Mail Thread Index
- Re: gEDA-user: Line width of silk-screen text,
David Kuehling
- gEDA-user: footprint naming convention for MODULES?,
phil@xxxxxxxxxxxxx
- gEDA-user: autogenerate footprints,
Ostheller, Joel A.
- gEDA-user: pintype attritubute and gnetlist,
Ostheller, Joel A.
- gEDA-user: gsch2pcb : coming up empty,
Andy Peters
- Re: gEDA-user: gsch2pcb : coming up empty,
John Griessen
- Re: gEDA-user: gsch2pcb : coming up empty,
Andy Peters
- Re: gEDA-user: gsch2pcb : coming up empty,
John Luciani
- Re: gEDA-user: gsch2pcb : coming up empty,
Andy Peters
- Re: gEDA-user: gsch2pcb : coming up empty,
DJ Delorie
- Re: gEDA-user: gsch2pcb : coming up empty,
John Luciani
- Re: gEDA-user: gsch2pcb : coming up empty,
Andy Peters
- Re: gEDA-user: gsch2pcb : coming up empty,
Andy Peters
- Re: gEDA-user: gsch2pcb : coming up empty,
John Luciani
- Re: gEDA-user: gsch2pcb : coming up empty,
Hans Nieuwenhuis
- Re: gEDA-user: gsch2pcb : coming up empty,
Andy Peters
- Re: gEDA-user: gsch2pcb : coming up empty,
Hans Nieuwenhuis
- Success! was Re: gEDA-user: gsch2pcb : coming up empty,
Andy Peters
- Re: gEDA-user: gsch2pcb : coming up empty,
Andy Peters
- Re: gEDA-user: gsch2pcb : coming up empty,
John Luciani
- Re: gEDA-user: gsch2pcb : coming up empty,
Andy Peters
- Re: gEDA-user: gsch2pcb : coming up empty,
Andy Peters
- <Possible follow-ups>
- RE: gEDA-user: gsch2pcb : coming up empty,
Ostheller, Joel A.
- gEDA-user: [pcb] RenumberBlock plug-in,
DJ Delorie
- gEDA-user: mv M4 libraries,
Ostheller, Joel A.
- gEDA-user: good idea - bad idea ?,
Ostheller, Joel A.
- gEDA-user: PCB Autorouter is awesome.,
phil@xxxxxxxxxxxxx
- gEDA-user: Newbie fab Qs,
craigni
- Re: gEDA-user: Re: hierarchy of schematics,
Andy Peters
- gEDA-user: random observations,
Andy Peters
- gEDA-user: power connections and hierarchy,
Kai-Martin Knaak
- gEDA-user: Solder Mask Clearance,
Mike Hansen
- Re: gEDA-user: Solder Mask Clearance,
DJ Delorie
- Re: gEDA-user: Solder Mask Clearance,
Mike Hansen
- Re: gEDA-user: Solder Mask Clearance,
DJ Delorie
- Re: gEDA-user: Solder Mask Clearance,
Mike Hansen
- Re: gEDA-user: Solder Mask Clearance,
DJ Delorie
- Re: gEDA-user: Solder Mask Clearance,
Mike Hansen
- Re: gEDA-user: Solder Mask Clearance,
DJ Delorie
- Re: gEDA-user: Solder Mask Clearance,
Mike Hansen
- Re: gEDA-user: Solder Mask Clearance,
DJ Delorie
- Re: gEDA-user: Solder Mask Clearance,
Mike Hansen
- Re: gEDA-user: Solder Mask Clearance,
DJ Delorie
- Re: gEDA-user: Solder Mask Clearance,
Mike Hansen
- Re: gEDA-user: Solder Mask Clearance,
DJ Delorie
- Re: gEDA-user: Solder Mask Clearance,
Mike Hansen
- Re: gEDA-user: Solder Mask Clearance,
Mike Hansen
- gEDA-user: Gschem aborts when adding a pin,
Terry Barnaby
- gEDA-user: undo "ev",
Mark Rages
- Re: gEDA-user: off-page references,
Lares Moreau
- gEDA-user: Free Dog Meeting, Tuesday January 16th!,
Stuart Brorson
- gEDA-user: PC104 Footprint?,
Lares Moreau
- gEDA-user: latest CVS version -> happy user with a request,
Adrian Nania
- gEDA-user: PCB cvs segmentation fault,
Dimitri Princen
- gEDA-user: wiki entry on hierarchy,
Kai-Martin Knaak
- gEDA-user: bulk embeddeding?,
DJ Delorie
- gEDA-user: for gEDA CVS, add/copy-component-hook has two small bugs.,
Adrian Nania
- gEDA-user: small fonts when printing from gschem,
David Rowe
- gEDA-user: PCB antenna and solder mask,
David Kuehling
- gEDA-user: I need layer for board outline,
Evgeny M. Zubok
- gEDA-user: spice-sdb - NPN model in gschem,
KURT PETERS
- gEDA-user: GND vs. PGND,
David Kuehling
- gEDA-user: RE: geda-user Digest, Vol 8, Issue 20,
KURT PETERS
- gEDA-user: updating layout with new footprint,
Ostheller, Joel A.
