Mail Index

• Thread Index

• Re: gEDA-user: Icarus Verilog Release 0.8.6
  • From: Günter Dannoritzer
• Re: gEDA-user: could not connect nets gschem/gsch2pcb/pcb
  • From: Wojciech Kazubski
• gEDA-user: Heirarchial Schematic to Symbol Generator is Available
  • From: A Tan
• Re: gEDA-user: 2 make errors installing gwave
  • From: al davis
• Re: gEDA-user: 2 make errors installing gwave
  • From: al davis
• Re: gEDA-user: 2 make errors installing gwave
  • From: al davis
• Re: gEDA-user: 2 make errors installing gwave
  • From: al davis
• Re: gEDA-user: gschem, howto prevent generation of .sch~ backup files?
  • From: al davis
• Re: gEDA-user: 2 make errors installing gwave
  • From: al davis
• Re: gEDA-user: 2 make errors installing gwave
  • From: al davis
• Re: gEDA-user: [pcb] "first board" docs
  • From: al davis
• gEDA-user: uEDA .. was .. Re: Heavy Symbols and such
  • From: al davis
• Re: gEDA-user: uEDA .. was .. Re: Heavy Symbols and such
  • From: al davis
• Re: gEDA-user: uEDA .. was .. Re: Heavy Symbols and such
  • From: al davis
• Re: gEDA-user: uEDA .. was .. Re: Heavy Symbols and such
  • From: al davis
• Re: gEDA-user: uEDA .. was .. Re: Heavy Symbols and such
  • From: al davis
• Re: gEDA-user: uEDA .. was .. Re: Heavy Symbols and such
  • From: al davis
• Re: gEDA-user: uEDA .. was .. Re: Heavy Symbols and such
  • From: al davis
• Re: gEDA-user: gschem and guile
  • From: al davis
• Re: gEDA-user: Shall we use letters (i.e. E, C, B ) for transsitor pin names?
  • From: al davis
• Re: gEDA-user: Shall we use letters (i.e. E, C, B ) for transsitor pin names?
  • From: al davis
• gEDA-user: gnucap development snapshot 2007-12-16
  • From: al davis
• Re: gEDA-user: youngest user?
  • From: al davis
• Re: gEDA-user: anyone has had success with 0.2mm?
  • From: Alain M.
• Re: gEDA-user: anyone has had success with 0.2mm?
  • From: Alain M.
• Re: gEDA-user: Heavy Symbols and such
  • From: Alain M.
• Re: gEDA-user: [pcb] "first board" docs
  • From: Alain M.
• Re: gEDA-user: Subscribing to this list
  • From: alan
• gEDA-user: gEDA/gaf development version 1.3.0-20071229 released!
  • From: Ales Hvezda
• gEDA-user: gEDA/gaf stable version 1.2.1-20071231 released!
  • From: Ales Hvezda
• Re: gEDA-user: gEDA/gaf stable version 1.2.1-20071231 released!
  • From: Ales Hvezda
• Re: gEDA-user: usb jack footprints
  • From: Alexander Gvozdev
• Re: gEDA-user: anyone has had success with 0.2mm?
  • From: andrewm
• Re: gEDA-user: anyone has had success with 0.2mm?
  • From: andrewm
• Re: gEDA-user: Heavy Symbols and such
  • From: Andy Peters
• Re: gEDA-user: Parts DB API
  • From: Andy Peters
• Re: gEDA-user: youngest user?
  • From: Andy Peters
• Re: gEDA-user: could not connect nets gschem/gsch2pcb/pcb
  • From: Andy Peters
• Re: gEDA-user: could not connect nets gschem/gsch2pcb/pcb
  • From: Andy Peters
• Re: gEDA-user: Couple pics from my new PCB
  • From: Andy Peters
• gEDA-user: libgeda build failure
  • From: Andy Peters
• Re: gEDA-user: libgeda build failure
  • From: Andy Peters
• Re: gEDA-user: libgeda build failure
  • From: Andy Peters
• Re: gEDA-user: libgeda build failure
  • From: Andy Peters
• Re: gEDA-user: libgeda build failure
  • From: Andy Peters
• Re: gEDA-user: Parts Data deffinitions
  • From: Anselmo
• gEDA-user: any way to mirror text??
  • From: Ben Jackson
• gEDA-user: change/remove silk without destroying elementname
  • From: Ben Jackson
• gEDA-user: opinions on move-line-to-layer via removal?
  • From: Ben Jackson
• gEDA-user: what does holding ctrl mean while drawing lines?
  • From: Ben Jackson
• gEDA-user: big bug in group move fixed (pcb)
  • From: Ben Jackson
• Re: gEDA-user: [PCB] DRC - why is it modal?
  • From: Ben Jackson
• gEDA-user: "min annular ring" vs "drill to copper distance"
  • From: Ben Jackson
• Re: gEDA-user: "min annular ring" vs "drill to copper distance"
  • From: Ben Jackson
• Re: gEDA-user: troubles with new snap-to-pad behavior
  • From: Ben Jackson
• Re: gEDA-user: anyone has had success with 0.2mm?
  • From: Ben Jackson
• gEDA-user: four-layer builds (was: anyone has had success with 0.2mm?)
  • From: Ben Jackson
• Re: gEDA-user: anyone has had success with 0.2mm?
  • From: Ben Jackson
• Re: gEDA-user: Pads do not clear polygons
  • From: Ben Jackson
• Re: gEDA-user: Pads do not clear polygons
  • From: Ben Jackson
• Re: gEDA-user: [pcb] "first board" docs
  • From: Ben Jackson
• Re: gEDA-user: Heavy Symbols and such
  • From: Ben Jackson
• Re: gEDA-user: Pads do not clear polygons
  • From: Ben Jackson
• Re: gEDA-user: how to add a rat to a via?
  • From: Ben Jackson
• Re: gEDA-user: uEDA .. was .. Re: Heavy Symbols and such
  • From: Ben Jackson
• Re: gEDA-user: need a bit of help with a (plated?) drill
  • From: Ben Jackson
• Re: gEDA-user: pcb 20070912 and GTK trouble
  • From: Ben Jackson
• Re: gEDA-user: pcb 20070912 and GTK trouble
  • From: Ben Jackson
• gEDA-user: Limited transparency support in Lesstif HID
  • From: Ben Jackson
• Re: gEDA-user: Why does DRC check annular ring twice?
  • From: Ben Jackson
• gEDA-user: Added Zoom(Toggle) to lesstif HID
  • From: Ben Jackson
• Re: gEDA-user: pcb 20070912 and GTK trouble
  • From: Ben Jackson
• Re: gEDA-user: Added Zoom(Toggle) to lesstif HID
  • From: Ben Jackson
• Re: gEDA-user: Shall we use letters (i.e. E, C, B ) for transsitor pin names?
