Mail Thread Index

• Author Index

• Re: gEDA-user: gschem: error while loading shared libraries, John Rigg
• Re: gEDA-user: gsch2pcb to pcb error, Mike Bushroe
  • Re: gEDA-user: gsch2pcb to pcb error, Stefan Salewski
  • Re: gEDA-user: gsch2pcb to pcb error, kai-martin knaak
  • <Possible follow-ups>
  • Re: gEDA-user: gsch2pcb to pcb error, Kai-Martin Knaak
    • Re: gEDA-user: gsch2pcb to pcb error, DJ Delorie
      • Re: gEDA-user: gsch2pcb to pcb error, kai-martin knaak
      • Re: gEDA-user: gsch2pcb to pcb error, Armin Faltl
    • Re: gEDA-user: gsch2pcb to pcb error, John Doty
  • Re: gEDA-user: gsch2pcb to pcb error, Mike Bushroe
• gEDA-user: BUG: gschem Segmentation fault, myken
  • Re: gEDA-user: BUG: gschem Segmentation fault, Patrick Bernaud
    • Re: gEDA-user: BUG: gschem Segmentation fault, myken
• gEDA-user: Non-linear spice models for power sources operating near stall, Mike Crowe
  • Re: gEDA-user: Non-linear spice models for power sources operating near stall, Matthew Wilkins
    • Re: gEDA-user: Non-linear spice models for power sources operating near stall, Mike Crowe
      • Re: gEDA-user: Non-linear spice models for power sources operating near stall, Armin Faltl
      • Re: gEDA-user: Non-linear spice models for power sources operating near stall, Mike Crowe
• Re: gEDA-user: On Deprecation of GtkTearoffMenuItem, Kai-Martin Knaak
• gEDA-user: gnetlist partslists backends, Richard Barlow
  • Re: gEDA-user: gnetlist partslists backends, Robert Spanton
• Re: gEDA-user: Next problem, PCB looses rats, Peter Clifton
  • <Possible follow-ups>
  • Re: gEDA-user: Next problem, PCB looses rats, Armin Faltl
    • Re: gEDA-user: Next problem, PCB looses rats, kai-martin knaak
      • Re: gEDA-user: Next problem, PCB looses rats, DJ Delorie
      • Re: gEDA-user: Next problem, PCB looses rats, kai-martin knaak
      • Re: gEDA-user: Next problem, PCB looses rats, DJ Delorie
      • Re: gEDA-user: Next problem, PCB looses rats, Peter Clifton
      • Re: gEDA-user: Next problem, PCB looses rats, Kai-Martin Knaak
      • Re: gEDA-user: Use of Alt+Mouse1 (was: Next problem, PCB looses rats), Jonatan Åkerlind
      • Re: gEDA-user: Use of Alt+Mouse1 (was: Next problem, PCB looses rats), kai-martin knaak
      • Re: gEDA-user: Use of Alt+Mouse1 (was: Next problem, PCB looses rats), DJ Delorie
      • Re: gEDA-user: Use of Alt+Mouse1 (was: Next problem, PCB looses rats), timecop
      • Re: gEDA-user: Use of Alt+Mouse1 (was: Next problem, PCB looses rats), DJ Delorie
      • Re: gEDA-user: Use of Alt+Mouse1 (was: Next problem, PCB looses rats), DJ Delorie
      • Re: gEDA-user: Use of Alt+Mouse1 (was: Next problem, PCB looses rats), Joshua Boyd
      • Re: gEDA-user: Use of Alt+Mouse1 (was: Next problem, PCB looses rats), Windell H. Oskay
      • Re: gEDA-user: Use of Alt+Mouse1, Dave McGuire
      • Re: gEDA-user: Use of Alt+Mouse1, timecop
      • Re: gEDA-user: Use of Alt+Mouse1, shinobi . jack
      • Re: gEDA-user: Use of Alt+Mouse1, Dave McGuire
      • Re: gEDA-user: Use of Alt+Mouse1, Geoff Swan
      • Re: gEDA-user: Use of Alt+Mouse1, Dave McGuire
      • Re: gEDA-user: Use of Alt+Mouse1, Dave McGuire
      • Re: gEDA-user: Use of Alt+Mouse1, Armin Faltl
      • Re: gEDA-user: Use of Alt+Mouse1, John Griessen
