Mail Index

• Thread Index

• gEDA-user: pcb:All v. Any pin connectivity
  • From: João Silva
• Re: gEDA-user: Solder mask clearances for SMD devices
  • From: Александр Гвоздев
• Re: gEDA-user: can't route to TSSOP
  • From: Vaclav Peroutka
• Re: gEDA-user: TL431
  • From: Wojciech Kazubski
• Re: gEDA-user: TL431
  • From: Wojciech Kazubski
• Re: gEDA-user: very simple gnucap simulation
  • From: al davis
• Re: gEDA-user: very simple gnucap simulation
  • From: al davis
• Re: gEDA-user: OT: Latex
  • From: al davis
• Re: gEDA-user: why separate xgsch2pcb?
  • From: al davis
• Re: gEDA-user: Eagle to gEDA conversion path??
  • From: al davis
• Re: gEDA-user: analog/code co-simulation and schematics and netlists for silicon
  • From: al davis
• Re: gEDA-user: analog/code co-simulation and schematics and netlists for silicon
  • From: al davis
• Re: gEDA-user: Eagle to gEDA conversion path??
  • From: al davis
• Re: gEDA-user: gEDA user: gnetlist -gdrc buffer overflow and gnetlist -gspice-sdb killed
  • From: al davis
• Re: gEDA-user: gEDA user: gnetlist -gdrc buffer overflow and gnetlist -gspice-sdb killed
  • From: al davis
• Re: gEDA-user: I am such a troll for posting to slashdot
  • From: al davis
• Re: gEDA-user: right-mouse-click rotate
  • From: Alberto Maccioni
• Re: gEDA-user: right-mouse-click rotate
  • From: Alberto Maccioni
• Re: gEDA-user: Changing key bindings in PCB
  • From: Alberto Maccioni
• Re: gEDA-user: right-mouse-click rotate
  • From: Alberto Maccioni
• Re: gEDA-user: --enable-cluster option.
  • From: Ales Hvezda
• Re: gEDA-user: how to push/commit a new vbpp to geda?
  • From: Ales Hvezda
• gEDA-user: Please update your translations for gEDA/gaf in prep for a release
  • From: Ales Hvezda
• gEDA-user: gEDA/gaf stable version 1.6.1-20100214 released!
  • From: Ales Hvezda
• Re: gEDA-user: how to push/commit a new vbpp to geda?
  • From: Ales Hvezda
• Re: gEDA-user: how to push/commit a new vbpp to geda?
  • From: Ales Hvezda
• Re: gEDA-user: Open Source mechanical CAD on the horizon
  • From: Ales Hvezda
• gEDA-user: I am such a troll for posting to slashdot
  • From: Ales Hvezda
• Re: gEDA-user: I am such a troll for posting to slashdot
  • From: Ales Hvezda
• Re: gEDA-user: I am such a troll for posting to slashdot
  • From: Ales Hvezda
• gEDA-user: gEDA/gaf Mac OSX screenshots?
  • From: Ales Hvezda
• Re: gEDA-user: Open Source mechanical CAD on the horizon
  • From: Ales Hvezda
• gEDA-user: gEDA project links updated
  • From: Ales Hvezda
• Re: gEDA-user: gEDA/gaf Mac OSX screenshots?
  • From: Ales Hvezda
• gEDA-user: Changing the author name on the fabrication drawings
  • From: Andrew Miner
• Re: gEDA-user: pcb: All v. Any pin connectivity
  • From: andrewm
• Re: gEDA-user: new components
  • From: Andy Fierman
• Re: gEDA-user: Getting new linux, which distribution?
  • From: Andy Fierman
• Re: gEDA-user: Getting new linux, which distribution?
  • From: Andy Fierman
• Re: gEDA-user: TL431
  • From: Andy Fierman
• Re: gEDA-user: Open Source mechanical CAD on the horizon
  • From: Andy Fierman
• Re: gEDA-user: topo router for PCB
  • From: Anthony Blake
• Re: gEDA-user: Toporouter update?
  • From: Anthony Blake
• Re: gEDA-user: Toporouter update?
  • From: Anthony Blake
• Re: gEDA-user: Toporouter update?
  • From: Anthony Blake
• gEDA-user: Is it possible to do square holes in PCB?
  • From: Anthony Shanks
• Re: gEDA-user: Is it possible to do square holes in PCB?
  • From: Anthony Shanks
• gEDA-user: Move all selected objects 100 mils to the left, possible?
  • From: Anthony Shanks
• Re: gEDA-user: TL431
  • From: asomers
• Re: gEDA-user: I am such a troll for posting to slashdot
  • From: asomers
• Re: gEDA-user: why separate xgsch2pcb?
  • From: Bas Gieltjes
• Re: gEDA-user: more kvetch re: pcb Arcs
  • From: Ben Jackson
• Re: gEDA-user: new components
  • From: Ben Jackson
• Re: gEDA-user: new components
  • From: Ben Jackson
• Re: gEDA-user: pcb join pad to polygon
  • From: Ben Jackson
• Re: gEDA-user: what does "Error while clipping PBO_SUB: 3" mean?
  • From: Ben Jackson
• Re: gEDA-user: PCB Prototype houses that do 0.031" boards?
  • From: Ben Jackson
• Re: gEDA-user: any last minute advice prior to sending out for PCB fab
  • From: Ben Jackson
• Re: gEDA-user: any last minute advice prior to sending out for PCB fab
  • From: Ben Jackson
• gEDA-user: Another way to make homemade vias?
  • From: Ben Jackson
• Re: gEDA-user: I am such a troll for posting to slashdot
  • From: Ben Jackson
• Re: gEDA-user: I am such a troll for posting to slashdot
  • From: Ben Jackson
• gEDA-user: [Patch] Updated the Dutch translation for gschem
  • From: Bert Timmerman
• Re: gEDA-user: more kvetch re: pcb Arcs
  • From: Bert Timmerman
• Re: gEDA-user: Translations for gEDA 1.6.1....
  • From: Bert Timmerman
• Re: gEDA-user: Translations for gEDA 1.6.1....
  • From: Bert Timmerman
• Re: gEDA-user: Translations for gEDA 1.6.1....
  • From: Bert Timmerman
• Re: gEDA-user: Message and Library windows
  • From: Bert Timmerman
• Re: gEDA-user: I am such a troll for posting to slashdot
  • From: Bert Timmerman
• gEDA-user: PCB Prototype houses that do 0.031" boards?
