEDA-user: -0 syntax error, DJ Delorie
• gEDA-user: New testing version of gEDA Suite CD available, Stuart Brorson
  • Re: gEDA-user: New testing version of gEDA Suite CD available, David Hart
    • Re: gEDA-user: New testing version of gEDA Suite CD available, Stuart Brorson
      • Re: gEDA-user: New testing version of gEDA Suite CD available, David Hart
      • Re: gEDA-user: New testing version of gEDA Suite CD available, Charles Lepple
      • Re: gEDA-user: New testing version of gEDA Suite CD available, David Hart
      • Was: gEDA-user: New testing version of gEDA Suite CD available, Now: Qemu, Mike Hansen
      • Re: gEDA-user: New testing version of gEDA Suite CD available, Stuart Brorson
  • Re: gEDA-user: New testing version of gEDA Suite CD available, Leva
  • <Possible follow-ups>
  • Re: gEDA-user: New testing version of gEDA Suite CD available, David Hart
• gEDA-user: Project File(s) for Ngspice under MS Windows, Rui Tavares
• gEDA-user: Spartan3 FT256 layout in PCB, again, Larry Doolittle
• gEDA-user: latest PCB w/gsch2pcb deletes parts?, Matt Ettus
  • Re: gEDA-user: latest PCB w/gsch2pcb deletes parts?, Dan McMahill
    • Re: gEDA-user: latest PCB w/gsch2pcb deletes parts?, Stuart Brorson
      • Re: gEDA-user: latest PCB w/gsch2pcb deletes parts?, Matt Ettus
      • Re: gEDA-user: latest PCB w/gsch2pcb deletes parts?, Steve Meier
      • Re: gEDA-user: latest PCB w/gsch2pcb deletes parts?, Dan McMahill
      • Re: gEDA-user: latest PCB w/gsch2pcb deletes parts?, Matt Ettus
      • Re: gEDA-user: latest PCB w/gsch2pcb deletes parts?, Dan McMahill
• gEDA-user: unsubscribe geda-user, Zoran Spasojevic
• gEDA-user: bug in gtk pcb, Karel Kulhavy
• gEDA-user: gEDA mounting hole for screws, toaster2
  • Re: gEDA-user: gEDA mounting hole for screws, Stuart Brorson
    • Re: gEDA-user: gEDA mounting hole for screws, toaster2
      • Re: gEDA-user: gEDA mounting hole for screws, John Luciani
      • Re: gEDA-user: gEDA mounting hole for screws, toaster2
      • Re: gEDA-user: gEDA mounting hole for screws, Phil Taylor
      • Re: gEDA-user: gEDA mounting hole for screws, Stuart Brorson
      • Re: gEDA-user: gEDA mounting hole for screws, John Luciani
      • Re: gEDA-user: gEDA mounting hole for screws, Stuart Brorson
      • Re: gEDA-user: gEDA mounting hole for screws, DJ Delorie
      • Re: gEDA-user: gEDA mounting hole for screws, Dan McMahill
      • gEDA-user: Re: gEDA mounting hole for screws, how to rip only selected portion of routed tracks, Frank Eory
      • Re: gEDA-user: gEDA mounting hole for screws, kmk
      • Re: gEDA-user: gEDA mounting hole for screws, joeft
    • Re: gEDA-user: gEDA mounting hole for screws, Xtian Xultz
  • Re: gEDA-user: gEDA mounting hole for screws, Xtian Xultz
• gEDA-user: Rip up selected rats question, layer color, toaster2
  • Re: gEDA-user: Rip up selected rats question, layer color, DJ Delorie
  • Re: gEDA-user: Rip up selected rats question, layer color, John Luciani
    • Re: gEDA-user: Rip up selected rats question, layer color, Dan McMahill
      • Re: gEDA-user: Rip up selected rats question, layer color, DJ Delorie
      • Re: gEDA-user: Rip up selected rats question, layer color, harry eaton
      • Re: gEDA-user: Rip up selected rats question, layer color, DJ Delorie
  • Re: gEDA-user: Rip up selected rats question, layer color, harry eaton
• gEDA-user: New User Questions., Dion
  • Re: gEDA-user: New User Questions., Ales Hvezda
    • Re: gEDA-user: New User Questions., Dion
      • Re: gEDA-user: New User Questions., Stuart Brorson
    • Re: gEDA-user: New User Questions., Carlos Nieves Ónega
      • Re: gEDA-user: New User Questions., Dion
• gEDA-user: Some spice-related questions, Thinus Viljoen
  • Re: gEDA-user: Some spice-related questions, Stuart Brorson
    • Re: gEDA-user: Some spice-related questions, Dan McMahill
• gEDA-user: gwave relocation error, Thinus Viljoen