  • From: Ben Jackson
• Re: gEDA-user: printing out more than one schematic sheet as a ps document
  • From: Ben Jackson
• Re: gEDA-user: HOW TO COUNT QTY OF UNROUTED TRACKS (LIKE A DRC) IN PCB
  • From: Ben Jackson
• Re: gEDA-user: Finding Polygon Vertices
  • From: Ben Jackson
• Re: gEDA-user: PCB bug?
  • From: Ben Jackson
• gEDA-user: Finally building the board I started using geda/pcb for!
  • From: Ben Jackson
• Re: gEDA-user: Finally building the board I started using geda/pcb for!
  • From: Ben Jackson
• Re: gEDA-user: Finally building the board I started using geda/pcb for!
  • From: Ben Jackson
• Re: gEDA-user: Any TV repair gurus lurking?
  • From: Ben Jackson
• gEDA-user: Couple pics from my new PCB
  • From: Ben Jackson
• Re: gEDA-user: Couple pics from my new PCB
  • From: Ben Jackson
• Re: gEDA-user: how to select components st they move wires in pcb?
  • From: Ben Jackson
• Re: gEDA-user: [pcb] terminology update
  • From: Bert Timmerman
• Re: gEDA-user: Gerbv with OpenGL
  • From: Bert Timmerman
• Re: gEDA-user: Gerbv with OpenGL
  • From: Bert Timmerman
• Re: gEDA-user: Heavy Symbols and such
  • From: Bert Timmerman
• Re: gEDA-user: Heavy Symbols and such
  • From: Bert Timmerman
• Re: gEDA-user: Testing of GIT HEAD, new MIME icons etc...
  • From: Bert Timmerman
• Re: gEDA-user: Fwd: Parts DB API: the story so far
  • From: Bert Timmerman
• Re: gEDA-user: [pcb] "first board" docs
  • From: Bert Timmerman
• Re: gEDA-user: [pcb] "first board" docs
  • From: Bert Timmerman
• Re: gEDA-user: always build a prototype!
  • From: Bob Paddock
• Re: gEDA-user: always build a prototype!
  • From: Bob Paddock
• Re: gEDA-user: Heavy Symbols and such
  • From: Bob Paddock
• gEDA-user: Spelling was Heavy Symbols and such
  • From: Bob Paddock
• gEDA-user: how to select components st they move wires in pcb?
  • From: Britton Kerin
• gEDA-user: is tragesym still the one to use? and a script for hierarchical symbol making
  • From: Britton Kerin
• Re: gEDA-user: is tragesym still the one to use? and a script for hierarchical symbol making
  • From: Britton Kerin
• Re: gEDA-user: 2 make errors installing gwave
  • From: Dan McMahill
• Re: gEDA-user: 2 make errors installing gwave
  • From: Dan McMahill
• Re: gEDA-user: 2 make errors installing gwave
  • From: Dan McMahill
• Re: gEDA-user: gEDA for mass production?
  • From: Dan McMahill
• Re: gEDA-user: Icarus Verilog Release 0.8.6
  • From: Dan McMahill
• Re: gEDA-user: Symbols and footprints and stuff, oh my
  • From: Dan McMahill
• Re: gEDA-user: Heavy Symbols and such
  • From: Dan McMahill
• Re: gEDA-user: uEDA .. was .. Re: Heavy Symbols and such
  • From: Dan McMahill
• Re: gEDA-user: uEDA .. was .. Re: Heavy Symbols and such
  • From: Dan McMahill
• Re: gEDA-user: Problem with OGD1: Can anyone advise on good low-jitter
  • From: Dan McMahill
• Re: gEDA-user: ElementArc
  • From: Dan McMahill
• Re: gEDA-user: PCB Thermal finger width
  • From: Dan McMahill
• Re: gEDA-user: Heavy Symbols and such
  • From: Dan McMahill
• Re: gEDA-user: Heavy Symbols and such
  • From: Dan McMahill
• Re: gEDA-user: Shall we use letters (i.e. E, C, B ) for transsitor pin names?
  • From: Dan McMahill
• Re: gEDA-user: PCB pcblib-newlib and
  • From: Dan McMahill
• Re: gEDA-user: Any TV repair gurus lurking?
  • From: Dan McMahill
• Re: gEDA-user: Any TV repair gurus lurking?
  • From: Dan McMahill
• gEDA-user: PCB Thermal finger width
  • From: Daniel Kruszyna
• Re: gEDA-user: gEDA-dev: iverilog and Xilinx 8.2
  • From: Daniel O'Connor
• Re: gEDA-user: gEDA-dev: iverilog and Xilinx 8.2
  • From: Daniel O'Connor
• Re: gEDA-user: [pcb] "first board" docs
  • From: Darryl Gibson
• Re: gEDA-user: Shall we use letters (i.e. E, C, B ) for transsitor pin names?
  • From: Darryl Gibson
• Re: gEDA-user: youngest user?
  • From: Darryl Gibson
• Re: gEDA-user: youngest user?
  • From: Darryl Gibson
• Re: gEDA-user: Any TV repair gurus lurking?
  • From: Darryl Gibson
• Re: gEDA-user: Any TV repair gurus lurking?
  • From: Darryl Gibson
• Re: gEDA-user: Any TV repair gurus lurking?
  • From: Darryl Gibson
• Re: gEDA-user: Gerbv with OpenGL
  • From: Dave McGuire
• Re: gEDA-user: Gerbv with OpenGL
  • From: Dave McGuire
• Re: gEDA-user: Gerbv with OpenGL
  • From: Dave McGuire
• Re: gEDA-user: [pcb] "first board" docs
  • From: Dave McGuire
• Re: gEDA-user: [pcb] "first board" docs
  • From: Dave McGuire
• Re: gEDA-user: Parts DB
  • From: Dave McGuire
• Re: gEDA-user: Parts DB
  • From: Dave McGuire
• Re: gEDA-user: Parts DB
  • From: Dave McGuire
• Re: gEDA-user: Parts DB API
  • From: Dave McGuire
• Re: gEDA-user: Parts DB API
  • From: Dave McGuire
• Re: gEDA-user: Parts DB API
  • From: Dave McGuire
• Re: gEDA-user: Fwd: Parts DB API: the story so far
  • From: Dave McGuire
• Re: gEDA-user: Fwd: Parts DB API: the story so far
  • From: Dave McGuire
• Re: gEDA-user: youngest user?
  • From: Dave McGuire
• Re: gEDA-user: youngest user?