  • From: Bob Paddock
• Re: gEDA-user: TL431
  • From: Bob Paddock
• Re: gEDA-user: any last minute advice prior to sending out for PCB fab
  • From: Bob Paddock
• Re: gEDA-user: any last minute advice prior to sending out for PCB fab
  • From: Bob Paddock
• Re: gEDA-user: any last minute advice prior to sending out for PCB fab
  • From: Bob Paddock
• Re: gEDA-user: any last minute advice prior to sending out for PCB fab
  • From: Bob Paddock
• Re: gEDA-user: any last minute advice prior to sending out for PCB fab
  • From: Bob Paddock
• Re: gEDA-user: Open Source mechanical CAD on the horizon
  • From: Bob Paddock
• Re: gEDA-user: gedasymbols.org down
  • From: Bob Paddock
• Re: gEDA-user: gedasymbols.org down
  • From: Bob Paddock
• Re: gEDA-user: I am such a troll for posting to slashdot
  • From: Bob Paddock
• Re: gEDA-user: I am such a troll for posting to slashdot
  • From: Bob Paddock
• Re: gEDA-user: I am such a troll for posting to slashdot
  • From: Bob Paddock
• Re: gEDA-user: I am such a troll for posting to slashdot
  • From: Bob Paddock
• Re: gEDA-user: Translations for gEDA 1.6.1....
  • From: Carlos Nieves Ónega
• Re: gEDA-user: Translations for gEDA 1.6.1.... (ROOT MENU ACCELERATORS)
  • From: Carlos Nieves Ónega
• Re: gEDA-user: desktop-i18n in gEDA
  • From: Charles Lepple
• Re: gEDA-user: desktop-i18n in gEDA
  • From: Charles Lepple
• Re: gEDA-user: gEDA/gaf Mac OSX screenshots?
  • From: Charles Lepple
• Re: gEDA-user: Native Mac OS X?
  • From: Charles Lepple
• Re: gEDA-user: Native Mac OS X?
  • From: Charles Lepple
• Re: gEDA-user: Native Mac OS X?
  • From: Charles Lepple
• Re: gEDA-user: Open Source mechanical CAD on the horizon
  • From: Chitlesh GOORAH
• gEDA-user: new components
  • From: Chris Cole
• Re: gEDA-user: new components
  • From: Chris Cole
• gEDA-user: very simple gnucap simulation
  • From: Chris Cole
• Re: gEDA-user: very simple gnucap simulation
  • From: Chris Cole
• Re: gEDA-user: very simple gnucap simulation
  • From: Chris Cole
• gEDA-user: why separate xgsch2pcb?
  • From: Chris Cole
• Re: gEDA-user: why separate xgsch2pcb?
  • From: Chris Cole
• Re: gEDA-user: why separate xgsch2pcb?
  • From: Chris Cole
• Re: gEDA-user: why separate xgsch2pcb?
  • From: Chris Cole
• gEDA-user: Problem With Macports Install
  • From: Chris Maness
• Re: gEDA-user: Problem With Macports Install
  • From: Chris Maness
• Re: gEDA-user: Problem With Macports Install
  • From: Chris Maness
• Re: gEDA-user: new components
  • From: Christian Riggenbach
• Re: gEDA-user: gedasymbols.org down
  • From: Christoph Lechner
• Re: gEDA-user: gedasymbols.org down
  • From: Christoph Lechner
• Re: gEDA-user: OT: Latex
  • From: Dan McMahill
• Re: gEDA-user: OT: Latex
  • From: Dan McMahill
• Re: gEDA-user: PCB GIT: missing members in SettingType
  • From: Dan McMahill
• Re: gEDA-user: any last minute advice prior to sending out for PCB fab
  • From: Dan McMahill
• Re: gEDA-user: Open Source mechanical CAD on the horizon
  • From: Dan McMahill
• Re: gEDA-user: Making circles in PCB
  • From: Dan McMahill
• Re: gEDA-user: right-mouse-click rotate
  • From: Dan McMahill
• Re: gEDA-user: test for DNS
  • From: Dave McGuire
• Re: gEDA-user: OT: Latex
  • From: Dave McGuire
• Re: gEDA-user: OT: Latex
  • From: Dave McGuire
• Re: gEDA-user: OT: Latex
  • From: Dave McGuire
• Re: gEDA-user: TL431
  • From: Dave McGuire
• Re: gEDA-user: I am such a troll for posting to slashdot
  • From: Dave McGuire
• Re: gEDA-user: gedasymbols.org down
  • From: Dave McGuire
• Re: gEDA-user: gedasymbols.org down
  • From: Dave McGuire
• Re: gEDA-user: gEDA/gaf Mac OSX screenshots?
  • From: Dave McGuire
• Re: gEDA-user: gEDA/gaf Mac OSX screenshots?
  • From: Dave McGuire
• Re: gEDA-user: Native Mac OS X?
  • From: Dave McGuire
• Re: gEDA-user: Confusion about symbol file and footprint file
  • From: Dave N6NZ
• Re: gEDA-user: new components
  • From: Dave N6NZ
• gEDA-user: pcb: All v. Any pin connectivity (was: Taking advantage of internally connected pins)
  • From: Dave N6NZ
• Re: gEDA-user: pcb: All v. Any pin connectivity (was: Taking advantage of internally connected pins)
  • From: Dave N6NZ
• Re: gEDA-user: pcb: All v. Any pin connectivity
  • From: Dave N6NZ
• Re: gEDA-user: pcb: All v. Any pin connectivity (was: Taking advantage of internally connected pins)
  • From: Dave N6NZ
• gEDA-user: close tracks leaving copper remnant in polygon
  • From: Dave N6NZ
• Re: gEDA-user: close tracks leaving copper remnant in polygon
  • From: Dave N6NZ
• Re: gEDA-user: Problem With Macports Install
  • From: Dave N6NZ
• Re: gEDA-user: Is it possible to do square holes in PCB?
  • From: Dave N6NZ
• gEDA-user: Eagle to gEDA conversion path??
  • From: Dave N6NZ
• Re: gEDA-user: Eagle to gEDA conversion path??
  • From: Dave N6NZ
• Re: gEDA-user: Eagle to gEDA conversion path??
  • From: Dave N6NZ
• Re: gEDA-user: Open Source mechanical CAD on the horizon
  • From: Dave N6NZ
• Re: gEDA-user: Open Source mechanical CAD on the horizon
  • From: Dave N6NZ
• Re: gEDA-user: Making circles in PCB
  • From: Dave N6NZ
• Re: gEDA-user: Making circles in PCB
  • From: Dave N6NZ
• Re: gEDA-user: I am such a troll for posting to slashdot
  • From: Dave N6NZ
• Re: gEDA-user: Native Mac OS X?
  • From: Dave N6NZ
• Re: gEDA-user: Native Mac OS X?