      • Re: gEDA-user: Next problem, PCB looses rats, Christian Riggenbach
      • Re: gEDA-user: Next problem, PCB looses rats, Armin Faltl
      • Re: gEDA-user: Next problem, PCB looses rats, kai-martin knaak
      • Re: gEDA-user: Next problem, PCB looses rats, Armin Faltl
• Re: gEDA-user: PCB Patches: Use c99 bool instead of manual typedef., DJ Delorie
  • Re: gEDA-user: PCB Patches: Use c99 bool instead of manual typedef., Peter Clifton
    • Re: gEDA-user: PCB Patches: Use c99 bool instead of manual typedef., timecop
    • Re: gEDA-user: PCB Patches: Use c99 bool instead of manual typedef., Peter Clifton
      • Re: gEDA-user: PCB Patches: Use c99 bool instead of manual typedef., Robert Spanton
      • Re: gEDA-user: PCB Patches: Use c99 bool instead of manual typedef., Peter Clifton
      • Re: gEDA-user: PCB Patches: Use c99 bool instead of manual typedef., Robert Spanton
    • Re: gEDA-user: PCB Patches: Use c99 bool instead of manual typedef., Peter Clifton
      • Re: gEDA-user: PCB Patches: Use c99 bool instead of manual typedef., kai-martin knaak
      • Re: gEDA-user: PCB Patches: Use c99 bool instead of manual typedef., Peter Clifton
      • Re: gEDA-user: PCB Patches: Use c99 bool instead of manual typedef., kai-martin knaak
      • Re: gEDA-user: PCB Patches: Use c99 bool instead of manual typedef., Peter Clifton
    • Re: gEDA-user: PCB Patches: Use c99 bool instead of manual typedef., DJ Delorie
      • Re: gEDA-user: PCB Patches: Use c99 bool instead of manual typedef., Jared Casper
      • Re: gEDA-user: PCB Patches: Use c99 bool instead of manual typedef., Peter TB Brett
      • Re: gEDA-user: PCB Patches: Use c99 bool instead of manual typedef., Jared Casper
      • Re: gEDA-user: PCB Patches: Use c99 bool instead of manual typedef., Peter Clifton
      • Re: gEDA-user: PCB Patches: Use c99 bool instead of manual typedef., DJ Delorie
      • Re: gEDA-user: PCB Patches: Use c99 bool instead of manual typedef., John Griessen
      • Re: gEDA-user: PCB Patches: Use c99 bool instead of manual typedef., Peter Clifton
      • Re: gEDA-user: PCB Patches: Use c99 bool instead of manual typedef., Armin Faltl
      • Re: gEDA-user: PCB Patches: Use c99 bool instead of manual typedef., Peter Clifton
• Re: gEDA-user: PCB patches (was: [PATCH 1/7] PCB localization), Jared Casper
• gEDA-user: Placing big amount of parts to the schematic (automatically...), Tamas Szabo
  • Re: gEDA-user: Placing big amount of parts to the schematic (automatically...), Stefan Salewski
    • Re: gEDA-user: Placing big amount of parts to the schematic (automatically...), Tamas Szabo
      • Re: gEDA-user: Placing big amount of parts to the schematic (automatically...), Werner Hoch
      • Re: gEDA-user: Placing big amount of parts to the schematic (automatically...), Tamas Szabo
  • Re: gEDA-user: Placing big amount of parts to the schematic (automatically...), John Griessen
    • Re: gEDA-user: Placing big amount of parts to the schematic (automatically...), Tamas Szabo
• gEDA-user: git HEAD PCB now supports user-defined holes in polygons, Peter Clifton
  • Re: gEDA-user: git HEAD PCB now supports user-defined holes in polygons, Peter Clifton
    • Re: gEDA-user: git HEAD PCB now supports user-defined holes in polygons, Kai-Martin Knaak