  • From: Dave McGuire
• Re: gEDA-user: Fwd: Parts DB API: the story so far
  • From: Dave McGuire
• Re: gEDA-user: change/remove silk without destroying elementname
  • From: Dave N6NZ
• Re: gEDA-user: [pcb] terminology update
  • From: Dave N6NZ
• gEDA-user: [PCB] DRC - why is it modal?
  • From: Dave N6NZ
• Re: gEDA-user: [PCB] DRC - why is it modal?
  • From: Dave N6NZ
• Re: gEDA-user: anyone has had success with 0.2mm?
  • From: Dave N6NZ
• Re: gEDA-user: gschem, howto prevent generation of .sch~ backup files?
  • From: Dave N6NZ
• Re: gEDA-user: usb jack footprints
  • From: Dave N6NZ
• Re: gEDA-user: [pcb] "first board" docs
  • From: Dave N6NZ
• Re: gEDA-user: Heavy Symbols and such
  • From: Dave N6NZ
• Re: gEDA-user: [pcb] "first board" docs
  • From: Dave N6NZ
• Re: gEDA-user: Heavy Symbols and such
  • From: Dave N6NZ
• Re: gEDA-user: Heavy Symbols and such
  • From: Dave N6NZ
• Re: gEDA-user: Heavy Symbols and such
  • From: Dave N6NZ
• gEDA-user: [gschem] Bus off-page connector?
  • From: Dave N6NZ
• Re: gEDA-user: [gschem] Bus off-page connector?
  • From: Dave N6NZ
• Re: gEDA-user: Heavy Symbols and such
  • From: Dave N6NZ
• Re: gEDA-user: how to add a rat to a via?
  • From: Dave N6NZ
• Re: gEDA-user: uEDA .. was .. Re: Heavy Symbols and such
  • From: Dave N6NZ
• Re: gEDA-user: uEDA .. was .. Re: Heavy Symbols and such
  • From: Dave N6NZ
• Re: gEDA-user: Heavy Symbols and such
  • From: Dave N6NZ
• gEDA-user: [pcb] how to make pad on two sides, no drill
  • From: Dave N6NZ
• Re: gEDA-user: Heavy Symbols and such
  • From: Dave N6NZ
• Re: gEDA-user: Heavy Symbols and such
  • From: Dave N6NZ
• Re: gEDA-user: Heavy Symbols and such
  • From: Dave N6NZ
• Re: gEDA-user: Heavy Symbols and such
  • From: Dave N6NZ
• gEDA-user: [gattrib] OS X cut/paste
  • From: Dave N6NZ
• gEDA-user: Parts DB (was: Re: Heavy Symbols and such)
  • From: Dave N6NZ
• Re: gEDA-user: Parts DB
  • From: Dave N6NZ
• Re: gEDA-user: Parts DB
  • From: Dave N6NZ
• Re: gEDA-user: Parts DB
  • From: Dave N6NZ
• Re: gEDA-user: Parts DB
  • From: Dave N6NZ
• Re: gEDA-user: Parts DB API
  • From: Dave N6NZ
• Re: gEDA-user: Parts DB API
  • From: Dave N6NZ
• Re: gEDA-user: Parts DB API
  • From: Dave N6NZ
• Re: gEDA-user: PCB pcblib-newlib and
  • From: Dave N6NZ
• Re: gEDA-user: Parts DB API
  • From: Dave N6NZ
• Re: gEDA-user: Parts DB API
  • From: Dave N6NZ
• Re: gEDA-user: Parts DB API
  • From: Dave N6NZ
• gEDA-user: youngest user?
  • From: Dave N6NZ
• Re: gEDA-user: Parts DB API
  • From: Dave N6NZ
• Re: gEDA-user: Fwd: Parts DB API: the story so far
  • From: Dave N6NZ
• Re: gEDA-user: Fwd: Parts DB API: the story so far
  • From: Dave N6NZ
• gEDA-user: usb jack footprints
  • From: David Griffith
• Re: gEDA-user: gerbv - abnormal exit (2nd attempt)
  • From: David Kerber
• gEDA-user: [OT] Beer and bicycles (was: Re: youngest user?)
  • From: David SMITH
• Re: gEDA-user: youngest user?
  • From: David SMITH
• Re: gEDA-user: gschem: customizing keymaps
  • From: Dean Ferreyra
• Re: gEDA-user: gschem: customizing keymaps
  • From: Dean Ferreyra
• Re: gEDA-user: pcb-place or PCB_Parse perl module
  • From: Didier Villevalois
• Re: gEDA-user: Parts DB
  • From: Didier Villevalois
• gEDA-user: Schematics and layouts' nets thoughts
  • From: Didier Villevalois
• Re: gEDA-user: printing solder layer only, mirrored
  • From: DJ Delorie
• Re: gEDA-user: [pcb] terminology
  • From: DJ Delorie
• Re: gEDA-user: [pcb] terminology
  • From: DJ Delorie
• Re: gEDA-user: [pcb] terminology
  • From: DJ Delorie
• Re: gEDA-user: [pcb] terminology
  • From: DJ Delorie
• Re: gEDA-user: any way to mirror text??
  • From: DJ Delorie
• Re: gEDA-user: change/remove silk without destroying elementname
  • From: DJ Delorie
• Re: gEDA-user: [pcb] terminology
  • From: DJ Delorie
• gEDA-user: [pcb] terminology update
  • From: DJ Delorie
• Re: gEDA-user: what does holding ctrl mean while drawing lines?
  • From: DJ Delorie
• Re: gEDA-user: always build a prototype!
  • From: DJ Delorie
• Re: gEDA-user: [PCB] DRC - why is it modal?
  • From: DJ Delorie
• Re: gEDA-user: www.gedasymbols.org unreachable?
  • From: DJ Delorie
• Re: gEDA-user: always build a prototype!
  • From: DJ Delorie
• Re: gEDA-user: [PCB] DRC - why is it modal?
  • From: DJ Delorie
• Re: gEDA-user: [PCB] DRC - why is it modal?
  • From: DJ Delorie
• Re: gEDA-user: gerbv - not reading format
  • From: DJ Delorie
• Re: gEDA-user: anyone has had success with 0.2mm?
  • From: DJ Delorie
• Re: gEDA-user: anyone has had success with 0.2mm?
  • From: DJ Delorie
• Re: gEDA-user: four-layer builds (was: anyone has had success with 0.2mm?)
  • From: DJ Delorie
• Re: gEDA-user: gEDA for mass production?
  • From: DJ Delorie
• Re: gEDA-user: anyone has had success with 0.2mm?