- Re: gEDA-user: updating layout with new footprint,
DJ Delorie
- RE: gEDA-user: updating layout with new footprint,
Ostheller, Joel A.
- Re: gEDA-user: updating layout with new footprint,
DJ Delorie
- Re: gEDA-user: updating layout with new footprint,
John Griessen
- Re: gEDA-user: updating layout with new footprint,
DJ Delorie
- RE: gEDA-user: updating layout with new footprint,
Ostheller, Joel A.
- Re: gEDA-user: updating layout with new footprint,
DJ Delorie
- RE: gEDA-user: updating layout with new footprint,
Ostheller, Joel A.
- Re: gEDA-user: updating layout with new footprint,
DJ Delorie
- gEDA-user: Re: updating layout with new footprint,
Kai-Martin Knaak
- Re: gEDA-user: updating layout with new footprint,
joeft
- gEDA-user: GEDA Code Sprint -- Feb 10th. Mark your calendars!,
Stuart Brorson
- gEDA-user: ground / power layers,
Ostheller, Joel A.
- gEDA-user: GEDA Code Sprint: Idea,
Lares Moreau
- gEDA-user: PCB general question,
Ostheller, Joel A.
- gEDA-user: furnace board 2 preview,
DJ Delorie
- gEDA-user: Gschem to PCB pin names to numbers,
Terry Barnaby
- gEDA-user: PCB gerber export problem,
Tomaz Solc
- gEDA-user: pcb crash when highlighting net,
joeft
- gEDA-user: gsch2pcb not updating schematic properly,
David Kuehling
- gEDA-user: Silk on vias,
David Kuehling
- gEDA-user: Gschem q?,
Lares Moreau
- gEDA-user: circuit simulation - backend library?,
kitts
- gEDA-user: Segfault in PS hid -> patch,
Hans Nieuwenhuis
- gEDA-user: Newbie question on Icarus and ARM,
Teresa Ooi
- gEDA-user: Thermal via in pad,
David Kuehling
- gEDA-user: PCB gerber export problem - update,
Tomaz Solc
- gEDA-user: Another m4 problem....,
Lares Moreau
- gEDA-user: gEDA install not detecting GTK+ on Fedora 6,
Corey Wirun - nexus
- gEDA-user: Hide specific rats nests,
Kai-Martin Knaak
- gEDA-user: 56 Pin part with lots of No Connects,
KURT PETERS
- gEDA-user: Which PCB HID is better?,
Michael Sokolov
- gEDA-user: Free Dog Meeting -- Tonight in Reading, MA!,
Stuart Brorson
- gEDA-user: pcb autorouter segfaults on lineout lines outside,
Kai-Martin Knaak
- gEDA-user: Some pcb pecularities,
Kai-Martin Knaak
- gEDA-user: Footprint Library Updates at luciani.org,
John Luciani
- gEDA-user: resistorpack12-1.sym have 12 resistors?,
csanyipal
- gEDA-user: Need a Verilog test run,
Stephen Williams
- gEDA-user: resistorpack12-1.sym have 11 resistors?,
csanyipal
- gEDA-user: Free dogs in Southern California?,
Michael Sokolov
- gEDA-user: Dual position resistors in gschem/pcb,
Michael Sokolov
- gEDA-user: rs232 ferrite size?,
DJ Delorie
- gEDA-user: how to covnert netlist to schema,
ludovic smadja
- gEDA-user: Galaksija motherboard,
Tomaz Solc
- gEDA-user: Label Selection.,
Lares Moreau
- gEDA-user: PCB manufacture,
Lares Moreau
- gEDA-user: PCB - Rectangle/Polygon on pad,
KURT PETERS
- gEDA-user: PTC thermistor footprint,
Michael Sokolov
- gEDA-user: [pcb] lesstif netlist dialog enhancements,
DJ Delorie
- gEDA-user: Fitting a hobbyist design into someone else's form factor,
Michael Sokolov
- gEDA-user: I need to open and print a PCB created in ExpressPCB: What are my options?,
Jeremy Pedersen
- Re: gEDA-user: I need to open and print a PCB created in ExpressPCB: What are my options?,
DJ Delorie
- Re: gEDA-user: I need to open and print a PCB created in ExpressPCB: What are my options?,
Mark Rages
- Re: gEDA-user: I need to open and print a PCB created in ExpressPCB: What are my options?,
DJ Delorie
- Re: gEDA-user: I need to open and print a PCB created in ExpressPCB: What are my options?,
Jeremy Pedersen
- Re: gEDA-user: I need to open and print a PCB created in ExpressPCB: What are my options?,
DJ Delorie
- Re: gEDA-user: I need to open and print a PCB created in ExpressPCB: What are my options?,
Karl.
