Mail Thread Index
- gEDA-user: Suse-10.1,
Wolfgang Buesser
- gEDA-user: "Disabling" symbols and nets?,
Tomasz Nowak
- Re: gEDA-user: conversion tools for geda,
Peter Clifton
- gEDA-user: Design changs required to mill PCBs?,
Bob Paddock
- Re: gEDA-user: Design changs required to mill PCBs?,
Dan McMahill
- Re: gEDA-user: Design changs required to mill PCBs?,
Bob Paddock
- Re: gEDA-user: Design changs required to mill PCBs?,
Dave McGuire
- Re: gEDA-user: Design changs required to mill PCBs?,
Igor2
- Re: gEDA-user: Design changs required to mill PCBs?,
Robert Fitzsimons
- Re: gEDA-user: Design changs required to mill PCBs?,
Dave McGuire
- Re: gEDA-user: Design changs required to mill PCBs?,
Dave N6NZ
- Re: gEDA-user: Design changs required to mill PCBs?,
DJ Delorie
- Re: gEDA-user: Design changs required to mill PCBs?,
Dave N6NZ
- Re: gEDA-user: Design changs required to mill PCBs?,
Dan McMahill
- Re: gEDA-user: Design changs required to mill PCBs?,
Igor2
- Re: gEDA-user: Design changs required to mill PCBs?,
Dave N6NZ
- Re: gEDA-user: Design changs required to mill PCBs?,
Dave McGuire
- Re: gEDA-user: choosing power MOSFET's,
Greg Cunningham
- gEDA-user: Yesterday's code sprint irc log posted,
Ales Hvezda
- gEDA-user: [pcb] settings file,
DJ Delorie
- gEDA-user: PCB: Rotate in steps of 30 and 45 degree?,
David Epping
- gEDA-user: Newbie PCB DRC questions,
Vaughn Treude
- gEDA-user: Re: Design changs required to mill PCBs?,
Matthew Sager
- gEDA-user: home-made 4 layer board idea,
DJ Delorie
- gEDA-user: Icarus Verilog Release 0.8.3,
Stephen Williams
- gEDA-user: Re: gEDA-dev: Filechooser and component selector code,
John Griessen
- gEDA-user: simulating microcontroller,
Ejaz Ahmed
- gEDA-user: Problems with PCB grid,
Harold D. Skank
- gEDA-user: Better way to set sizes (line width, via diameter, drill diameter, etc) in pcb?,
Marc Mignard
- Re: gEDA-user: Better way to set sizes (line width, via diameter, drill diameter, etc) in pcb?,
John Griessen
- Re: gEDA-user: Better way to set sizes (line width, via diameter, drill diameter, etc) in pcb?,
Stuart Brorson
- Re: gEDA-user: Better way to set sizes (line width, via diameter, drill diameter, etc) in pcb?,
DJ Delorie
- gEDA-user: [pcb-gpmi] scriptable exporter,
Igor2
- Re: gEDA-user: question about pcb libraries lesstif HID,
John Griessen
- gEDA-user: Board fabrication -- outline,
Stefan Salewski
- gEDA-user: New polygon handling version now in head of CVS version,
bumpelo
- Re: gEDA-user: Re: Board fabrication -- outline,
bumpelo
- gEDA-user: bf1 vs. pcb,
Levente
- gEDA-user: IPC 7351 name for wire terminal?,
phil@xxxxxxxxxxxxx
- gEDA-user: Segfault with ubuntu packages,
Matt Ettus
- gEDA-user: PCB lesstif pcb-menu.res ideas,
John Griessen
- gEDA-user: the challenge boards are here!,
DJ Delorie
- gEDA-user: TO-263 footprint,
Jeff VR
- gEDA-user: Polygon clear line question,
hwb
- gEDA-user: more on clipping,
Levente
- gEDA-user: Hurray for pcb-clipping,
David Carr
- gEDA-user: PCB: Save called Open,
Karel Kulhavy
- gEDA-user: PCB: See 'Problems' in the manual,
Karel Kulhavy
- gEDA-user: Automatic repositioning to attributes,
Antonio Augusto Todo Bom Neto
- gEDA-user: TQFP Footprints,
Lares Moreau
- gEDA-user: Got some gEDA symbols,
Michael Sokolov
- gEDA-user: one net, two pins,
Dave N6NZ
- gEDA-user: QFN16_3_EP footprint,
Matthias Wenzel
- gEDA-user: Some gschem/ngspice problems,
John Coppens
- gEDA-user: Dangerous gsymupdate behavior,
Matt Ettus
- gEDA-user: Schottky diode?,
John Coppens
- Re: gEDA-user: Schottky diode?,
Stuart Brorson
- Re: gEDA-user: Schottky diode?,
al davis
- Re: gEDA-user: Schottky diode?,
Karel Kulhavy
- Re: gEDA-user: Schottky diode?,
John Coppens
- Re: gEDA-user: Schottky diode?,
John Coppens
- Re: gEDA-user: Schottky diode?,
al davis
- Re: gEDA-user: Schottky diode?,
John Coppens
- Re: gEDA-user: Schottky diode?,
Dan McMahill
- Re: gEDA-user: Schottky diode?,
John Coppens
- Re: gEDA-user: Schottky diode?,