  • From: Dave N6NZ
• gEDA-user: Seeking Xicon 42IF footprint
  • From: David Griffith
• gEDA-user: pcb quick reference doesn't seem correct
  • From: David Griffith
• Re: gEDA-user: Seeking Xicon 42IF footprint
  • From: David Griffith
• Re: gEDA-user: Seeking Xicon 42IF footprint
  • From: David Griffith
• Re: gEDA-user: Seeking Xicon 42IF footprint
  • From: David Griffith
• gEDA-user: enlarging holes
  • From: David Griffith
• Re: gEDA-user: enlarging holes
  • From: David Griffith
• Re: gEDA-user: enlarging holes
  • From: David Griffith
• Re: gEDA-user: enlarging holes
  • From: David Griffith
• Re: gEDA-user: any last minute advice prior to sending out for PCB fab
  • From: David SMITH
• Re: gEDA-user: Making circles in PCB
  • From: Denis Grelich
• Re: gEDA-user: I am such a troll for posting to slashdot
  • From: Denis Grelich
• Re: gEDA-user: I am such a troll for posting to slashdot
  • From: Denis Grelich
• Re: gEDA-user: PCB LF patch: single "foward annotate" sch->pcb button
  • From: DJ Delorie
• Re: gEDA-user: new components
  • From: DJ Delorie
• Re: gEDA-user: new components
  • From: DJ Delorie
• Re: gEDA-user: more kvetch re: pcb Arcs
  • From: DJ Delorie
• Re: gEDA-user: Can't Autoroute rats to TSSOP48
  • From: DJ Delorie
• Re: gEDA-user: new components
  • From: DJ Delorie
• Re: gEDA-user: pcb action to set refdes?
  • From: DJ Delorie
• Re: gEDA-user: pcb action to set refdes?
  • From: DJ Delorie
• Re: gEDA-user: pcb action to set refdes?
  • From: DJ Delorie
• Re: gEDA-user: why separate xgsch2pcb?
  • From: DJ Delorie
• Re: gEDA-user: Where do I put footprints?
  • From: DJ Delorie
• Re: gEDA-user: why separate xgsch2pcb?
  • From: DJ Delorie
• Re: gEDA-user: Where do I put footprints?
  • From: DJ Delorie
• Re: gEDA-user: why separate xgsch2pcb?
  • From: DJ Delorie
• Re: gEDA-user: why separate xgsch2pcb?
  • From: DJ Delorie
• Re: gEDA-user: how to make DRC ignore "outline" layer?
  • From: DJ Delorie
• Re: gEDA-user: why separate xgsch2pcb?
  • From: DJ Delorie
• Re: gEDA-user: why separate xgsch2pcb?
  • From: DJ Delorie
• Re: gEDA-user: why separate xgsch2pcb?
  • From: DJ Delorie
• Re: gEDA-user: why separate xgsch2pcb?
  • From: DJ Delorie
• Re: gEDA-user: why separate xgsch2pcb?
  • From: DJ Delorie
• Re: gEDA-user: Action to flip board
  • From: DJ Delorie
• Re: gEDA-user: why separate xgsch2pcb?
  • From: DJ Delorie
• Re: gEDA-user: why separate xgsch2pcb?
  • From: DJ Delorie
• Re: gEDA-user: Action to flip board
  • From: DJ Delorie
• Re: gEDA-user: why separate xgsch2pcb?
  • From: DJ Delorie
• Re: gEDA-user: enlarging holes
  • From: DJ Delorie
• gEDA-user: FIRST robotics...
  • From: DJ Delorie
• Re: gEDA-user: FIRST robotics...
  • From: DJ Delorie
• Re: gEDA-user: FIRST robotics...
  • From: DJ Delorie
• Re: gEDA-user: right-mouse-click rotate
  • From: DJ Delorie
• Re: gEDA-user: any last minute advice prior to sending out for PCB fab
  • From: DJ Delorie
• Re: gEDA-user: any last minute advice prior to sending out for PCB fab
  • From: DJ Delorie
• Re: gEDA-user: Changing the author name on the fabrication drawings
  • From: DJ Delorie
• Re: gEDA-user: Making circles in PCB
  • From: DJ Delorie
• Re: gEDA-user: Making circles in PCB
  • From: DJ Delorie
• Re: gEDA-user: Part (and net) identifying tooltips for PCB
  • From: DJ Delorie
• Re: gEDA-user: Making circles in PCB
  • From: DJ Delorie
• Re: gEDA-user: Making circles in PCB
  • From: DJ Delorie
• Re: gEDA-user: gedasymbols.org down
  • From: DJ Delorie
• Re: gEDA-user: gedasymbols.org down
  • From: DJ Delorie
• Re: gEDA-user: gedasymbols.org down
  • From: DJ Delorie
• Re: gEDA-user: I am such a troll for posting to slashdot
  • From: DJ Delorie
• gEDA-user: TO-92 Best Practices
  • From: Donald Tillman
• Re: gEDA-user: gschem font scaling
  • From: Duncan Drennan
• Re: gEDA-user: GUI + make project manager (was:why separate xgsch2pcb?)
  • From: Duncan Drennan
• Re: gEDA-user: Is it possible to do square holes in PCB?
  • From: Duncan Drennan
• gEDA-user: gschem text line spacing in postscript
  • From: Duncan Drennan
• Re: gEDA-user: gschem text line spacing in postscript
  • From: Duncan Drennan
• Re: gEDA-user: gschem text line spacing in postscript
  • From: Duncan Drennan
• Re: gEDA-user: pcb preferences line incr.
  • From: Duncan Drennan
• Re: gEDA-user: I am such a troll for posting to slashdot
  • From: Duncan Drennan
• Re: gEDA-user: I am such a troll for posting to slashdot
  • From: Eric Brombaugh
• Re: gEDA-user: more kvetch re: pcb Arcs
  • From: Ethan Swint
• Re: gEDA-user: pcb: All v. Any pin connectivity
  • From: Ethan Swint
• gEDA-user: Toporouter update?
  • From: Ethan Swint
• Re: gEDA-user: Toporouter update?
  • From: Ethan Swint
• gEDA-user: PCB Solder Tabs
  • From: evan foss
• Re: gEDA-user: Open Source mechanical CAD on the horizon
  • From: evan foss
• gEDA-user: --enable-cluster option.
  • From: Facundo Ferrer
• gEDA-user: --enable-cluster option.
  • From: Facundo Ferrer
• Re: gEDA-user: --enable-cluster option.
  • From: Facundo Ferrer
• gEDA-user: gEDA user: gnetlist -gdrc buffer overflow and gnetlist -gspice-sdb killed
  • From: Facundo Ferrer
• Re: gEDA-user: Translations for gEDA 1.6.1....
  • From: Florian Teply
• Re: gEDA-user: Translations for gEDA 1.6.1....
  • From: Florian Teply
• Re: gEDA-user: PCB LF patch: single "foward annotate" sch->pcb button
  • From: Frank Bergmann
• Re: gEDA-user: PCB LF patch: single "foward annotate" sch->pcb button
  • From: Frank Bergmann
• Re: gEDA-user: Message and Library windows
  • From: Frank Bergmann
• Re: gEDA-user: any last minute advice prior to sending out for PCB fab
  • From: Frank Bergmann
• Re: gEDA-user: OT: Search for good SMD and IC prober
  • From: Gabriel Paubert
• Re: gEDA-user: OT: Latex
  • From: Gabriel Paubert
• Re: gEDA-user: OT: Latex
  • From: Gabriel Paubert
• Re: gEDA-user: How do I get the router to go where I want it to?