  • From: DJ Delorie
• Re: gEDA-user: anyone has had success with 0.2mm?
  • From: DJ Delorie
• Re: gEDA-user: anyone has had success with 0.2mm?
  • From: DJ Delorie
• Re: gEDA-user: usb jack footprints
  • From: DJ Delorie
• Re: gEDA-user: Pads do not clear polygons
  • From: DJ Delorie
• Re: gEDA-user: Heavy Symbols and such
  • From: DJ Delorie
• gEDA-user: [pcb] "first board" docs
  • From: DJ Delorie
• Re: gEDA-user: [pcb] "first board" docs
  • From: DJ Delorie
• Re: gEDA-user: [pcb] "first board" docs
  • From: DJ Delorie
• Re: gEDA-user: [pcb] "first board" docs
  • From: DJ Delorie
• Re: gEDA-user: [pcb] "first board" docs
  • From: DJ Delorie
• Re: gEDA-user: Heavy Symbols and such
  • From: DJ Delorie
• Re: gEDA-user: Heavy Symbols and such
  • From: DJ Delorie
• Re: gEDA-user: [pcb] "first board" docs
  • From: DJ Delorie
• Re: gEDA-user: how to add a rat to a via?
  • From: DJ Delorie
• Re: gEDA-user: [pcb] "first board" docs
  • From: DJ Delorie
• Re: gEDA-user: ElementArc
  • From: DJ Delorie
• Re: gEDA-user: ElementArc
  • From: DJ Delorie
• Re: gEDA-user: ElementArc
  • From: DJ Delorie
• Re: gEDA-user: uEDA .. was .. Re: Heavy Symbols and such
  • From: DJ Delorie
• Re: gEDA-user: uEDA .. was .. Re: Heavy Symbols and such
  • From: DJ Delorie
• gEDA-user: [pcb] Terminology section "done"
  • From: DJ Delorie
• Re: gEDA-user: [pcb] Terminology section "done"
  • From: DJ Delorie
• Re: gEDA-user: pcb 20070912 and GTK trouble
  • From: DJ Delorie
• Re: gEDA-user: [pcb] how to make pad on two sides, no drill
  • From: DJ Delorie
• Re: gEDA-user: Why does DRC check annular ring twice?
  • From: DJ Delorie
• gEDA-user: [pcb] gtk crosshair enter/leave patch
  • From: DJ Delorie
• Re: gEDA-user: pcb 20070912 and GTK trouble
  • From: DJ Delorie
• Re: gEDA-user: pcb 20070912 and GTK trouble + another bug?
  • From: DJ Delorie
• Re: gEDA-user: PCB Thermal finger width
  • From: DJ Delorie
• Re: gEDA-user: Heavy Symbols and such
  • From: DJ Delorie
• Re: gEDA-user: Heavy Symbols and such
  • From: DJ Delorie
• Re: gEDA-user: Heavy Symbols and such
  • From: DJ Delorie
• Re: gEDA-user: Heavy Symbols and such
  • From: DJ Delorie
• Re: gEDA-user: Heavy Symbols and such
  • From: DJ Delorie
• Re: gEDA-user: [pcb] "first board" docs
  • From: DJ Delorie
• gEDA-user: contest results are out!
  • From: DJ Delorie
• Re: gEDA-user: contest results are out!
  • From: DJ Delorie
• Re: gEDA-user: printing out more than one schematic sheet as a ps document
  • From: DJ Delorie
• Re: gEDA-user: printing out more than one schematic sheet as a ps document
  • From: DJ Delorie
• Re: gEDA-user: contest results are out!
  • From: DJ Delorie
• Re: gEDA-user: Parts DB API
  • From: DJ Delorie
• Re: gEDA-user: Parts DB API
  • From: DJ Delorie
• Re: gEDA-user: Parts DB API
  • From: DJ Delorie
• Re: gEDA-user: Parts DB API
  • From: DJ Delorie
• Re: gEDA-user: Parts DB API
  • From: DJ Delorie
• Re: gEDA-user: Parts DB API
  • From: DJ Delorie
• Re: gEDA-user: Parts DB API
  • From: DJ Delorie
• Re: gEDA-user: PCB pcblib-newlib and
  • From: DJ Delorie
• Re: gEDA-user: Parts DB API
  • From: DJ Delorie
• Re: gEDA-user: youngest user?
  • From: DJ Delorie
• Re: gEDA-user: Finally building the board I started using geda/pcb for!
  • From: DJ Delorie
• Re: gEDA-user: youngest user?
  • From: DJ Delorie
• Re: gEDA-user: Fwd: Parts DB API: the story so far
  • From: DJ Delorie
• Re: gEDA-user: Fwd: Parts DB API: the story so far
  • From: DJ Delorie
• Re: gEDA-user: youngest user?
  • From: DJ Delorie
• Re: gEDA-user: Fwd: Parts DB API: the story so far
  • From: DJ Delorie
• Re: gEDA-user: youngest user?
  • From: DJ Delorie
• Re: gEDA-user: Any TV repair gurus lurking?
  • From: DJ Delorie
• Re: gEDA-user: silkscreen styles (was: TV gurus lurking?)
  • From: DJ Delorie
• Re: gEDA-user: Couple pics from my new PCB
  • From: DJ Delorie
• Re: gEDA-user: Couple pics from my new PCB
  • From: DJ Delorie
• Re: gEDA-user: Couple pics from my new PCB
  • From: DJ Delorie
• Re: gEDA-user: how to select components st they move wires in pcb?
  • From: DJ Delorie
• Re: gEDA-user: Fwd: Parts DB API: the story so far
  • From: DJ Delorie
• Re: gEDA-user: Fwd: Parts DB API: the story so far
  • From: DJ Delorie
• Re: gEDA-user: Fwd: Parts DB API: the story so far
  • From: DJ Delorie
• Re: gEDA-user: [pcb] "first board" docs
  • From: DJ Delorie
• Re: gEDA-user: [pcb] "first board" docs
  • From: DJ Delorie
• Re: gEDA-user: [pcb] "first board" docs
  • From: DJ Delorie
• Re: gEDA-user: [pcb] "first board" docs
  • From: DJ Delorie
• Re: gEDA-user: is tragesym still the one to use? and a script for hierarchical symbol making
  • From: DJ Delorie
• Re: gEDA-user: [pcb] "first board" docs
  • From: DJ Delorie
• Re: gEDA-user: gEDA for mass production?