      • Re: gEDA-user: git HEAD PCB now supports user-defined holes in polygons, Peter TB Brett
      • Re: gEDA-user: git HEAD PCB now supports user-defined holes in polygons, Peter Clifton
      • Re: gEDA-user: git HEAD PCB now supports user-defined holes in polygons, kai-martin knaak
      • Re: gEDA-user: git HEAD PCB now supports user-defined holes in polygons, Jim
      • Re: gEDA-user: git HEAD PCB now supports user-defined holes in polygons, Kai-Martin Knaak
      • Re: gEDA-user: git HEAD PCB now supports user-defined holes in polygons, Jim
      • Re: gEDA-user: git HEAD PCB now supports user-defined holes in polygons, Kai-Martin Knaak
      • Re: gEDA-user: git HEAD PCB now supports user-defined holes in polygons, Peter Clifton
      • Re: gEDA-user: git HEAD PCB now supports user-defined holes in polygons, Ben Jackson
      • Re: gEDA-user: git HEAD PCB now supports user-defined holes in polygons, Peter Clifton
      • Re: gEDA-user: git HEAD PCB now supports user-defined holes in polygons, kai-martin knaak
      • Re: gEDA-user: git HEAD PCB now supports user-defined holes in polygons, Armin Faltl
      • Re: gEDA-user: git HEAD PCB now supports user-defined holes in polygons, Kai-Martin Knaak
      • Re: gEDA-user: git HEAD PCB now supports user-defined holes in polygons, Armin Faltl
      • Re: gEDA-user: git HEAD PCB now supports user-defined holes in polygons, Armin Faltl
      • Re: gEDA-user: git HEAD PCB now supports user-defined holes in polygons, Kai-Martin Knaak
  • Re: gEDA-user: git HEAD PCB now supports user-defined holes in polygons, kai-martin knaak
    • Re: gEDA-user: git HEAD PCB now supports user-defined holes in polygons, Peter Clifton
  • Re: gEDA-user: git HEAD PCB now supports user-defined holes in polygons, Levente Kovacs
    • Re: gEDA-user: git HEAD PCB now supports user-defined holes in polygons, Peter Clifton
• gEDA-user: Polygon combiner plugin, Peter Clifton
  • Re: gEDA-user: Polygon combiner plugin, Armin Faltl
    • Re: gEDA-user: Polygon combiner plugin, Peter Clifton
      • Re: gEDA-user: Polygon combiner plugin, Peter Clifton
      • Re: gEDA-user: Polygon combiner plugin, Armin Faltl
      • Re: gEDA-user: Polygon combiner plugin, Peter Clifton
• gEDA-user: Segfault on startup and garbage drawn outside of pcb board area, Krzysztof KoÅciuszkiewicz
  • Re: gEDA-user: Segfault on startup and garbage drawn outside of pcb board area, kai-martin knaak
  • Re: gEDA-user: Segfault on startup and garbage drawn outside of pcb board area, Peter Clifton
    • Re: gEDA-user: Segfault on startup and garbage drawn outside of pcb board area, Krzysztof KoÅciuszkiewicz
      • Re: gEDA-user: Segfault on startup and garbage drawn outside of pcb board area, Peter Clifton
      • Re: gEDA-user: Garbage drawn outside of pcb board area, Krzysztof KoÅciuszkiewicz
      • Re: gEDA-user: Garbage drawn outside of pcb board area, Krzysztof KoÅciuszkiewicz
      • Re: gEDA-user: Garbage drawn outside of pcb board area, Peter Clifton
  • Re: gEDA-user: Segfault on startup and garbage drawn outside of pcb board area, Peter Clifton
    • Re: gEDA-user: Segfault on startup and garbage drawn outside of pcb board area, Krzysztof KoÅciuszkiewicz