  • From: Gabriel Paubert
• gEDA-user: OT: Latex
  • From: gene glick
• Re: gEDA-user: OT: Latex
  • From: gene glick
• gEDA-user: pcb join pad to polygon
  • From: gene glick
• Re: gEDA-user: pcb join pad to polygon
  • From: gene glick
• Re: gEDA-user: pcb join pad to polygon
  • From: gene glick
• Re: gEDA-user: pcb join pad to polygon
  • From: gene glick
• Re: gEDA-user: OT: Latex
  • From: gene glick
• Re: gEDA-user: OT: Latex
  • From: gene glick
• Re: gEDA-user: PCB Prototype houses that do 0.031" boards?
  • From: gene glick
• gEDA-user: TL431
  • From: gene glick
• Re: gEDA-user: TL431
  • From: gene glick
• Re: gEDA-user: TL431
  • From: gene glick
• Re: gEDA-user: TL431
  • From: gene glick
• Re: gEDA-user: TL431
  • From: gene glick
• Re: gEDA-user: Message and Library windows
  • From: gene glick
• gEDA-user: any last minute advice prior to sending out for PCB fab
  • From: gene glick
• Re: gEDA-user: any last minute advice prior to sending out for PCB fab
  • From: gene glick
• Re: gEDA-user: any last minute advice prior to sending out for PCB fab
  • From: gene glick
• Re: gEDA-user: any last minute advice prior to sending out for PCB fab
  • From: gene glick
• Re: gEDA-user: gEDA user: gnetlist -gdrc buffer overflow and gnetlist -gspice-sdb killed
  • From: gene glick
• gEDA-user: gschem status window opens full screen
  • From: gene glick
• Re: gEDA-user: gschem status window opens full screen
  • From: gene glick
• Re: gEDA-user: FIRST robotics...
  • From: Gene Heskett
• Re: gEDA-user: FIRST robotics...
  • From: Gene Heskett
• Re: gEDA-user: gedasymbols.org down
  • From: Gene Heskett
• Re: gEDA-user: let's play "guess the netlist" with gsch2pcb!
  • From: Geoff Swan
• Re: gEDA-user: let's play "guess the netlist" with gsch2pcb!
  • From: Geoff Swan
• Re: gEDA-user: analog/code co-simulation and schematics and netlists for silicon
  • From: Geoff Swan
• Re: gEDA-user: any last minute advice prior to sending out for PCB fab
  • From: Geoff Swan
• Re: gEDA-user: Open Source mechanical CAD on the horizon
  • From: Girvin R. Herr
• Re: gEDA-user: gedasymbols.org down
  • From: Greg Cunningham
• Re: gEDA-user: gedasymbols.org down
  • From: Greg Cunningham
• Re: gEDA-user: can't route to TSSOP
  • From: Harry Eaton
• gEDA-user: PCB GIT: missing members in SettingType
  • From: Ineiev
• Re: gEDA-user: Making circles in PCB
  • From: Ineiev
• Re: gEDA-user: OT: Latex
  • From: Jared Casper
• Re: gEDA-user: why separate xgsch2pcb?
  • From: Jared Casper
• Re: gEDA-user: PCB plugin for contoured traces?
  • From: Jared Casper
• Re: gEDA-user: Changing key bindings in PCB
  • From: Jared Casper
• Re: gEDA-user: Message and Library windows
  • From: Jared Casper
• Re: gEDA-user: little slivers from pours
  • From: Jared Casper
• Re: gEDA-user: Message and Library windows
  • From: Jared Casper
• Re: gEDA-user: Message and Library windows
  • From: Jared Casper
• Re: gEDA-user: why separate xgsch2pcb?
  • From: Jason
• Re: gEDA-user: why separate xgsch2pcb?
  • From: Jason
• Re: gEDA-user: why separate xgsch2pcb?
  • From: Jason
• Re: gEDA-user: why separate xgsch2pcb?
  • From: Jason
• Re: gEDA-user: PCB Prototype houses that do 0.031" boards?
  • From: Jason
• Re: gEDA-user: PCB Prototype houses that do 0.031" boards?
  • From: Jason
• gEDA-user: Where do I put footprints?
  • From: Jim
• Re: gEDA-user: Where do I put footprints?
  • From: Jim
• gEDA-user: How do I get the router to go where I want it to?
  • From: Jim Lynch
• gEDA-user: Is there a way to get a footprint to place copper on both sides?
  • From: Jim Lynch
• Re: gEDA-user: Is there a way to get a footprint to place copper on both sides?
  • From: Jim Lynch
• Re: gEDA-user: I am such a troll for posting to slashdot
  • From: Jim Lynch
• Re: gEDA-user: Confusion about symbol file and footprint file
  • From: John Doty
• Re: gEDA-user: --enable-cluster option.
  • From: John Doty
• Re: gEDA-user: OT: Search for good SMD and IC prober
  • From: John Doty
• Re: gEDA-user: OT: Latex
  • From: John Doty
• Re: gEDA-user: OT: Latex
  • From: John Doty
• Re: gEDA-user: OT: Latex
  • From: John Doty
• Re: gEDA-user: OT: Latex
  • From: John Doty
• Re: gEDA-user: why separate xgsch2pcb?
  • From: John Doty
• Re: gEDA-user: why separate xgsch2pcb?
  • From: John Doty
• Re: gEDA-user: why separate xgsch2pcb?
  • From: John Doty
• Re: gEDA-user: let's play "guess the netlist" with gsch2pcb!
  • From: John Doty
• Re: gEDA-user: gEDA user: gnetlist -gdrc buffer overflow and gnetlist -gspice-sdb killed
  • From: John Doty
• Re: gEDA-user: gEDA user: gnetlist -gdrc buffer overflow and gnetlist -gspice-sdb killed
  • From: John Doty
• Re: gEDA-user: new components
  • From: John Griessen
• Re: gEDA-user: new components
  • From: John Griessen
• Re: gEDA-user: OT: Search for good SMD and IC prober
  • From: John Griessen
• Re: gEDA-user: new components
  • From: John Griessen
• gEDA-user: panelizing
  • From: John Griessen
• Re: gEDA-user: why separate xgsch2pcb?
  • From: John Griessen
• Re: gEDA-user: Where do I put footprints?
  • From: John Griessen
• Re: gEDA-user: Where do I put footprints?
  • From: John Griessen
• gEDA-user: GUI + make project manager (was:why separate xgsch2pcb?)
  • From: John Griessen
• Re: gEDA-user: why separate xgsch2pcb?
  • From: John Griessen
• Re: gEDA-user: why separate xgsch2pcb?
  • From: John Griessen
• Re: gEDA-user: why separate xgsch2pcb?