  • From: Duncan Drennan
• Re: gEDA-user: Gerbv with OpenGL
  • From: evan foss
• Re: gEDA-user: Gerbv with OpenGL
  • From: evan foss
• Re: gEDA-user: Gerbv with OpenGL
  • From: evan foss
• Re: gEDA-user: Gerbv with OpenGL
  • From: evan foss
• Re: gEDA-user: Gerbv with OpenGL
  • From: evan foss
• Re: gEDA-user: Gerbv with OpenGL
  • From: evan foss
• gEDA-user: gerbv - not reading format
  • From: Frank Miles
• Re: gEDA-user: Shall we use letters (i.e. E, C, B ) for transsitor pin names?
  • From: Gene Heskett
• Re: gEDA-user: Any TV repair gurus lurking?
  • From: Gene Heskett
• Re: gEDA-user: Any TV repair gurus lurking?
  • From: Gene Heskett
• gEDA-user: gschem background image
  • From: Greg Cunningham
• Re: gEDA-user: youngest user?
  • From: Greg Cunningham
• Re: gEDA-user: Any TV repair gurus lurking?
  • From: Greg Cunningham
• Re: gEDA-user: youngest user?
  • From: Greg Cunningham
• Re: gEDA-user: Pads do not clear polygons
  • From: Harry Eaton
• Re: gEDA-user: Pads do not clear polygons
  • From: Harry Eaton
• Re: gEDA-user: updating your OS, was: Re: Export gerber crash
  • From: Ian Chapman
• gEDA-user: Subscribing to this list
  • From: Ian Chapman
• Re: gEDA-user: updating your OS, was: Re: Export gerber crash
  • From: Ian Chapman
• Re: gEDA-user: updating your OS, was: Re: Export gerber crash
  • From: Ian Chapman
• Re: gEDA-user: updating your OS, was: Re: Export gerber crash
  • From: Ian Chapman
• gEDA-user: ElementArc
  • From: Ian Chapman
• Re: gEDA-user: Subscribing to this list
  • From: Ian Chapman
• Re: gEDA-user: ElementArc
  • From: Ian Chapman
• Re: gEDA-user: ElementArc
  • From: Ian Chapman
• Re: gEDA-user: ElementArc
  • From: Ian Chapman
• Re: gEDA-user: ElementArc
  • From: Ian Chapman
• gEDA-user: gsch2pcb update
  • From: Ian Chapman
• Re: gEDA-user: gsch2pcb update
  • From: Ian Chapman
• gEDA-user: gerbv
  • From: Ian Chapman
• Re: gEDA-user: gerbv
  • From: Ian Chapman
• gEDA-user: gschem and guile
  • From: Ian Chapman
• Re: gEDA-user: gsch2pcb update
  • From: Ian Chapman
• Re: gEDA-user: gsch2pcb update
  • From: Ian Chapman
• Re: gEDA-user: Any TV repair gurus lurking?
  • From: Ian Chapman
• Re: gEDA-user: opinions on move-line-to-layer via removal?
  • From: Igor2
• Re: gEDA-user: pcb 20070912 and GTK trouble
  • From: Igor2
• Re: gEDA-user: pcb 20070912 and GTK trouble
  • From: Igor2
• Re: gEDA-user: pcb 20070912 and GTK trouble
  • From: Igor2
• Re: gEDA-user: pcb 20070912 and GTK trouble + another bug?
  • From: Igor2
• Re: gEDA-user: pcb 20070912 and GTK trouble + another bug?
  • From: Igor2
• Re: gEDA-user: Couple pics from my new PCB
  • From: Igor2
• Re: gEDA-user: Parts DB API
  • From: Ivan Stankovic
• Re: gEDA-user: Parts DB API
  • From: Ivan Stankovic
• Re: gEDA-user: Parts DB API
  • From: Ivan Stankovic
• gEDA-user: Ubuntu Vmware Player Image
  • From: Jeff VR
• Re: gEDA-user: gerbv - not reading format
  • From: joe tarantino
• Re: gEDA-user: gEDA for mass production?
  • From: joe tarantino
• Re: gEDA-user: PCB Thermal finger width
  • From: joe tarantino
• Re: gEDA-user: usb jack footprints
  • From: joeft
• Re: gEDA-user: uEDA .. was .. Re: Heavy Symbols and such
  • From: joeft
• Re: gEDA-user: www.gedasymbols.org unreachable?
  • From: John Coppens
• Re: gEDA-user: uEDA .. was .. Re: Heavy Symbols and such
  • From: John Doty
• Re: gEDA-user: uEDA .. was .. Re: Heavy Symbols and such
  • From: John Doty
• Re: gEDA-user: uEDA .. was .. Re: Heavy Symbols and such
  • From: John Doty
• Re: gEDA-user: uEDA .. was .. Re: Heavy Symbols and such
  • From: John Doty
• Re: gEDA-user: uEDA .. was .. Re: Heavy Symbols and such
  • From: John Doty
• Re: gEDA-user: uEDA .. was .. Re: Heavy Symbols and such
  • From: John Doty
• Re: gEDA-user: uEDA .. was .. Re: Heavy Symbols and such
  • From: John Doty
• Re: gEDA-user: uEDA .. was .. Re: Heavy Symbols and such
  • From: John Doty
• Re: gEDA-user: uEDA .. was .. Re: Heavy Symbols and such
  • From: John Doty
• Re: gEDA-user: uEDA .. was .. Re: Heavy Symbols and such
  • From: John Doty
• Re: gEDA-user: uEDA .. was .. Re: Heavy Symbols and such
  • From: John Doty
• Re: gEDA-user: project-specific symbol libraries (again)
  • From: John Doty
• Re: gEDA-user: uEDA .. was .. Re: Heavy Symbols and such
  • From: John Doty
• Re: gEDA-user: [gattrib] OS X cut/paste
  • From: John Doty
• Re: gEDA-user: printing out more than one schematic sheet as a ps document
  • From: John Doty
• Re: gEDA-user: Parts DB API
  • From: John Doty
• Re: gEDA-user: Parts DB API
  • From: John Doty
• Re: gEDA-user: Parts DB API
  • From: John Doty
• Re: gEDA-user: Parts DB API
  • From: John Doty
• Re: gEDA-user: Parts DB API
  • From: John Doty
• Re: gEDA-user: Parts DB API
  • From: John Doty
• Re: gEDA-user: Parts DB API
  • From: John Doty
• Re: gEDA-user: youngest user?
  • From: John Doty
• Re: gEDA-user: youngest user?
  • From: John Doty
• Re: gEDA-user: Parts DB API
  • From: John Doty
• Re: gEDA-user: Fwd: Parts DB API: the story so far
  • From: John Doty
• Re: gEDA-user: Fwd: Parts DB API: the story so far
  • From: John Doty
• Re: gEDA-user: Fwd: Parts DB API: the story so far
  • From: John Doty
• Re: gEDA-user: Fwd: Parts DB API: the story so far
  • From: John Doty
• Re: gEDA-user: youngest user?