- Re: gEDA-user: I need to open and print a PCB created in ExpressPCB: What are my options?,
DJ Delorie
- RE: gEDA-user: I need to open and print a PCB created in ExpressPCB:What are my options?,
Ostheller, Joel A.
- Re: gEDA-user: I need to open and print a PCB created in ExpressPCB:What are my options?,
Lares Moreau
- Re: gEDA-user: I need to open and print a PCB created in ExpressPCB:What are my options?,
Jeremy Pedersen
- Re: gEDA-user: I need to open and print a PCB created in ExpressPCB:What are my options?,
DJ Delorie
- Re: gEDA-user: I need to open and print a PCB created in ExpressPCB:What are my options?,
John Luciani
- Re: gEDA-user: I need to open and print a PCB created in ExpressPCB:What are my options?,
Jeremy Pedersen
- Re: gEDA-user: I need to open and print a PCB created in ExpressPCB:What are my options?,
DJ Delorie
- Re: gEDA-user: I need to open and print a PCB created in ExpressPCB:What are my options?,
Mark Rages
- Re: gEDA-user: I need to open and print a PCB created in ExpressPCB:What are my options?,
Dave McGuire
- Re: gEDA-user: I need to open and print a PCB created in ExpressPCB:What are my options?,
DJ Delorie
- Re: gEDA-user: I need to open and print a PCB created in ExpressPCB:What are my options?,
Peter Clifton
- Re: gEDA-user: I need to open and print a PCB created in ExpressPCB:What are my options?,
John Luciani
- Re: gEDA-user: I need to open and print a PCB created in ExpressPCB:What are my options?,
DJ Delorie
- RE: gEDA-user: I need to open and print a PCB created inExpressPCB:What are my options?,
Ostheller, Joel A.
- Re: gEDA-user: I need to open and print a PCB created inExpressPCB:What are my options?,
DJ Delorie
- Re: gEDA-user: I need to open and print a PCB created inExpressPCB:What are my options?,
DJ Delorie
- RE: gEDA-user: I need to open and print a PCB createdinExpressPCB:What are my options?,
Ostheller, Joel A.
- Re: gEDA-user: I need to open and print a PCB createdinExpressPCB:What are my options?,
DJ Delorie
- gEDA-user: Re: Scope,
Ostheller, Joel A.
- Re: gEDA-user: Re: Scope,
DJ Delorie
- Re: gEDA-user: I need to open and print a PCB createdinExpressPCB:What are my options?,
Jeremy Pedersen
- Re: gEDA-user: I need to open and print a PCB created in ExpressPCB:What are my options?,
Dan McMahill
- Re: gEDA-user: I need to open and print a PCB created in ExpressPCB:What are my options?,
DJ Delorie
- Re: gEDA-user: I need to open and print a PCB created in ExpressPCB:What are my options?,
Steve Meier
- Re: gEDA-user: I need to open and print a PCB created in ExpressPCB:What are my options?,
Darrell Harmon
- Re: gEDA-user: I need to open and print a PCB created in ExpressPCB:What are my options?,
Dave McGuire
- Re: gEDA-user: I need to open and print a PCB created in ExpressPCB:What are my options?,
John Luciani
- Re: gEDA-user: I need to open and print a PCB created in ExpressPCB:What are my options?,
Dave McGuire
- Re: gEDA-user: I need to open and print a PCB created in ExpressPCB:What are my options?,
Jeremy Pedersen
- Re: gEDA-user: I need to open and print a PCB created in ExpressPCB:What are my options?,
Mark Rages
- Re: gEDA-user: I need to open and print a PCB created in ExpressPCB:What are my options?,
DJ Delorie
- Re: gEDA-user: I need to open and print a PCB created in ExpressPCB:What are my options?,
John Luciani
- gEDA-user: Re: I need to open and print a PCB created in ExpressPCB:What are my options?,
Levente Kovacs
- Re: gEDA-user: Re: I need to open and print a PCB created in ExpressPCB:What are my options?,
Jeremy Pedersen
- Re: gEDA-user: Re: I need to open and print a PCB created in ExpressPCB:What are my options?,
Dave McGuire
- Re: gEDA-user: Re: I need to open and print a PCB created in ExpressPCB:What are my options?,
Jeremy Pedersen
- Re: gEDA-user: Re: I need to open and print a PCB created in ExpressPCB:What are my options?,
Dave McGuire
- Message not available
- Message not available
- Message not available
- Re: gEDA-user: Re: I need to open and print a PCB created in ExpressPCB:What are my options?,
Jeremy Pedersen
Re: gEDA-user: I need to open and print a PCB created in ExpressPCB: What are my options?,
John Luciani
gEDA-user: PCB multiple footprint selection,
Ed & Angie S.
gEDA-user: board cutout in PCB,
Hans Nieuwenhuis
gEDA-user: gnucap: Multi-disciplinary / mixed language simulation,
Peter Clifton
Mail converted by MHonArc 2.6.10