• gEDA-user: Changing traces from one layer to another, vinny
  • Re: gEDA-user: Changing traces from one layer to another, Richard Barlow
  • Re: gEDA-user: Changing traces from one layer to another, kai-martin knaak
  • <Possible follow-ups>
  • Re: gEDA-user: Changing traces from one layer to another, vinny
• gEDA-user: Syd Levine Bus Number, Bob Paddock
  • Re: gEDA-user: Syd Levine Bus Number, Mark Rages
    • Re: gEDA-user: Syd Levine Bus Number, Bob Paddock
      • Re: gEDA-user: Syd Levine Bus Number, Dave McGuire
• gEDA-user: cutout in plane, gene glick
  • Re: gEDA-user: cutout in plane, DJ Delorie
    • Re: gEDA-user: cutout in plane, gene glick
      • Re: gEDA-user: cutout in plane, gene glick
      • Re: gEDA-user: cutout in plane, DJ Delorie
      • Re: gEDA-user: cutout in plane, gene glick
      • Re: gEDA-user: cutout in plane, DJ Delorie
• gEDA-user: Z8018216FSC and FDC37C665IR, David Griffith
• gEDA-user: Script for converting mm to hundredths of thou, Robert Spanton
  • Re: gEDA-user: Script for converting mm to hundredths of thou, Stefan Salewski
    • Re: gEDA-user: Script for converting mm to hundredths of thou, Stefan Salewski
      • Re: gEDA-user: Script for converting mm to hundredths of thou, DJ Delorie
      • Re: gEDA-user: Script for converting mm to hundredths of thou, Kai-Martin Knaak
      • Re: gEDA-user: Script for converting mm to hundredths of thou, DJ Delorie
      • Re: gEDA-user: Script for converting mm to hundredths of thou, Stephan Boettcher
    • Re: gEDA-user: Script for converting mm to hundredths of thou, Robert Spanton
• gEDA-user: gsch2pcb (gnetlist) generates corrupted pcb output, Matthew Lai
  • Re: gEDA-user: gsch2pcb (gnetlist) generates corrupted pcb output, kai-martin knaak
    • Re: gEDA-user: gsch2pcb (gnetlist) generates corrupted pcb output, Matthew Lai
      • Re: gEDA-user: gsch2pcb (gnetlist) generates corrupted pcb output, Stefan Salewski
      • Re: gEDA-user: gsch2pcb (gnetlist) generates corrupted pcb output, Matthew Lai
      • Re: gEDA-user: gsch2pcb (gnetlist) generates corrupted pcb output, Stefan Salewski
      • Re: gEDA-user: gsch2pcb (gnetlist) generates corrupted pcb output, Matthew Lai
      • Re: gEDA-user: gsch2pcb (gnetlist) generates corrupted pcb output, Armin Faltl
      • Re: gEDA-user: gsch2pcb (gnetlist) generates corrupted pcb output, Stefan Salewski
      • Re: gEDA-user: gsch2pcb (gnetlist) generates corrupted pcb output, Stefan Salewski
      • Re: gEDA-user: gsch2pcb (gnetlist) generates corrupted pcb output, Stefan Salewski
      • Re: gEDA-user: gsch2pcb (gnetlist) generates corrupted pcb output, Stefan Salewski
      • Re: gEDA-user: gsch2pcb (gnetlist) generates corrupted pcb output, Matthew Lai
      • Re: gEDA-user: gsch2pcb (gnetlist) generates corrupted pcb output, Matthew Lai
      • Re: gEDA-user: gsch2pcb (gnetlist) generates corrupted pcb output, Stefan Salewski
      • Re: gEDA-user: gsch2pcb (gnetlist) generates corrupted pcb output, joe tarantino
      • Re: gEDA-user: gsch2pcb (gnetlist) generates corrupted pcb output, Matthew Lai
      • Re: gEDA-user: gsch2pcb (gnetlist) generates corrupted pcb output, Dan McMahill
  • Re: gEDA-user: gsch2pcb (gnetlist) generates corrupted pcb output, George M. Gallant, Jr.