  • From: John Doty
• Re: gEDA-user: Fwd: Parts DB API: the story so far
  • From: John Doty
• Re: gEDA-user: Parts DB API
  • From: John Doty
• Re: gEDA-user: youngest user?
  • From: John Doty
• Re: gEDA-user: youngest user?
  • From: John Doty
• Re: gEDA-user: could not connect nets gschem/gsch2pcb/pcb
  • From: John Doty
• Re: gEDA-user: Any TV repair gurus lurking?
  • From: John Doty
• Re: gEDA-user: Fwd: Parts DB API: the story so far
  • From: John Doty
• gEDA-user: Schematic reuse and BOM centricity
  • From: John Doty
• Re: gEDA-user: www.gedasymbols.org unreachable?
  • From: John Griessen
• Re: gEDA-user: Gerbv with OpenGL
  • From: John Griessen
• Re: gEDA-user: Gerbv with OpenGL
  • From: John Griessen
• Re: gEDA-user: gEDA for mass production?
  • From: John Griessen
• Re: gEDA-user: Gerbv with OpenGL
  • From: John Griessen
• Re: gEDA-user: Symbols and footprints and stuff, oh my
  • From: John Griessen
• Re: gEDA-user: Heavy Symbols and such
  • From: John Griessen
• Re: gEDA-user: [pcb] "first board" docs
  • From: John Griessen
• Re: gEDA-user: [pcb] "first board" docs
  • From: John Griessen
• Re: gEDA-user: Heavy Symbols and such
  • From: John Griessen
• Re: gEDA-user: Heavy Symbols and such
  • From: John Griessen
• Re: gEDA-user: uEDA .. was .. Re: Heavy Symbols and such
  • From: John Griessen
• Re: gEDA-user: uEDA .. was .. Re: Heavy Symbols and such
  • From: John Griessen
• Re: gEDA-user: uEDA .. was .. Re: Heavy Symbols and such
  • From: John Griessen
• Re: gEDA-user: Heavy Symbols and such
  • From: John Griessen
• Re: gEDA-user: Heavy Symbols and such
  • From: John Griessen
• Re: gEDA-user: Heavy Symbols and such
  • From: John Griessen
• Re: gEDA-user: Examples for clever use of attributes?
  • From: John Griessen
• Re: gEDA-user: Examples for clever use of attributes?
  • From: John Griessen
• Re: gEDA-user: contest results are out!
  • From: John Griessen
• Re: gEDA-user: Parts DB API, GUI
  • From: John Griessen
• Re: gEDA-user: Parts DB API
  • From: John Griessen
• Re: gEDA-user: Parts DB API
  • From: John Griessen
• Re: gEDA-user: Parts DB API
  • From: John Griessen
• Re: gEDA-user: Parts DB API
  • From: John Griessen
• Re: gEDA-user: Parts DB API
  • From: John Griessen
• Re: gEDA-user: Parts DB API
  • From: John Griessen
• Re: gEDA-user: Parts DB API
  • From: John Griessen
• Re: gEDA-user: youngest user?
  • From: John Griessen
• Re: gEDA-user: Parts DB API
  • From: John Griessen
• Re: gEDA-user: Finally building the board I started using geda/pcb for!
  • From: John Griessen
• Re: gEDA-user: Parts DB API
  • From: John Griessen
• Re: gEDA-user: Fwd: Parts DB API: the story so far
  • From: John Griessen
• Re: gEDA-user: Fwd: Parts DB API: the story so far
  • From: John Griessen
• Re: gEDA-user: youngest user?
  • From: John Griessen
• Re: gEDA-user: Fwd: Parts DB API: the story so far
  • From: John Griessen
• Re: gEDA-user: youngest user?
  • From: John Griessen
• Re: gEDA-user: Parts Data deffinitions
  • From: John Griessen
• gEDA-user: silkscreen styles (was: TV gurus lurking?)
  • From: John Griessen
• Re: gEDA-user: silkscreen styles
  • From: John Griessen
• Re: gEDA-user: Couple pics from my new PCB
  • From: John Griessen
• Re: gEDA-user: [pcb] "first board" docs
  • From: John Griessen
• Re: gEDA-user: usb jack footprints
  • From: John Luciani
• gEDA-user: Pads do not clear polygons
  • From: John Luciani
• Re: gEDA-user: [pcb] "first board" docs
  • From: John Luciani
• Re: gEDA-user: [pcb] "first board" docs
  • From: John Luciani
• Re: gEDA-user: [pcb] "first board" docs
  • From: John Luciani
• Re: gEDA-user: [pcb] "first board" docs
  • From: John Luciani
• Re: gEDA-user: Examples for clever use of attributes?
  • From: John Luciani
• Re: gEDA-user: Examples for clever use of attributes?
  • From: John Luciani
• Re: gEDA-user: Examples for clever use of attributes?
  • From: John Luciani
• Re: gEDA-user: printing out more than one schematic sheet as a ps document
  • From: John Luciani
• Re: gEDA-user: PCB pcblib-newlib and
  • From: John Luciani
• Re: gEDA-user: PCB pcblib-newlib and
  • From: John Luciani
• Re: gEDA-user: PCB pcblib-newlib and
  • From: John Luciani
• Re: gEDA-user: youngest user?
  • From: John Luciani
• Re: gEDA-user: youngest user?
  • From: John Luciani
• Re: gEDA-user: gerbv - not reading format
  • From: Julian
• Re: gEDA-user: Who likes a challenge?
  • From: Julian
• Re: gEDA-user: 2 make errors installing gwave
  • From: Kai-Martin Knaak
• Re: gEDA-user: opinions on move-line-to-layer via removal?
  • From: Kai-Martin Knaak
• Re: gEDA-user: big bug in group move fixed (pcb)
  • From: Kai-Martin Knaak
• Re: gEDA-user: troubles with new snap-to-pad behavior
  • From: Kai-Martin Knaak
• Re: gEDA-user: [ctrl-x] should cut to buffer
  • From: Kai-Martin Knaak
• Re: gEDA-user: Gerbv with OpenGL
  • From: Kai-Martin Knaak
• Re: gEDA-user: Gerbv with OpenGL
  • From: Kai-Martin Knaak
• Re: gEDA-user: Gerbv with OpenGL
  • From: Kai-Martin Knaak
• Re: gEDA-user: Heavy Symbols and such
  • From: Kai-Martin Knaak
• Re: gEDA-user: [pcb] "first board" docs
  • From: Kai-Martin Knaak
• Re: gEDA-user: Added Zoom(Toggle) to lesstif HID
  • From: Kai-Martin Knaak
• Re: gEDA-user: Added Zoom(Toggle) to lesstif HID
  • From: Kai-Martin Knaak
• Re: gEDA-user: Parts DB API
  • From: Kai-Martin Knaak
• gEDA-user: could not connect nets gschem/gsch2pcb/pcb
  • From: Klaus Rudolph
• Re: gEDA-user: Shall we use letters (i.e. E, C, B ) for transsitor pin names?
