Mail Thread Index
- Re: gEDA-user: powermeter board, with less ground planes :-),
Dave McGuire
- Re: gEDA-user: powermeter board, with less ground planes :-),
Steve Meier
- <Possible follow-ups>
- Re: gEDA-user: powermeter board, with less ground planes :-),
Joerg
- Re: gEDA-user: powermeter board, with less ground planes :-),
Joerg
- Re: gEDA-user: powermeter board, with less ground planes :-),
DJ Delorie
- Re: gEDA-user: powermeter board, with less ground planes :-),
Joerg
- Re: gEDA-user: powermeter board, with less ground planes :-),
DJ Delorie
- Re: gEDA-user: powermeter board, with less ground planes :-),
Joerg
- Re: gEDA-user: powermeter board, with less ground planes :-),
DJ Delorie
- Re: gEDA-user: powermeter board, with less ground planes :-),
Joerg
- Re: gEDA-user: powermeter board, with less ground planes :-),
DJ Delorie
- Re: gEDA-user: powermeter board, with less ground planes :-),
Joerg
- Re: gEDA-user: powermeter board, with less ground planes :-),
DJ Delorie
- Re: gEDA-user: powermeter board, with less ground planes :-),
Steven Michalske
- Re: gEDA-user: powermeter board, with less ground planes :-),
DJ Delorie
- Re: gEDA-user: powermeter board, with less ground planes :-),
Joerg
- Re: gEDA-user: powermeter board, with less ground planes :-),
DJ Delorie
- Re: gEDA-user: powermeter board, with less ground planes :-),
Joerg
- Re: gEDA-user: powermeter board, with less ground planes :-),
DJ Delorie
- Re: gEDA-user: powermeter board, with less ground planes :-),
Joerg
- Re: gEDA-user: powermeter board, with less ground planes :-),
DJ Delorie
- Re: gEDA-user: powermeter board, with less ground planes :-),
Joerg
- Re: gEDA-user: powermeter board, with less ground planes :-),
DJ Delorie
- Re: gEDA-user: powermeter board, with less ground planes :-),
Joerg
- Re: gEDA-user: powermeter board, with less ground planes :-),
David C. Kerber
- Re: gEDA-user: powermeter board, with less ground planes :-),
Joerg
- Re: gEDA-user: powermeter board, with less ground planes :-),
DJ Delorie
- Re: gEDA-user: powermeter board, with less ground planes :-),
Joerg
- Re: gEDA-user: powermeter board, with less ground planes :-),
DJ Delorie
- Re: gEDA-user: powermeter board, with less ground planes :-),
Joerg
- Re: gEDA-user: powermeter board, with less ground planes :-),
Larry Doolittle
- Re: gEDA-user: powermeter board, with less ground planes :-),
John Doty
- Re: gEDA-user: powermeter board, with less ground planes :-),
DJ Delorie
- Re: gEDA-user: powermeter board, with less ground planes :-),
Dave McGuire
- Re: gEDA-user: powermeter board, with less ground planes :-),
Steven Michalske
- Re: gEDA-user: Autonumbering in multi-page schematic,
Duncan Drennan
- gEDA-user: gschem cut/paste?,
Mark Rages
- gEDA-user: DRC2 errors on slotted part,
gdedwards
- gEDA-user: Exporting PS file in PCB,
Rob Butts
- gEDA-user: Problem with gEDA Makefile on ubuntu,
Craig Niederberger
- gEDA-user: OT: OpenOCD?,
John Doty
- gEDA-user: Newbie - no symbols - HELP!,
Dave
- gEDA-user: Photo printing masks for home made pcb,
Rob Butts
- gEDA-user: GerberViewr gerbv,
Joerg
- Re: gEDA-user: GerberViewr gerbv,
DJ Delorie
- Re: gEDA-user: GerberViewr gerbv,
Kai-Martin Knaak
- Re: gEDA-user: GerberViewr gerbv,