Dan McMahill
- Re: gEDA-user: Schottky diode?,
John Coppens
- Re: gEDA-user: Schottky diode?,
Dan McMahill
- Re: gEDA-user: Schottky diode?,
Dave McGuire
- Re: gEDA-user: Schottky diode?,
John Luciani
- Re: gEDA-user: Schottky diode?,
John Coppens
- Re: gEDA-user: Schottky diode?,
al davis
- Re: gEDA-user: Schottky diode?,
John Griessen
- Re: gEDA-user: Schottky diode?,
Dan McMahill
- Re: gEDA-user: Schottky diode?,
Dave McGuire
- Re: gEDA-user: Schottky diode?,
John Coppens
- Re: gEDA-user: Schottky diode?,
al davis
- Re: gEDA-user: Schottky diode?,
Dan McMahill
- gEDA-user: Buses in gEDA/gaf,
Michael Sokolov
- gEDA-user: PCB: turn off refdes in silk for selected components?,
Dave N6NZ
- gEDA-user: Re: gEDA-dev: gsch2pcb is not finding local footprint dirs,
John Griessen
- gEDA-user: Icarus Verilog documentation Wiki,
Stephen Williams
- gEDA-user: smd challenge board status - last step!,
DJ Delorie
- gEDA-user: PCB polygon & rectangle practicalities,
Dave N6NZ
- gEDA-user: Trouble with CONN_USB,
Olof Tångrot
- gEDA-user: How To Unsubscribe?,
User Tomdean
- gEDA-user: bending design rules for TSSOP20 -- need advice,
Dave N6NZ
- gEDA-user: Time or order your SMD Challenge Board!,
DJ Delorie
- gEDA-user: gEDA/gaf 20061020 source tarballs released,
Ales Hvezda
- gEDA-user: Combining 2 schematics in a single pcb project,
Carl Franks
- gEDA-user: fried my LDO :-(,
DJ Delorie
- gEDA-user: Test,
Stuart Brorson
- gEDA-user: gschem symbol search order,
Peter Baxendale
- gEDA-user: gsch2pcb can't find pcb installation directory,
devrin talen
- gEDA-user: smd challenge board status,
DJ Delorie
- gEDA-user: m3a-4m board assembled,
DJ Delorie
- gEDA-user: gnucap include command,
Karel Kulhavy
- gEDA-user: gnucap: how to use .MODEL?,
Karel Kulhavy
- gEDA-user: PCB footprints,
John Griessen
- gEDA-user: net attribute placement,
Kai-Martin Knaak
- gEDA-user: segfault on edit of slot attribute,
Kai-Martin Knaak
- gEDA-user: Orcad binary file format,
Patrick Doyle
- gEDA-user: pin numbers don't update on slot edit,
Kai-Martin Knaak
- gEDA-user: My board is back -- groundplane (polygon) is missing,
Stefan Salewski
- gEDA-user: PCB and new thermals syntax error,
Christian Treldal
- gEDA-user: Current source rail blocking,
Karel Kulhavy
- gEDA-user: Footprints, pins with 0x09 type,
Stefan Salewski
- gEDA-user: solder bridges in gschem and pcb,
Stefan Salewski
- gEDA-user: BC547 vs. 2N3904,
Karel Kulhavy
- gEDA-user: Haunted BF982,
Karel Kulhavy
- gEDA-user: pcb refdes name restrictions?,
Peter Baxendale
- Re: gEDA-user: pcb refdes name restrictions?,
Peter Clifton
- Re: gEDA-user: pcb refdes name restrictions?,
John Luciani
- Re: gEDA-user: pcb refdes name restrictions?,
Peter Baxendale
- Re: gEDA-user: pcb refdes name restrictions?,
Stuart Brorson
- Re: gEDA-user: pcb refdes name restrictions?,
Peter Baxendale
- Re: gEDA-user: pcb refdes name restrictions?,
Peter Clifton
- Re: gEDA-user: pcb refdes name restrictions?,
Peter Baxendale
- Re: gEDA-user: pcb refdes name restrictions?,
Peter Clifton
- Re: gEDA-user: pcb refdes name restrictions?,
John Luciani
- gEDA-user: experiences using geda with students,
John Griessen
- gEDA-user: Forwarding some gEDA teaching materials I've discovered:,
Peter Clifton
- Re: gEDA-user: Forwarding some gEDA teaching materials I've discovered:,
Peter Clifton
- Re: gEDA-user: pcb refdes name restrictions?,
Dan McMahill
- Re: gEDA-user: pcb refdes name restrictions?,
Harry Eaton
- Re: gEDA-user: pcb refdes name restrictions?,
Dan McMahill
- Re: gEDA-user: pcb refdes name restrictions?,
Dan McMahill
- gEDA-user: gPCB Polygon Best Practices,
Jeff VR
- gEDA-user: Pointer to 3d CAD?,
Dave N6NZ
- Re: gEDA-user: Re: Pointer to 3d CAD?,
Michael Sokolov
- gEDA-user: gwave download mislinked,
Karel Kulhavy
- gEDA-user: gwave installation failure on OpenBSD,
Karel Kulhavy
- gEDA-user: Which version of guile-gtk is later?,
Karel Kulhavy
Mail converted by MHonArc 2.6.10