• gEDA-user: OT: Scaling axes for data plots -- C function available, Stefan Salewski
  • Re: gEDA-user: OT: Scaling axes for data plots -- C function available, Armin Faltl
  • Re: gEDA-user: OT: Scaling axes for data plots -- C function available, Armin Faltl
• gEDA-user: Buses and gnetlist/pcb?, Matthew Lai
  • Re: gEDA-user: Buses and gnetlist/pcb?, Vanessa Ezekowitz
    • Re: gEDA-user: Buses and gnetlist/pcb?, Matthew Lai
• gEDA-user: broken part, gedau
  • Re: gEDA-user: broken part, Greg Cunningham
• gEDA-user: pcb still unable to run actions with print HID, kai-martin knaak
  • Re: gEDA-user: pcb still unable to run actions with print HID, Jared Casper
• gEDA-user: Diode pin numbers reversed?, Matthew Lai
  • Re: gEDA-user: Diode pin numbers reversed?, Ben Jackson
  • Re: gEDA-user: Diode pin numbers reversed?, Armin Faltl
  • Re: gEDA-user: Diode pin numbers reversed?, Gabriel Paubert
    • Re: gEDA-user: Diode pin numbers reversed?, Stephan Boettcher
• gEDA-user: pcb: print bottom side with top silk, Kai-Martin Knaak
  • Re: gEDA-user: pcb: print bottom side with top silk, Armin Faltl
• gEDA-user: RMS Waveform of a signal, Rubén Gómez Antolí
  • Re: gEDA-user: RMS Waveform of a signal, al davis
    • Re: gEDA-user: RMS Waveform of a signal, Rubén Gómez Antolí
      • Re: gEDA-user: RMS Waveform of a signal, Richard Balogh
      • Re: gEDA-user: RMS Waveform of a signal, John Griessen
      • Re: gEDA-user: RMS Waveform of a signal, Rubén Gómez Antolí
      • Re: gEDA-user: RMS Waveform of a signal, Rubén Gómez Antolí
  • Re: gEDA-user: RMS Waveform of a signal, Armin Faltl
    • Re: gEDA-user: RMS Waveform of a signal, Rubén Gómez Antolí
      • Re: gEDA-user: RMS Waveform of a signal, timecop
      • Re: gEDA-user: RMS Waveform of a signal, Rubén Gómez Antolí
      • Re: gEDA-user: RMS Waveform of a signal, Armin Faltl
      • Re: gEDA-user: RMS Waveform of a signal, Dan McMahill
      • Re: gEDA-user: RMS Waveform of a signal, Rubén Gómez Antolí
    • Re: gEDA-user: RMS Waveform of a signal, John Griessen
• gEDA-user: Power rail net clarification, Nikos Arechiga
  • Re: gEDA-user: Power rail net clarification, Felipe De la Puente Christen
    • Re: gEDA-user: Power rail net clarification, Nikos Arechiga
  • <Possible follow-ups>
  • Re: gEDA-user: Power rail net clarification, myken
• gEDA-user: homebrew UV photoplotter for direct exposing of photo-etch-resist on laminate, John Griessen
  • Re: gEDA-user: homebrew UV photoplotter for direct exposing of photo-etch-resist on laminate, Armin Faltl
    • Re: gEDA-user: homebrew UV photoplotter for direct exposing of photo-etch-resist on laminate, Christoph Lechner
      • Re: gEDA-user: homebrew UV photoplotter for direct exposing of photo-etch-resist on laminate, Dave McGuire
      • Re: gEDA-user: homebrew UV photoplotter for direct exposing of photo-etch-resist on laminate, Christoph Lechner
      • Re: gEDA-user: homebrew UV photoplotter for direct exposing of photo-etch-resist on laminate, DJ Delorie
      • Re: gEDA-user: homebrew UV photoplotter for direct exposing of photo-etch-resist on laminate, Dave McGuire
      • Re: gEDA-user: homebrew UV photoplotter for direct exposing of photo-etch-resist on laminate, DJ Delorie
      • Re: gEDA-user: homebrew UV photoplotter for direct exposing of photo-etch-resist on laminate, John Griessen
      • Re: gEDA-user: homebrew UV photoplotter for direct exposing of photo-etch-resist on laminate, Dave McGuire
      • Re: gEDA-user: homebrew UV photoplotter for direct exposing of photo-etch-resist on laminate, DJ Delorie
      • Re: gEDA-user: homebrew UV photoplotter for direct exposing of photo-etch-resist on laminate, Christoph Lechner
      • Re: gEDA-user: homebrew UV photoplotter for direct exposing of photo-etch-resist on laminate, John Griessen