Joerg
- Re: gEDA-user: GerberViewr gerbv,
Stuart Brorson
- Re: gEDA-user: GerberViewr gerbv,
Joerg
- Re: gEDA-user: GerberViewr gerbv,
Joerg
- Re: gEDA-user: GerberViewr gerbv,
Ales Hvezda
- Re: gEDA-user: GerberViewr gerbv,
Joerg
- Re: gEDA-user: GerberViewr gerbv,
Stuart Brorson
- Re: gEDA-user: GerberViewr gerbv,
Joerg
- Re: gEDA-user: GerberViewr gerbv,
Steven Michalske
- Re: gEDA-user: GerberViewr gerbv,
Joerg
- Re: gEDA-user: GerberViewr gerbv,
DJ Delorie
- Re: gEDA-user: GerberViewr gerbv,
Joerg
- gEDA-user: pcb component layers,
Duncan Drennan
- Re: gEDA-user: pcb component layers,
DJ Delorie
- Re: gEDA-user: pcb component layers,
Duncan Drennan
- Re: gEDA-user: pcb component layers,
Ales Hvezda
- Re: gEDA-user: pcb component layers,
al davis
- Re: gEDA-user: pcb component layers,
DJ Delorie
- Re: gEDA-user: pcb component layers,
Duncan Drennan
- gEDA-user: Drill guide,
ST de Feber
- Re: gEDA-user: Drill guide,
Stefan Salewski
- Re: gEDA-user: Drill guide,
ST de Feber
- Re: gEDA-user: Drill guide,
Stefan Salewski
- Re: gEDA-user: Drill guide,
ST de Feber
- Re: gEDA-user: Drill guide,
DJ Delorie
- Re: gEDA-user: Drill guide,
ST de Feber
- Re: gEDA-user: Drill guide,
ST de Feber
- Re: gEDA-user: pcb component layers,
Duncan Drennan
- Re: gEDA-user: pcb component layers,
DJ Delorie
- Re: gEDA-user: pcb component layers,
Stephan Boettcher
- Re: gEDA-user: Hiding power pins in schematic symbols?,
Bernd Jendrissek
- gEDA-user: setting radius of an arc?,
Larry Martin
- gEDA-user: footprint,
Patrick Dupre
- gEDA-user: Silkscreen Logo,
Larry Martin
- gEDA-user: Vee and ground connected,
Patrick Dupre
- gEDA-user: 7905.sym,
Patrick Dupre
- gEDA-user: Is there a more detailed gEDA symbol edit turorial?,
Joerg
- gEDA-user: Part Rotation in XY-data,
John Luciani
- gEDA-user: Slotting and visible power connections,
Joerg
- Re: gEDA-user: Slotting and visible power connections,
Mark Rages
- Re: gEDA-user: Slotting and visible power connections,
DJ Delorie
- Re: gEDA-user: Slotting and visible power connections,
Joerg
- Re: gEDA-user: Slotting and visible power connections,
Joerg
- Re: gEDA-user: Slotting and visible power connections,
Stuart Brorson
- Re: gEDA-user: Slotting and visible power connections,
Joerg
- Re: gEDA-user: Slotting and visible power connections,
Stuart Brorson
- Re: gEDA-user: Slotting and visible power connections,
Joerg
- Re: gEDA-user: Slotting and visible power connections,
Stuart Brorson
- Re: gEDA-user: Slotting and visible power connections,
Stefan Salewski
- Re: gEDA-user: Slotting and visible power connections,
Joerg
- Re: gEDA-user: Slotting and visible power connections,
John Doty
- Re: gEDA-user: Slotting and visible power connections,
Bernd Jendrissek
- Re: gEDA-user: Slotting and visible power connections,
Joerg
- Re: gEDA-user: Slotting and visible power connections,
Stephan Boettcher
- gEDA-user: Missing I/O symbol with refdes [pin] in sch. for the symbol [x1],
Rama krishnan
- gEDA-user: footprint too large,
Patrick Dupre
- gEDA-user: via to pad,
Patrick Dupre
- gEDA-user: missing footprints list,
Duncan Drennan
- gEDA-user: DIY thermographic camera?,
Randall Nortman
- Re: gEDA-user: Ground Flooding,
Levente Kovacs