  • From: John Griessen
• Re: gEDA-user: GUI + make project manager
  • From: John Griessen
• gEDA-user: analog/code co-simulation and schematics and netlists for silicon
  • From: John Griessen
• Re: gEDA-user: analog/code co-simulation and schematics and netlists for silicon
  • From: John Griessen
• Re: gEDA-user: analog/code co-simulation and schematics and netlists for silicon
  • From: John Griessen
• Re: gEDA-user: any last minute advice prior to sending out for PCB fab
  • From: John Griessen
• Re: gEDA-user: gedasymbols.org down
  • From: John Griessen
• Re: gEDA-user: gedasymbols.org down
  • From: John Griessen
• gEDA-user: gedasymbols.org
  • From: John Griessen
• Re: gEDA-user: gedasymbols.org
  • From: John Griessen
• Re: gEDA-user: gedasymbols.org
  • From: John Griessen
• Re: gEDA-user: gedasymbols.org down
  • From: John Griessen
• Re: gEDA-user: gedasymbols.org down
  • From: John Griessen
• Re: gEDA-user: gedasymbols.org down
  • From: John Griessen
• Re: gEDA-user: gedasymbols.org DNS was down
  • From: John Griessen
• Re: gEDA-user: OT: Latex
  • From: John Luciani
• Re: gEDA-user: OT: Latex
  • From: John Luciani
• Re: gEDA-user: Seeking Xicon 42IF footprint
  • From: John Luciani
• Re: gEDA-user: Seeking Xicon 42IF footprint
  • From: John Luciani
• Re: gEDA-user: PCB Prototype houses that do 0.031" boards?
  • From: John Luciani
• Re: gEDA-user: any last minute advice prior to sending out for PCB fab
  • From: John Luciani
• Re: gEDA-user: any last minute advice prior to sending out for PCB fab
  • From: John Luciani
• Re: gEDA-user: I am such a troll for posting to slashdot
  • From: John Luciani
• Re: gEDA-user: I am such a troll for posting to slashdot
  • From: John Luciani
• Re: gEDA-user: TO-92 Best Practices
  • From: John Luciani
• gEDA-user: Hurray for GUI!
  • From: John P. Doty
• Re: gEDA-user: why separate xgsch2pcb?
  • From: John P. Doty
• Re: gEDA-user: why separate xgsch2pcb?
  • From: John P. Doty
• Re: gEDA-user: gerbv export to png
  • From: Julian
• Re: gEDA-user: OT: Latex
  • From: Kai-Martin Knaak
• Re: gEDA-user: OT: Latex
  • From: Kai-Martin Knaak
• Re: gEDA-user: OT: Latex
  • From: Kai-Martin Knaak
• Re: gEDA-user: OT: Latex
  • From: Kai-Martin Knaak
• gEDA-user: right-mouse-click rotate
  • From: Kai-Martin Knaak
• Re: gEDA-user: right-mouse-click rotate
  • From: Kai-Martin Knaak
• Re: gEDA-user: Is there a way to get a footprint to place copper on both sides?
  • From: Kai-Martin Knaak
• Re: gEDA-user: TL431
  • From: Kai-Martin Knaak
• Re: gEDA-user: Toporouter update?
  • From: Kai-Martin Knaak
• Re: gEDA-user: Eagle to gEDA conversion path??
  • From: Kai-Martin Knaak
• Re: gEDA-user: Message and Library windows
  • From: Kai-Martin Knaak
• Re: gEDA-user: any last minute advice prior to sending out for PCB fab
  • From: Kai-Martin Knaak
• gEDA-user: Open Source mechanical CAD on the horizon
  • From: Kai-Martin Knaak
• Re: gEDA-user: Message and Library windows
  • From: Kai-Martin Knaak
• Re: gEDA-user: Open Source mechanical CAD on the horizon
  • From: Kai-Martin Knaak
• Re: gEDA-user: Open Source mechanical CAD on the horizon
  • From: Kai-Martin Knaak
• Re: gEDA-user: Part (and net) identifying tooltips for PCB
  • From: Kai-Martin Knaak
• Re: gEDA-user: Open Source mechanical CAD on the horizon
  • From: Kai-Martin Knaak
• gEDA-user: gedasymbols.org down
  • From: Kai-Martin Knaak
• Re: gEDA-user: gedasymbols.org down
  • From: Kai-Martin Knaak
• Re: gEDA-user: OT: Latex
  • From: Krzysztof KoÅciuszkiewicz
• Re: gEDA-user: Getting new linux, which distribution? (Andy Fierman)
  • From: KURT PETERS
• Re: gEDA-user: Getting new linux, which distribution?
  • From: Larry Battraw
• gEDA-user: PCB plugin for contoured traces?
  • From: Larry Battraw
• gEDA-user: Changing key bindings in PCB
  • From: Larry Battraw
• Re: gEDA-user: Changing key bindings in PCB
  • From: Larry Battraw
• Re: gEDA-user: topo router for PCB
  • From: Larry Battraw
• Re: gEDA-user: Toporouter update?
  • From: Larry Battraw
• Re: gEDA-user: OT: Latex
  • From: Larry Doolittle
• Re: gEDA-user: any last minute advice prior to sending out for PCB fab
  • From: Larry Doolittle
• Re: gEDA-user: I am such a troll for posting to slashdot
  • From: Larry Doolittle
• gEDA-user: Confusion about symbol file and footprint file
  • From: Luke
• gEDA-user: Solder mask clearances for SMD devices
  • From: Luke
• Re: gEDA-user: How do I get the router to go where I want it to?
  • From: Maciej Pijanka
• Re: gEDA-user: Native Mac OS X?
  • From: Mark Anderson
• Re: gEDA-user: Native Mac OS X?
  • From: Mark Anderson
• gEDA-user: more kvetch re: pcb Arcs
  • From: Mark Rages
• Re: gEDA-user: new components
  • From: Mark Rages
• Re: gEDA-user: new components
  • From: Mark Rages
• Re: gEDA-user: new components
  • From: Mark Rages
• Re: gEDA-user: more kvetch re: pcb Arcs
  • From: Mark Rages
• Re: gEDA-user: more kvetch re: pcb Arcs
  • From: Mark Rages
• Re: gEDA-user: more kvetch re: pcb Arcs
  • From: Mark Rages
• gEDA-user: pcb action to set refdes?
  • From: Mark Rages
• Re: gEDA-user: pcb action to set refdes?
  • From: Mark Rages
• Re: gEDA-user: pcb action to set refdes?
  • From: Mark Rages
• Re: gEDA-user: pcb action to set refdes?
  • From: Mark Rages
• gEDA-user: what does "Error while clipping PBO_SUB: 3" mean?
  • From: Mark Rages
• Re: gEDA-user: what does "Error while clipping PBO_SUB: 3" mean?
  • From: Mark Rages
• Re: gEDA-user: what does "Error while clipping PBO_SUB: 3" mean?