• gEDA-user: Anticapacitor?, Karel Kulhavy
  • Re: gEDA-user: Anticapacitor?, Dan McMahill
  • Re: gEDA-user: Anticapacitor?, Bob Paddock
    • Re: gEDA-user: Anticapacitor -- step back a little from the problem, Bert Douglas
    • gEDA-user: gschem: no connects and active low signals, joeft
      • Re: gEDA-user: gschem: no connects and active low signals, Stuart Brorson
• gEDA-user: updating footprints in an existing layout, Dan McMahill
• gEDA-user: Olimex and PCB?, David Carr
• gEDA-user: How to automatically present simulation results on a webpage, Karel Kulhavy
• gEDA-user: footprints needed, Dominique Michel
  • Re: gEDA-user: footprints needed, Phil Taylor
    • Re: gEDA-user: footprints needed, Dominique Michel
      • Re: gEDA-user: footprints needed, John Luciani
      • Re: gEDA-user: footprints needed, Dominique Michel
      • Re: gEDA-user: footprints needed, John Luciani
• gEDA-user: Ronja: User Controlled Technology in Education, Karel Kulhavy
• gEDA-user: gEDA updates at luciani.org, John Luciani
• gEDA-user: PCB Move Component to other side, Matt Ettus
  • Re: gEDA-user: PCB Move Component to other side, DJ Delorie
• gEDA-user: geda/pcb IRC, Phil Taylor
  • Re: gEDA-user: geda/pcb IRC, Ales Hvezda
• gEDA-user:, James Cotton
• gEDA-user: RE: gsch2pcb hangs with long footprint names (was: nothing), James Cotton
  • Re: gEDA-user: RE: gsch2pcb hangs with long footprint names (was: nothing), Leva
• gEDA-user: libgeda24 vs. 20 dependency, Phil Taylor
  • Re: gEDA-user: libgeda24 vs. 20 dependency, Phil Taylor
    • Re: gEDA-user: libgeda24 vs. 20 dependency, Stuart Brorson
      • Re: gEDA-user: libgeda24 vs. 20 dependency, Stuart Brorson
      • Re: gEDA-user: libgeda24 vs. 20 dependency, Phil Taylor
• gEDA-user: automation of gsymcheck ??, Phil Taylor
  • Re: gEDA-user: automation of gsymcheck ??, Ales Hvezda
• Re: gEDA-user: gschem: replace moves attributes, Carlos Nieves Ónega
• Re: gEDA-user: Bug in gschem: slot changes are not displayed, Carlos Nieves Ónega
• gEDA-user: Reviews, David Hart
  • Re: gEDA-user: Reviews, John Doty
    • gEDA-user: OT: Santa Monica, Karel Kulhavy
• gEDA-user: drc2 with slotting, James Cotton
  • Re: gEDA-user: drc2 with slotting, Carlos Nieves Ónega
    • Re: gEDA-user: drc2 with slotting, James Cotton
      • Re: gEDA-user: drc2 with slotting, Carlos Nieves Ónega
      • Re: gEDA-user: drc2 with slotting, Werner Hoch
      • Re: gEDA-user: drc2 with slotting, James Cotton
      • Re: gEDA-user: drc2 with slotting, Carlos Nieves Ónega
• gEDA-user: gspiceUI problems, Ron Crummett
  • Re: gEDA-user: gspiceUI problems, Stuart Brorson
• gEDA-user: gsch2pcb sources, Phil Taylor
  • Re: gEDA-user: gsch2pcb sources, Stuart Brorson
• gEDA-user: Verilog templates for non-Win users, hoyuka hoya
• gEDA-user: spice-sdb connection order confusion, John Doty
  • Re: gEDA-user: spice-sdb connection order confusion, DJ Delorie
    • Re: gEDA-user: spice-sdb connection order confusion, Stuart Brorson
      • Re: gEDA-user: spice-sdb connection order confusion, DJ Delorie
  • Re: gEDA-user: spice-sdb connection order confusion, Stuart Brorson
    • Re: gEDA-user: spice-sdb connection order confusion, Al Davis
      • Re: gEDA-user: spice-sdb connection order confusion, John Doty
      • Re: gEDA-user: spice-sdb connection order confusion, Stuart Brorson
  • gEDA-user: Re: spice-sdb connection order confusion, Stuart Brorson
    • Re: gEDA-user: Re: spice-sdb connection order confusion, John Doty
• RE: gEDA-user: spice-sdb connection order confusion[Scanned], Robert Thorpe
• gEDA-user: eclipse and icarus, Hal2000
• gEDA-user: Unconnected pins with spice-sdb, John Doty
• gEDA-user: re rohs fab notes, Hal2000
• gEDA-user: tclspice, Marc
  • Re: gEDA-user: tclspice, John Doty
  • <Possible follow-ups>
  • gEDA-user: tclspice, Marc
    • Re: gEDA-user: tclspice, Stuart Brorson
  • gEDA-user: tclspice, Marc