      • Re: gEDA-user: homebrew UV photoplotter for direct exposing of photo-etch-resist on laminate, Dave McGuire
      • Re: gEDA-user: homebrew UV photoplotter for direct exposing of photo-etch-resist on laminate, Armin Faltl
• gEDA-user: Weird DRC error, myken
  • Re: gEDA-user: Weird DRC error, Stephan Boettcher
  • Re: gEDA-user: Weird DRC error, Stefan Salewski
  • Re: gEDA-user: Weird DRC error, Stefan Salewski
  • Re: gEDA-user: Weird DRC error, DJ Delorie
  • <Possible follow-ups>
  • Re: gEDA-user: Weird DRC error, myken
• gEDA-user: pcb crash, Maciej Pijanka
  • Re: gEDA-user: pcb crash, Maciej Pijanka
• gEDA-user: pcb and multi pin connectors, Kai-Martin Knaak
• gEDA-user: Structure of Iverilog Windows Version, Ronald Mathias
  • Re: gEDA-user: Structure of Iverilog Windows Version, Stephen Williams
• gEDA-user: PCB "import schematic", Gareth Edwards
  • Re: gEDA-user: PCB "import schematic", Gareth Edwards
    • Re: gEDA-user: PCB "import schematic", Gareth Edwards
    • Re: gEDA-user: PCB "import schematic", Patrick Bernaud
  • Re: gEDA-user: PCB "import schematic", DJ Delorie
    • Re: gEDA-user: PCB "import schematic", Gareth Edwards
• gEDA-user: Port Geda-tools to Android/Maemo/Meego platforms?, Rubén Gómez Antolí
• gEDA-user: dxf dwg viewer?, gene glick
  • Re: gEDA-user: dxf dwg viewer?, Duncan Drennan
  • Re: gEDA-user: dxf dwg viewer?, Stephen Ecob
    • Re: gEDA-user: dxf dwg viewer?, gene glick
• gEDA-user: PCB: install gaf scheme to another directory (Was: Re: PCB "import schematic"), Gareth Edwards
• gEDA-user: moving slotting to pcb?, DJ Delorie
  • Re: gEDA-user: moving slotting to pcb?, kai-martin knaak
  • Re: gEDA-user: moving slotting to pcb?, John Doty
    • Re: gEDA-user: moving slotting to pcb?, John Griessen
      • Re: gEDA-user: moving slotting to pcb?, Armin Faltl
      • Re: gEDA-user: moving slotting to pcb?, John Griessen
    • Re: gEDA-user: moving slotting to pcb?, Armin Faltl
      • Re: gEDA-user: moving slotting to pcb?, John Doty
      • Re: gEDA-user: moving slotting to pcb?, kai-martin knaak
      • Re: gEDA-user: moving slotting to pcb?, John Doty
      • Re: gEDA-user: moving slotting to pcb?, Steven Michalske
      • Re: gEDA-user: moving slotting to pcb?, John Doty
      • Re: gEDA-user: moving slotting to pcb?, kai-martin knaak
  • Re: gEDA-user: moving slotting to pcb?, phil
  • Re: gEDA-user: moving slotting to pcb?, Stefan Salewski
    • Re: gEDA-user: moving slotting to pcb?, kai-martin knaak
  • Re: gEDA-user: moving slotting to pcb?, Bert Timmerman
    • Re: gEDA-user: moving slotting to pcb?, DJ Delorie
      • Re: gEDA-user: moving slotting to pcb?, Bert Timmerman
      • Re: gEDA-user: moving slotting to pcb?, DJ Delorie
      • Re: gEDA-user: moving slotting to pcb?, Armin Faltl
      • Re: gEDA-user: moving slotting to pcb?, John Griessen
      • Re: gEDA-user: moving slotting to pcb?, DJ Delorie
      • Re: gEDA-user: moving slotting to pcb?, John Griessen
  • Re: gEDA-user: moving slotting to pcb?, John Griessen
• gEDA-user: gerbv undefined apertures warning, phil
• gEDA-user: sd card footprint, billium
  • Re: gEDA-user: sd card footprint, Bob Paddock
    • Re: gEDA-user: sd card footprint, billium
  • Re: gEDA-user: sd card footprint, gene glick
    • Re: gEDA-user: sd card footprint, billium
• gEDA-user: Export to SVG or visio, Phil Frost
  • Re: gEDA-user: Export to SVG or visio, timecop
  • Re: gEDA-user: Export to SVG or visio, Bob Paddock
    • Re: gEDA-user: Export to SVG or visio, timecop
      • Re: gEDA-user: Export to SVG or visio, asomers
  • Re: gEDA-user: Export to SVG or visio, Peter Clifton
• Re: gEDA-user: gattrib not a good spreadsheet editor, Mike Bushroe
  • Re: gEDA-user: gattrib not a good spreadsheet editor, Bob Paddock
  • Re: gEDA-user: gattrib not a good spreadsheet editor, John Doty
• gEDA-user: Books on RTL synthesis algorithms, Ronald Mathias