  • From: Klaus Rudolph
• Re: gEDA-user: could not connect nets gschem/gsch2pcb/pcb
  • From: Klaus Rudolph
• Re: gEDA-user: could not connect nets gschem/gsch2pcb/pcb
  • From: Klaus Rudolph
• Re: gEDA-user: could not connect nets gschem/gsch2pcb/pcb
  • From: Klaus Rudolph
• Re: gEDA-user: 2 make errors installing gwave
  • From: KURT PETERS
• Re: gEDA-user: 2 make errors installing gwave
  • From: KURT PETERS
• gEDA-user: KJWaves - new release
  • From: KURT PETERS
• Re: gEDA-user: gEDA for mass production?
  • From: Larry Doolittle
• Re: gEDA-user: Math functions and PLI
  • From: Larry Doolittle
• Re: gEDA-user: Math functions and PLI
  • From: Larry Doolittle
• Re: gEDA-user: printing out more than one schematic sheet as a ps document
  • From: Larry Doolittle
• Re: gEDA-user: Math functions and PLI
  • From: Larry Doolittle
• Re: gEDA-user: youngest user?
  • From: Larry Doolittle
• Re: gEDA-user: youngest user?
  • From: Larry Doolittle
• Re: gEDA-user: usb jack footprints
  • From: Levente
• Re: gEDA-user: Heavy Symbols and such
  • From: Levente
• Re: gEDA-user: Parts DB
  • From: Levente
• Re: gEDA-user: Parts DB API
  • From: Levente
• Re: gEDA-user: Parts DB API
  • From: Levente
• Re: gEDA-user: Parts DB API
  • From: Levente
• Re: gEDA-user: Parts DB API
  • From: Levente
• Re: gEDA-user: Parts DB API
  • From: Levente
• Re: gEDA-user: Parts DB API
  • From: Levente
• gEDA-user: PCB bug?
  • From: Levente
• Re: gEDA-user: could not connect nets gschem/gsch2pcb/pcb
  • From: Levente
• Re: gEDA-user: PCB bug?
  • From: Levente
• Re: gEDA-user: could not connect nets gschem/gsch2pcb/pcb
  • From: Levente
• Re: gEDA-user: Fwd: Parts DB API: the story so far
  • From: Levente
• Re: gEDA-user: Couple pics from my new PCB
  • From: Levente
• Re: gEDA-user: Couple pics from my new PCB
  • From: Long Li
• Re: gEDA-user: [pcb] "first board" docs
  • From: Long Li
• gEDA-user: anyone has had success with 0.2mm?
  • From: Lope De Vega
• gEDA-user: how to add a rat to a via?
  • From: Lope De Vega
• Re: gEDA-user: how to add a rat to a via?
  • From: Lope De Vega
• Re: gEDA-user: how to add a rat to a via?
  • From: Lope De Vega
• gEDA-user: need a bit of help with a (plated?) drill
  • From: Lope De Vega
• Re: gEDA-user: gEDA for mass production?
  • From: Mark Rages
• Re: gEDA-user: printing out more than one schematic sheet as a ps document
  • From: Marshall Jose
• gEDA-user: Symbols and footprints and stuff, oh my
  • From: Martin Maney
• Re: gEDA-user: Symbols and footprints and stuff, oh my
  • From: Martin Maney
• Re: gEDA-user: Pads do not clear polygons
  • From: Martin Maney
• Re: gEDA-user: Heavy Symbols and such
  • From: Martin Maney
• Re: gEDA-user: Heavy Symbols and such
  • From: Martin Maney
• Re: gEDA-user: [pcb] "first board" docs
  • From: Martin Maney
• Re: gEDA-user: Pads do not clear polygons
  • From: Martin Maney
• Re: gEDA-user: Pads do not clear polygons
  • From: Martin Maney
• Re: gEDA-user: [gattrib] OS X cut/paste
  • From: Martin Maney
• gEDA-user: Math functions and PLI
  • From: Matt Ettus
• gEDA-user: SD or MMC card model?
  • From: Matt Ettus
• gEDA-user: gerbv - not reading format
  • From: Matthew Sager
• Re: gEDA-user: Heavy Symbols and such
  • From: Michael Sokolov
• Re: gEDA-user: uEDA .. was .. Re: Heavy Symbols and such
  • From: Michael Sokolov
• gEDA-user: www.gedasymbols.org unreachable?
  • From: Michael Stovenour
• Re: gEDA-user: www.gedasymbols.org unreachable?
  • From: Michael Stovenour
• Re: gEDA-user: [pcb] Terminology section "done"
  • From: Michael Stovenour
• gEDA-user: gattrib inserting a space before every csv column?
  • From: Michael Stovenour
• Re: gEDA-user: [gattrib] OS X cut/paste
  • From: Michael Stovenour
• gEDA-user: PCB pcblib-newlib and
  • From: Michael Stovenour
• gEDA-user: Finding Polygon Vertices
  • From: Michael Stovenour
• Re: gEDA-user: PCB pcblib-newlib and
  • From: Michael Stovenour
• Re: gEDA-user: Finding Polygon Vertices
  • From: Michael Stovenour
• Re: gEDA-user: PCB pcblib-newlib and
  • From: Michael Stovenour
• Re: gEDA-user: PCB pcblib-newlib and
  • From: Michael Stovenour
• Re: gEDA-user: PCB bug?
  • From: Michael Stovenour
• gEDA-user: cannot find xgsch2pcb
  • From: Nate Lowrie
• gEDA-user: printing out more than one schematic sheet as a ps document
  • From: Nate Lowrie
• Re: gEDA-user: printing out more than one schematic sheet as a ps document
  • From: Nate Lowrie
• Re: gEDA-user: gschem, howto prevent generation of .sch~ backup files?