- Re: gEDA-user: Missing I/O symbol with refdes [pin] in sch. for the Re: Missing I/O symbol with refdes [pin] in sch. for the symbol [x1],
Rama krishnan
- gEDA-user: Symbol attributes not in the master attributes list,
fricker
- gEDA-user: final modification,
Patrick Dupre
- gEDA-user: remove copper,
Patrick Dupre
- gEDA-user: From on side to the other one,
Patrick Dupre
- gEDA-user: gschem symbol and PCB footprint for BTM-22x Bluetooth module,
Wojciech Zabolotny
- gEDA-user: Breaking a track into two segments by using a hole,
Simon Clubley
- gEDA-user: Symbol size,
Felix Maier
- gEDA-user: Yesterday's (and Next) Free Dog Meeting at Bear Rock Cafe Reading, MA,
Peter Wiley-Cordone
- Re: gEDA-user: Parsing and writing schematics with Perl,
fricker
- gEDA-user: Contradictory information in documentation,
gdedwards
- gEDA-user: printing problem,
Felix Maier
- Re: gEDA-user: Howto make solder mask extend equal for all pads in layout?,
Stefan Salewski
- gEDA-user: Convert lib from KiCAD,
Raphael Derosso Pereira
- gEDA-user: pcb, Remove Connected Question,
Stefan Salewski
- gEDA-user: Back Annotation,
Kipton Moravec
- gEDA-user: [OT] MIT Museum,
John Luciani
- Re: gEDA-user: External attribute read/write - how?,
fricker
- gEDA-user: pcb forgets default sizes for drill and annular ring,
Duncan Drennan
- gEDA-user: Overline in Gschem?,
Anton Orlichenko
- gEDA-user: installing geda tools on laptop,
vsrk sarma
- gEDA-user: Need a reminder: decoupling caps for TTL logic?,
Peter L. Berghold
- gEDA-user: PCB cause heavy load on X server,
michalwd1979
- gEDA-user: Odd file behavior,
Ethan Swint
- gEDA-user: Why does .subckt comes in top level netlist,
Rama krishnan
- gEDA-user: OT: Mailinglist, often I get same text twice,
Stefan Salewski
- Re: gEDA-user: OT: Mailinglist, often I get same text twice,
Ethan Swint
- Re: gEDA-user: OT: Mailinglist, often I get same text twice,
Stefan Salewski
- Re: gEDA-user: OT: Mailinglist, often I get same text twice,
Joerg
- Re: gEDA-user: OT: Mailinglist, often I get same text twice,
Steven Michalske
- Re: gEDA-user: OT: Mailinglist, often I get same text twice,
Ethan Swint
- Re: gEDA-user: OT: Mailinglist, often I get same text twice,
Stefan Salewski
- Re: gEDA-user: OT: Mailinglist, often I get same text twice,
Ethan Swint
- Re: gEDA-user: OT: Mailinglist, often I get same text twice,
Joerg
- gEDA-user: Daughter card opinion,
Ethan Swint
- Re: gEDA-user: Daughter card opinion,
Steven Michalske
- Re: gEDA-user: Daughter card opinion,
Steve Meier
- Re: gEDA-user: Daughter card opinion,
Ethan Swint
- Re: gEDA-user: Daughter card opinion,
Kai-Martin Knaak
- Re: gEDA-user: Daughter card opinion,
Ethan Swint
- Re: gEDA-user: Daughter card opinion,
Stephan Boettcher
- gEDA-user: Selection/drag behavior,
James Moody
- Re: gEDA-user: Selection/drag behavior,
Stefan Salewski
- Re: gEDA-user: Selection/drag behavior,
Duncan Drennan
- Re: gEDA-user: Selection/drag behavior,
Kai-Martin Knaak
- Re: gEDA-user: Selection/drag behavior,
Duncan Drennan
- Re: gEDA-user: Selection/drag behavior,
Peter Clifton
- Re: gEDA-user: Selection/drag behavior,
Stefan Salewski
- gEDA-user: geda-user attachment policy ?, was: Re: Breaking a track into two segments by using a hole,