  • From: Mark Rages
• gEDA-user: how to make DRC ignore "outline" layer?
  • From: Mark Rages
• Re: gEDA-user: how to make DRC ignore "outline" layer?
  • From: Mark Rages
• gEDA-user: Action to flip board
  • From: Mark Rages
• Re: gEDA-user: Action to flip board
  • From: Mark Rages
• Re: gEDA-user: Action to flip board
  • From: Mark Rages
• Re: gEDA-user: PCB Prototype houses that do 0.031" boards?
  • From: Mark Rages
• gEDA-user: let's play "guess the netlist" with gsch2pcb!
  • From: Mark Rages
• Re: gEDA-user: let's play "guess the netlist" with gsch2pcb!
  • From: Mark Rages
• Re: gEDA-user: let's play "guess the netlist" with gsch2pcb!
  • From: Mark Rages
• Re: gEDA-user: let's play "guess the netlist" with gsch2pcb!
  • From: Mark Rages
• Re: gEDA-user: let's play "guess the netlist" with gsch2pcb!
  • From: Mark Rages
• Re: gEDA-user: let's play "guess the netlist" with gsch2pcb!
  • From: Mark Rages
• Re: gEDA-user: PCB plugin for contoured traces?
  • From: Mark Rages
• Re: gEDA-user: Is it possible to do square holes in PCB?
  • From: Mark Rages
• Re: gEDA-user: any last minute advice prior to sending out for PCB fab
  • From: Mark Rages
• Re: gEDA-user: why separate xgsch2pcb?
  • From: Mark Stanley
• gEDA-user: I'm offering a new version for vbpp
  • From: Martin d Anjou
• gEDA-user: how to push/commit a new vbpp to geda?
  • From: Martin d Anjou
• Re: gEDA-user: how to push/commit a new vbpp to geda?
  • From: Martin d Anjou
• Re: gEDA-user: offering a new release of vbpp
  • From: Martin d Anjou
• Re: gEDA-user: sd-card connector sym and fp needed
  • From: Michael Kamper
• Re: gEDA-user: more kvetch re: pcb Arcs
  • From: Michael Sokolov
• Re: gEDA-user: FIRST robotics...
  • From: Mike Bushroe
• gEDA-user: Making circles in PCB
  • From: Mike Bushroe
• Re: gEDA-user: new components
  • From: Mike Crowe
• Re: gEDA-user: Is it possible to do square holes in PCB?
  • From: myken
• Re: gEDA-user: which linux distribution
  • From: Ouabache Designworks
• Re: gEDA-user: any last minute advice prior to sending out for PCB fab
  • From: Ouabache Designworks
• Re: gEDA-user: gschem font scaling
  • From: Peter Clifton
• Re: gEDA-user: Confusion about symbol file and footprint file
  • From: Peter Clifton
• Re: gEDA-user: more kvetch re: pcb Arcs
  • From: Peter Clifton
• Re: gEDA-user: new components
  • From: Peter Clifton
• Re: gEDA-user: more kvetch re: pcb Arcs
  • From: Peter Clifton
• Re: gEDA-user: more kvetch re: pcb Arcs
  • From: Peter Clifton
• Re: gEDA-user: new components
  • From: Peter Clifton
• Re: gEDA-user: new components
  • From: Peter Clifton
• Re: gEDA-user: new components
  • From: Peter Clifton
• Re: gEDA-user: more kvetch re: pcb Arcs
  • From: Peter Clifton
• Re: gEDA-user: pcb: All v. Any pin connectivity (was: Taking advantage of internally connected pins)
  • From: Peter Clifton
• Re: gEDA-user: OT: Latex
  • From: Peter Clifton
• gEDA-user: Translations for gEDA 1.6.1....
  • From: Peter Clifton
• Re: gEDA-user: Translations for gEDA 1.6.1....
  • From: Peter Clifton
• Re: gEDA-user: Translations for gEDA 1.6.1....
  • From: Peter Clifton
• Re: gEDA-user: Translations for gEDA 1.6.1....
  • From: Peter Clifton
• Re: gEDA-user: pcb join pad to polygon
  • From: Peter Clifton
• Re: gEDA-user: pcb join pad to polygon
  • From: Peter Clifton
• Re: gEDA-user: OT: Latex
  • From: Peter Clifton
• Re: gEDA-user: OT: Latex
  • From: Peter Clifton
• Re: gEDA-user: OT: Latex
  • From: Peter Clifton
• gEDA-user: manpages [WAS: Re: OT: Latex]
  • From: Peter Clifton
• Re: gEDA-user: Translations for gEDA 1.6.1....
  • From: Peter Clifton
• Re: gEDA-user: pcb action to set refdes?
  • From: Peter Clifton
• Re: gEDA-user: why separate xgsch2pcb?
  • From: Peter Clifton
• Re: gEDA-user: why separate xgsch2pcb?
  • From: Peter Clifton
• Re: gEDA-user: why separate xgsch2pcb?
  • From: Peter Clifton
• Re: gEDA-user: why separate xgsch2pcb?
  • From: Peter Clifton
• Re: gEDA-user: why separate xgsch2pcb?
  • From: Peter Clifton
• Re: gEDA-user: why separate xgsch2pcb?
  • From: Peter Clifton
• Re: gEDA-user: what does "Error while clipping PBO_SUB: 3" mean?
  • From: Peter Clifton
• Re: gEDA-user: what does "Error while clipping PBO_SUB: 3" mean?
  • From: Peter Clifton
• Re: gEDA-user: OT: Latex
  • From: Peter Clifton
• Re: gEDA-user: what does "Error while clipping PBO_SUB: 3" mean?
  • From: Peter Clifton
• Re: gEDA-user: gEDA-announce: Please update your translations for gEDA/gaf in prep for a release
  • From: Peter Clifton
• Re: gEDA-user: why separate xgsch2pcb?
  • From: Peter Clifton
• Re: gEDA-user: what does "Error while clipping PBO_SUB: 3" mean?
  • From: Peter Clifton
• Re: gEDA-user: Translations for gEDA 1.6.1....
  • From: Peter Clifton
• Re: gEDA-user: Translations for gEDA 1.6.1....
  • From: Peter Clifton
• Re: gEDA-user: what does "Error while clipping PBO_SUB: 3" mean?
  • From: Peter Clifton
• Re: gEDA-user: why separate xgsch2pcb?
  • From: Peter Clifton
• Re: gEDA-user: GUI + make project manager (was:why separate xgsch2pcb?)
  • From: Peter Clifton
• Re: gEDA-user: how to make DRC ignore "outline" layer?
  • From: Peter Clifton
• Re: gEDA-user: how to make DRC ignore "outline" layer?
  • From: Peter Clifton
• Re: gEDA-user: Translations for gEDA 1.6.1.... (ROOT MENU ACCELERATORS)
  • From: Peter Clifton
• Re: gEDA-user: how to make DRC ignore "outline" layer?