Simon Clubley
- gEDA-user: Want to Use TI's symbols, footprints,
Ethan Swint
- Re: gEDA-user: Want to Use TI's symbols, footprints,
Duncan Drennan
- Re: gEDA-user: Want to Use TI's symbols, footprints,
Ethan Swint
- Re: gEDA-user: Want to Use TI's symbols, footprints,
John Luciani
- Re: gEDA-user: Want to Use TI's symbols, footprints,
Steve Meier
- Re: gEDA-user: Want to Use TI's symbols, footprints,
Duncan Drennan
- Re: gEDA-user: Want to Use TI's symbols, footprints,
Bert Timmerman
- Re: gEDA-user: Want to Use TI's symbols, footprints,
Duncan Drennan
- Re: gEDA-user: Want to Use TI's symbols, footprints,
Bert Timmerman
- gEDA-user: netname attrib on input symbols,
Ethan Swint
- gEDA-user: Two simple questions. Hopefully...,
Kipton Moravec
- gEDA-user: Using KiCAD netlist for PCB,
Raphael Derosso Pereira
- gEDA-user: pcb/gsch2pcb: problem with special characters in pin names,
Sascha Silbe
- gEDA-user: OT: D-sub pin-shorter / pin-breaker?,
Steve M. Robbins
- Re: gEDA-user: OT: D-sub pin-shorter / pin-breaker?,
der Mouse
- Re: gEDA-user: OT: D-sub pin-shorter / pin-breaker?,
Peter Clifton
- Re: gEDA-user: OT: D-sub pin-shorter / pin-breaker?,
Bernd Jendrissek
- Re: gEDA-user: pcb, how to remove mm garbage (very short lines)?,
Steve Meier
- Re: gEDA-user: pcb, how to remove mm garbage (very short lines)?,
Steve Meier
- Re: gEDA-user: pcb, how to remove mm garbage (very short lines)?,
John Doty
- Re: gEDA-user: pcb, how to remove mm garbage (very short lines)?,
Peter Clifton
- Re: gEDA-user: pcb, how to remove mm garbage (very short lines)?,
Stefan Salewski
- Re: gEDA-user: pcb, how to remove mm garbage (very short lines)?,
John Doty
- Re: gEDA-user: pcb, how to remove mm garbage (very short lines)?,
Peter Clifton
- Re: gEDA-user: pcb, how to remove mm garbage (very short lines)?,
Steve Meier
- Re: gEDA-user: pcb, how to remove mm garbage (very short lines)?,
John Doty
- Re: gEDA-user: pcb, how to remove mm garbage (very short lines)?,
Steve Meier
- Re: gEDA-user: pcb, how to remove mm garbage (very short lines)?,
Bernd Jendrissek
- gEDA-user: Error at start of gschem,
Jesco Möller
- gEDA-user: Some kind of library manager and hierarchical netlisting,
Yamazaki R2
- Re: gEDA-user: Some kind of library manager and hierarchical netlisting,
r
- Re: gEDA-user: Some kind of library manager and hierarchical netlisting,
Peter Clifton
- Re: gEDA-user: Some kind of library manager and hierarchical netlisting,
Steve Meier
- Re: gEDA-user: Some kind of library manager and hierarchical netlisting,
Peter Clifton
- Re: gEDA-user: Some kind of library manager and hierarchical netlisting,
r
- Re: gEDA-user: Some kind of library manager and hierarchical netlisting,
John Doty
- Re: gEDA-user: Some kind of library manager and hierarchical netlisting,
r
- Re: gEDA-user: Some kind of library manager and hierarchical netlisting,
John Doty
- Re: gEDA-user: Some kind of library manager and hierarchical netlisting,
r
- Re: gEDA-user: Some kind of library manager and hierarchical netlisting,
John Doty
- Re: gEDA-user: Some kind of library manager and hierarchical netlisting,
Paul Tan
- Re: gEDA-user: Some kind of library manager and hierarchical netlisting,
John Doty