  • From: Peter Clifton
• Re: gEDA-user: why separate xgsch2pcb?
  • From: Peter Clifton
• Re: gEDA-user: Translations for gEDA 1.6.1.... (ROOT MENU ACCELERATORS)
  • From: Peter Clifton
• Re: gEDA-user: why separate xgsch2pcb?
  • From: Peter Clifton
• Re: gEDA-user: why separate xgsch2pcb?
  • From: Peter Clifton
• Re: gEDA-user: Problem With Macports Install
  • From: Peter Clifton
• Re: gEDA-user: Problem With Macports Install
  • From: Peter Clifton
• Re: gEDA-user: PCB GIT: missing members in SettingType
  • From: Peter Clifton
• Re: gEDA-user: right-mouse-click rotate
  • From: Peter Clifton
• Re: gEDA-user: let's play "guess the netlist" with gsch2pcb!
  • From: Peter Clifton
• Re: gEDA-user: let's play "guess the netlist" with gsch2pcb!
  • From: Peter Clifton
• Re: gEDA-user: Schematic import (was "why separate xgsch2pcb?")
  • From: Peter Clifton
• Re: gEDA-user: Schematic import (was "why separate xgsch2pcb?")
  • From: Peter Clifton
• Re: gEDA-user: Message and Library windows
  • From: Peter Clifton
• Re: gEDA-user: gschem text line spacing in postscript
  • From: Peter Clifton
• Re: gEDA-user: gschem text line spacing in postscript
  • From: Peter Clifton
• Re: gEDA-user: gschem text line spacing in postscript
  • From: Peter Clifton
• Re: gEDA-user: analog/code co-simulation and schematics and netlists for silicon
  • From: Peter Clifton
• Re: gEDA-user: gschem text line spacing in postscript
  • From: Peter Clifton
• Re: gEDA-user: Message and Library windows
  • From: Peter Clifton
• Re: gEDA-user: Schematic import (was "why separate xgsch2pcb?")
  • From: Peter Clifton
• Re: gEDA-user: Message and Library windows
  • From: Peter Clifton
• Re: gEDA-user: Message and Library windows
  • From: Peter Clifton
• Re: gEDA-user: General Question on gschem
  • From: Peter Clifton
• gEDA-user: Part (and net) identifying tooltips for PCB
  • From: Peter Clifton
• Re: gEDA-user: Open Source mechanical CAD on the horizon
  • From: Peter Clifton
• Re: gEDA-user: Part (and net) identifying tooltips for PCB
  • From: Peter Clifton
• Re: gEDA-user: Part (and net) identifying tooltips for PCB
  • From: Peter Clifton
• Re: gEDA-user: Open Source mechanical CAD on the horizon
  • From: Peter Clifton
• Re: gEDA-user: Part (and net) identifying tooltips for PCB
  • From: Peter Clifton
• Re: gEDA-user: Making circles in PCB
  • From: Peter Clifton
• Re: gEDA-user: Preparing gEDA 1.6.1 for Gentoo
  • From: Peter Clifton
• Re: gEDA-user: right-mouse-click rotate
  • From: Peter Clifton
• Re: gEDA-user: I am such a troll for posting to slashdot
  • From: Peter Clifton
• Re: gEDA-user: I am such a troll for posting to slashdot
  • From: Peter Clifton
• Re: gEDA-user: I am such a troll for posting to slashdot
  • From: Peter Clifton
• Re: gEDA-user: I am such a troll for posting to slashdot
  • From: Peter Clifton
• Re: gEDA-user: gEDA/gaf Mac OSX screenshots?
  • From: Peter Clifton
• Re: gEDA-user: gEDA/gaf Mac OSX screenshots?
  • From: Peter Clifton
• gEDA-user: Native Mac OS X?
  • From: Peter Clifton
• Re: gEDA-user: gEDA/gaf Mac OSX screenshots?
  • From: Peter Clifton
• Re: gEDA-user: Native Mac OS X?
  • From: Peter Clifton
• Re: gEDA-user: gEDA/gaf Mac OSX screenshots?
  • From: Peter Clifton
• Re: gEDA-user: Native Mac OS X?
  • From: Peter Clifton
• Re: gEDA-user: gedasymbols.org down
  • From: Peter Clifton
• Re: gEDA-user: gschem status window opens full screen
  • From: Peter Clifton
• Re: gEDA-user: Native Mac OS X?
  • From: Peter Clifton
• Re: gEDA-user: OT: Latex
  • From: Peter TB Brett
• Re: gEDA-user: OT: Latex
  • From: Peter TB Brett
• Re: gEDA-user: enlarging holes
  • From: Peter TB Brett
• Re: gEDA-user: let's play "guess the netlist" with gsch2pcb!
  • From: Peter TB Brett
• Re: gEDA-user: let's play "guess the netlist" with gsch2pcb!
  • From: Peter TB Brett
• Re: gEDA-user: let's play "guess the netlist" with gsch2pcb!
  • From: Peter TB Brett
• Re: gEDA-user: let's play "guess the netlist" with gsch2pcb!
  • From: Peter TB Brett
• Re: gEDA-user: gschem text line spacing in postscript
  • From: Peter TB Brett
• Re: gEDA-user: desktop-i18n in gEDA
  • From: Peter TB Brett
• Re: gEDA-user: Message and Library windows
  • From: Peter TB Brett
• Re: gEDA-user: General Question on gschem
  • From: Peter TB Brett
• Re: gEDA-user: TL431
  • From: phil
• Re: gEDA-user: new components
  • From: research@xxxxxxxxxxxxxx
• gEDA-user: test for DNS
  • From: Richard de Rivaz
• gEDA-user: Getting new linux, which distribution?
  • From: Rob Butts
• Re: gEDA-user: Getting new linux, which distribution?
  • From: Rob Butts
• gEDA-user: Can't Autoroute rats to TSSOP48
  • From: Stan Katz
• Re: gEDA-user: new components
  • From: Stefan Salewski
• Re: gEDA-user: Solder mask clearances for SMD devices
  • From: Stefan Salewski
• Re: gEDA-user: OT: Latex
  • From: Stefan Salewski
• Re: gEDA-user: OT: Latex
  • From: Stefan Salewski
• Re: gEDA-user: OT: Latex
  • From: Stefan Salewski
• Re: gEDA-user: enlarging holes
  • From: Stefan Salewski
• Re: gEDA-user: enlarging holes
  • From: Stefan Salewski
• gEDA-user: Plans for a new PCB snapshot?
  • From: Stefan Salewski
• gEDA-user: Preparing gEDA 1.6.1 for Gentoo
  • From: Stefan Salewski
• Re: gEDA-user: Getting new linux, which distribution?
  • From: Stefan Salewski
• Re: gEDA-user: Getting new linux, which distribution?