- Re: gEDA-user: Some kind of library manager and hierarchical netlisting,
Paul Tan
- Re: gEDA-user: Some kind of library manager and hierarchical netlisting,
r
- Re: gEDA-user: Some kind of library manager and hierarchical netlisting,
John Griessen
- Re: gEDA-user: Some kind of library manager and hierarchical netlisting,
Peter Clifton
- Re: gEDA-user: Some kind of library manager and hierarchical netlisting,
Paul Tan
- Re: gEDA-user: Some kind of library manager and hierarchical netlisting,
Kai-Martin Knaak
- Re: gEDA-user: Some kind of library manager and hierarchical netlisting,
John Doty
- Re: gEDA-user: Some kind of library manager and hierarchical netlisting,
John Griessen
- Re: gEDA-user: Some kind of library manager and hierarchical netlisting,
r
- Re: gEDA-user: Some kind of library manager and hierarchical netlisting,
John Griessen
- Re: gEDA-user: Some kind of library manager and hierarchical netlisting,
Bernd Jendrissek
- Re: gEDA-user: Some kind of library manager and hierarchical netlisting,
Steve Meier
- gEDA-user: pcb, how to remove mm garbage (very short lines)?,
Stefan Salewski
- Re: gEDA-user: pcb, how to remove mm garbage (very short lines)?,
Duncan Drennan
- Re: gEDA-user: pcb, how to remove mm garbage (very short lines)?,
Peter Clifton
- Re: gEDA-user: pcb, how to remove mm garbage (very short lines)?,
Stefan Salewski
- Re: gEDA-user: pcb, how to remove mm garbage (very short lines)?,
DJ Delorie
- Re: gEDA-user: pcb, how to remove mm garbage (very short lines)?,
Peter Clifton
- Re: gEDA-user: pcb, how to remove mm garbage (very short lines)?,
Stefan Salewski
- Re: gEDA-user: pcb, how to remove mm garbage (very short lines)?,
DJ Delorie
- Re: gEDA-user: pcb, how to remove mm garbage (very short lines)?,
Duncan Drennan
- Re: gEDA-user: pcb, how to remove mm garbage (very short lines)?,
Stefan Salewski
- Re: gEDA-user: pcb, how to remove mm garbage (very short lines)?,
Peter Clifton
- Re: gEDA-user: pcb, how to remove mm garbage (very short lines)?,
Stefan Salewski
- Re: gEDA-user: pcb, how to remove mm garbage (very short lines)?,
DJ Delorie
- Re: gEDA-user: pcb, how to remove mm garbage (very short lines)?,
Peter Clifton
- Re: gEDA-user: pcb, how to remove mm garbage (very short lines)?,
DJ Delorie
- Re: gEDA-user: pcb, how to remove mm garbage (very short lines)?,
Stefan Salewski
- Re: gEDA-user: pcb, how to remove mm garbage (very short lines)?,
Peter Clifton
- Re: gEDA-user: pcb, how to remove mm garbage (very short lines)?,
Stefan Salewski
- Re: gEDA-user: pcb, how to remove mm garbage (very short lines)?,
DJ Delorie
- Re: gEDA-user: pcb, how to remove mm garbage (very short lines)?,
Peter Clifton
- Re: gEDA-user: pcb, how to remove mm garbage (very short lines)?,
der Mouse
- Re: gEDA-user: pcb, how to remove mm garbage (very short lines)?,
Peter Clifton
- Re: gEDA-user: pcb, how to remove mm garbage (very short lines)?,
Peter Clifton
- Re: gEDA-user: pcb, how to remove mm garbage (very short lines)?,
Peter Clifton
- Re: gEDA-user: pcb, how to remove mm garbage (very short lines)?,
DJ Delorie
- Re: gEDA-user: pcb, how to remove mm garbage (very short lines)?,
DJ Delorie
- Re: gEDA-user: pcb, how to remove mm garbage (very short lines)?,
Stefan Salewski
- gEDA-user: starpoints... how?,
Levente Kovacs
- gEDA-user: "mm garbage", cannot repro,
Ben Jackson
- Re: gEDA-user: "mm garbage", cannot repro,
DJ Delorie
- Re: gEDA-user: "mm garbage", cannot repro,
Ben Jackson
- Re: gEDA-user: "mm garbage", cannot repro,
Bert Timmerman
- Re: gEDA-user: "mm garbage", cannot repro,
Ben Jackson
- Re: gEDA-user: "mm garbage", cannot repro,
Stephan Boettcher
- Re: gEDA-user: "mm garbage", cannot repro,
Ben Jackson
- Re: gEDA-user: "mm garbage", cannot repro,
DJ Delorie
- Re: gEDA-user: "mm garbage", cannot repro,
Ben Jackson
- Re: gEDA-user: "mm garbage", cannot repro,
Bert Timmerman
- Re: gEDA-user: "mm garbage", cannot repro,
Stefan Salewski
- gEDA-user: OT: Help, Latex, schematic and formula,
Felix Maier
- gEDA-user: Waveform viewers other than gwave?,
Yamazaki R2
- gEDA-user: bugs, warts and feature requests,
Kai-Martin Knaak
- Re: gEDA-user: bugs, warts and feature requests,
Kai-Martin Knaak
- Re: gEDA-user: bugs, warts and feature requests,
Peter TB Brett
- Re: gEDA-user: bugs, warts and feature requests,
Kai-Martin Knaak
- Re: gEDA-user: bugs, warts and feature requests,
DJ Delorie
- Re: gEDA-user: bugs, warts and feature requests,
Kai-Martin Knaak
- Re: gEDA-user: bugs, warts and feature requests,
Stefan Salewski
- Re: gEDA-user: bugs, warts and feature requests,
Kai-Martin Knaak
- Re: gEDA-user: bugs, warts and feature requests,
DJ Delorie
- Re: gEDA-user: bugs, warts and feature requests,
Kai-Martin Knaak
- Re: gEDA-user: bugs, warts and feature requests,
Stuart Brorson
- Re: gEDA-user: bugs, warts and feature requests,
DJ Delorie
- Re: gEDA-user: bugs, warts and feature requests,
Stuart Brorson
- Re: gEDA-user: bugs, warts and feature requests,
DJ Delorie
- Re: gEDA-user: bugs, warts and feature requests,
Stuart Brorson
- Re: gEDA-user: bugs, warts and feature requests,
DJ Delorie
- Re: gEDA-user: bugs, warts and feature requests,
Stuart Brorson
- Re: gEDA-user: bugs, warts and feature requests,
Steven Michalske
- Re: gEDA-user: bugs, warts and feature requests,
DJ Delorie
- Re: gEDA-user: bugs, warts and feature requests,
Kai-Martin Knaak
- Re: gEDA-user: bugs, warts and feature requests,
Peter Clifton
- Re: gEDA-user: bugs, warts and feature requests,
Steven Michalske
- Re: gEDA-user: bugs, warts and feature requests,
Kai-Martin Knaak
- gEDA-user: Just another minor pcb bug,
Stefan Salewski
- gEDA-user: (no subject),
Sean Carter
- Re: gEDA-user: Surface mount LEDs,
DJ Delorie
- Re: gEDA-user: Feature requests printout and export,
DJ Delorie
- gEDA-user: More Beginner Questions,
Kipton Moravec
- gEDA-user: First Snapshot of Simbus,
Stephen Williams
- gEDA-user: Screwed up something - Read error on a schematic.,
Kipton Moravec
- gEDA-user: Spice PWL database or PWL generator,
Yamazaki R2
- gEDA-user: undo and zoom/view functions in gschem,
Duncan Drennan
- gEDA-user: pcb drill table in mm,
Duncan Drennan
- gEDA-user: gschem, graphical=1, but device is in netlist,
Stefan Salewski
- gEDA-user: pcb-20081128 snapshot,
Dan McMahill
- gEDA-user: GTKWave scroll in interactive mode,
Abdous Mandous
- gEDA-user: temperature logger/sensor,
Levente Kovacs
- gEDA-user: Editing footprints/nets for off-board parts,
Robert Ewald
Mail converted by MHonArc