  • From: Stefan Salewski
• Re: gEDA-user: Making circles in PCB
  • From: Stefan Salewski
• Re: gEDA-user: Making circles in PCB
  • From: Stefan Salewski
• Re: gEDA-user: Making circles in PCB
  • From: Stefan Salewski
• Re: gEDA-user: gEDA/gaf Mac OSX screenshots?
  • From: Stefan Salewski
• Re: gEDA-user: Open Source mechanical CAD on the horizon
  • From: Stefan Salewski
• Re: gEDA-user: more kvetch re: pcb Arcs
  • From: Stephan Boettcher
• Re: gEDA-user: OT: Latex
  • From: Stephan Boettcher
• Re: gEDA-user: Translations for gEDA 1.6.1....
  • From: Stephan Boettcher
• Re: gEDA-user: OT: Latex
  • From: Stephan Boettcher
• gEDA-user: gerbv export to png
  • From: Stephan Boettcher
• Re: gEDA-user: gerbv export to png
  • From: Stephan Boettcher
• Re: gEDA-user: gerbv export to png
  • From: Stephan Boettcher
• Re: gEDA-user: Making circles in PCB
  • From: Stephan Boettcher
• gEDA-user: Regression in autorouter and/or trace optimiser from pcb20081128 to pcb20091103 ?
  • From: Stephen Ecob
• Re: gEDA-user: Regression in autorouter and/or trace optimiser from pcb20081128 to pcb20091103 ?
  • From: Stephen Ecob
• Re: gEDA-user: Confusion about symbol file and footprint file
  • From: Steven Michalske
• Re: gEDA-user: OT: Search for good SMD and IC prober
  • From: Steven Michalske
• Re: gEDA-user: OT: Latex
  • From: Steven Michalske
• Re: gEDA-user: let's play "guess the netlist" with gsch2pcb!
  • From: Steven Michalske
• Re: gEDA-user: let's play "guess the netlist" with gsch2pcb!
  • From: Steven Michalske
• Re: gEDA-user: FIRST robotics...
  • From: Steven Michalske
• Re: gEDA-user: Schematic import (was "why separate xgsch2pcb?")
  • From: Steven Michalske
• Re: gEDA-user: any last minute advice prior to sending out for PCB fab
  • From: Steven Michalske
• Re: gEDA-user: any last minute advice prior to sending out for PCB fab
  • From: Steven Michalske
• Re: gEDA-user: any last minute advice prior to sending out for PCB fab
  • From: Steven Michalske
• Re: gEDA-user: more kvetch re: pcb Arcs
  • From: Stuart Brorson
• Re: gEDA-user: Schematic import (was "why separate xgsch2pcb?")
  • From: Stuart Brorson
• Re: gEDA-user: OT: Latex
  • From: Svenn Are Bjerkem
• Re: gEDA-user: why separate xgsch2pcb?
  • From: Svenn Are Bjerkem
• Re: gEDA-user: OT: Search for good SMD and IC prober
  • From: Thomas Weber
• Re: gEDA-user: pcb: All v. Any pin connectivity (was: Taking advantage of internally connected pins)
  • From: timecop
• Re: gEDA-user: pcb: All v. Any pin connectivity
  • From: timecop
• Re: gEDA-user: Translations for gEDA 1.6.1....
  • From: timecop
• Re: gEDA-user: Eagle to gEDA conversion path??
  • From: timecop
• Re: gEDA-user: Eagle to gEDA conversion path??
  • From: timecop
• Re: gEDA-user: Making circles in PCB
  • From: timecop
• Re: gEDA-user: Making circles in PCB
  • From: timecop
• Re: gEDA-user: I am such a troll for posting to slashdot
  • From: timecop
• gEDA-user: Solder Mask Clearances
  • From: Tony Radice
• gEDA-user: General Question on gschem
  • From: Tony Radice
• gEDA-user: OT: Search for good SMD and IC prober
  • From: Torsten Wagner
• Re: gEDA-user: OT: Latex
  • From: Torsten Wagner
• Re: gEDA-user: OT: Search for good SMD and IC prober
  • From: Torsten Wagner
• Re: gEDA-user: pcb: All v. Any pin connectivity
  • From: Vanessa Ezekowitz
• Re: gEDA-user: why separate xgsch2pcb?
  • From: Vanessa Ezekowitz
• Re: gEDA-user: why separate xgsch2pcb?
  • From: Vanessa Ezekowitz
• Re: gEDA-user: why separate xgsch2pcb?
  • From: Vanessa Ezekowitz
• Re: gEDA-user: why separate xgsch2pcb?
  • From: Vanessa Ezekowitz
• Re: gEDA-user: why separate xgsch2pcb?
  • From: Vanessa Ezekowitz
• Re: gEDA-user: why separate xgsch2pcb?
  • From: Vanessa Ezekowitz
• Re: gEDA-user: why separate xgsch2pcb?
  • From: Vanessa Ezekowitz
• Re: gEDA-user: why separate xgsch2pcb?
  • From: Vanessa Ezekowitz
• Re: gEDA-user: why separate xgsch2pcb?
  • From: Vanessa Ezekowitz
• Re: gEDA-user: why separate xgsch2pcb?
  • From: Vanessa Ezekowitz
• Re: gEDA-user: why separate xgsch2pcb?
  • From: Vanessa Ezekowitz
• Re: gEDA-user: Is there a way to get a footprint to place copper on both sides?
  • From: Vanessa Ezekowitz
• Re: gEDA-user: Is there a way to get a footprint to place copper on both sides?
  • From: Vanessa Ezekowitz
• gEDA-user: Schematic import (was "why separate xgsch2pcb?")
  • From: Vanessa Ezekowitz
• Re: gEDA-user: Schematic import (was "why separate xgsch2pcb?")
  • From: Vanessa Ezekowitz
• Re: gEDA-user: Schematic import (was "why separate xgsch2pcb?")
  • From: Vanessa Ezekowitz
• Re: gEDA-user: Schematic import (was "why separate xgsch2pcb?")
  • From: Vanessa Ezekowitz
• gEDA-user: Message and Library windows
  • From: Vanessa Ezekowitz
• Re: gEDA-user: Message and Library windows
  • From: Vanessa Ezekowitz
• Re: gEDA-user: any last minute advice prior to sending out for PCB fab
  • From: Vanessa Ezekowitz
• Re: gEDA-user: Message and Library windows
  • From: Vanessa Ezekowitz
• Re: gEDA-user: Making circles in PCB
  • From: Vanessa Ezekowitz
• gEDA-user: pcb preferences line incr.
  • From: Vincent Onelli
• Re: gEDA-user: PCB Prototype houses that do 0.031" boards?
  • From: Windell H. Oskay
• Re: gEDA-user: gEDA/gaf Mac OSX screenshots?
  • From: Windell H. Oskay
• Re: gEDA-user: gEDA/gaf Mac OSX screenshots?
  • From: Windell H. Oskay