  • From: Nathan Kohagen
• Re: gEDA-user: Parts DB API
  • From: Paul Tan
• Re: gEDA-user: Parts DB API
  • From: Paul Tan
• gEDA-user: Parts DB API
  • From: peter
• Re: gEDA-user: libgeda build failure
  • From: peter
• Re: gEDA-user: 2 make errors installing gwave
  • From: Peter Clifton
• Re: gEDA-user: 2 make errors installing gwave
  • From: Peter Clifton
• Re: gEDA-user: printing solder layer only, mirrored
  • From: Peter Clifton
• gEDA-user: Gerbv with OpenGL
  • From: Peter Clifton
• Re: gEDA-user: Gerbv with OpenGL
  • From: Peter Clifton
• Re: gEDA-user: Gerbv with OpenGL
  • From: Peter Clifton
• Re: gEDA-user: Gerbv with OpenGL
  • From: Peter Clifton
• Re: gEDA-user: Heavy Symbols and such
  • From: Peter Clifton
• Re: gEDA-user: Heavy Symbols and such
  • From: Peter Clifton
• Re: gEDA-user: updating your OS, was: Re: Export gerber crash
  • From: Peter Clifton
• Re: gEDA-user: Who likes a challenge?
  • From: Peter Clifton
• Re: gEDA-user: uEDA .. was .. Re: Heavy Symbols and such
  • From: Peter Clifton
• Re: gEDA-user: updating your OS, was: Re: Export gerber crash
  • From: Peter Clifton
• Re: gEDA-user: uEDA .. was .. Re: Heavy Symbols and such
  • From: Peter Clifton
• Re: gEDA-user: updating your OS, was: Re: Export gerber crash
  • From: Peter Clifton
• Re: gEDA-user: how to add a rat to a via?
  • From: Peter Clifton
• Re: gEDA-user: ElementArc
  • From: Peter Clifton
• Re: gEDA-user: uEDA .. was .. Re: Heavy Symbols and such
  • From: Peter Clifton
• Re: gEDA-user: ElementArc
  • From: Peter Clifton
• Re: gEDA-user: Heavy Symbols and such
  • From: Peter Clifton
• Re: gEDA-user: project-specific symbol libraries (again)
  • From: Peter Clifton
• Re: gEDA-user: pcb 20070912 and GTK trouble
  • From: Peter Clifton
• Re: gEDA-user: uEDA .. was .. Re: Heavy Symbols and such
  • From: Peter Clifton
• Re: gEDA-user: gschem background image
  • From: Peter Clifton
• Re: gEDA-user: Pads do not clear polygons
  • From: Peter Clifton
• Re: gEDA-user: pcb 20070912 and GTK trouble + another bug?
  • From: Peter Clifton
• Re: gEDA-user: gsch2pcb update
  • From: Peter Clifton
• Re: gEDA-user: gsch2pcb update
  • From: Peter Clifton
• Re: gEDA-user: cannot find xgsch2pcb
  • From: Peter Clifton
• Re: gEDA-user: gerbv
  • From: Peter Clifton
• Re: gEDA-user: Heavy Symbols and such
  • From: Peter Clifton
• Re: gEDA-user: Parts DB (was: Re: Heavy Symbols and such)
  • From: Peter Clifton
• Re: gEDA-user: Schematics and layouts' nets thoughts
  • From: Peter Clifton
• Re: gEDA-user: gsch2pcb update
  • From: Peter Clifton
• Re: gEDA-user: Parts DB API
  • From: Peter Clifton
• Re: gEDA-user: Parts DB API
  • From: Peter Clifton
• Re: gEDA-user: Parts DB API
  • From: Peter Clifton
• Re: gEDA-user: Parts DB API
  • From: Peter Clifton
• Re: gEDA-user: Parts DB API
  • From: Peter Clifton
• Re: gEDA-user: Parts DB API
  • From: Peter Clifton
• Re: gEDA-user: Fwd: Parts DB API: the story so far
  • From: Peter Clifton
• gEDA-user: Any TV repair gurus lurking?
  • From: Peter Clifton
• Re: gEDA-user: Any TV repair gurus lurking?
  • From: Peter Clifton
• Re: gEDA-user: Any TV repair gurus lurking?
  • From: Peter Clifton
• Re: gEDA-user: Any TV repair gurus lurking?
  • From: Peter Clifton
• Re: gEDA-user: Any TV repair gurus lurking?
  • From: Peter Clifton
• Re: gEDA-user: Any TV repair gurus lurking?
  • From: Peter Clifton
• Re: gEDA-user: Any TV repair gurus lurking?
  • From: Peter Clifton
• gEDA-user: Testing of GIT HEAD, new MIME icons etc...
  • From: Peter Clifton
• Re: gEDA-user: libgeda build failure
  • From: Peter Clifton
• Re: gEDA-user: libgeda build failure
  • From: Peter Clifton
• Re: gEDA-user: libgeda build failure
  • From: Peter Clifton
• gEDA-user: Teaser screenshots
  • From: Peter Clifton
• Re: gEDA-user: Testing of GIT HEAD, new MIME icons etc...
  • From: Peter Ragosch
• Re: gEDA-user: Gerbv with OpenGL
  • From: Peter TB Brett
• Re: gEDA-user: anyone has had success with 0.2mm?
  • From: Peter TB Brett
• Re: gEDA-user: uEDA .. was .. Re: Heavy Symbols and such
  • From: Peter TB Brett
• Re: gEDA-user: Heavy Symbols and such
  • From: Peter TB Brett
• Re: gEDA-user: Heavy Symbols and such
  • From: Peter TB Brett
• gEDA-user: project-specific symbol libraries (again)
  • From: Peter TB Brett
• Re: gEDA-user: gsch2pcb update
  • From: Peter TB Brett
• Re: gEDA-user: Parts DB API
  • From: Peter TB Brett
• Re: gEDA-user: Parts DB API
  • From: Peter TB Brett
• Re: gEDA-user: Parts DB API
  • From: Peter TB Brett
• Re: gEDA-user: Parts DB API
  • From: Peter TB Brett
• Re: gEDA-user: Parts DB API
  • From: Peter TB Brett
• Re: gEDA-user: Parts DB API
  • From: Peter TB Brett
• Re: gEDA-user: Parts DB API
  • From: Peter TB Brett
• Re: gEDA-user: Parts DB API
  • From: Peter TB Brett
• Re: gEDA-user: Parts DB API
  • From: Peter TB Brett
• Re: gEDA-user: Finding Polygon Vertices
  • From: Peter TB Brett
• Re: gEDA-user: Parts DB API
  • From: Peter TB Brett
• Re: gEDA-user: Parts DB API
  • From: Peter TB Brett
• Re: gEDA-user: Parts DB API, GUI
  • From: Peter TB Brett
• Re: gEDA-user: Parts DB API
  • From: Peter TB Brett
• gEDA-user: Fwd: Parts DB API: the story so far
  • From: Peter TB Brett
• Re: gEDA-user: could not connect nets gschem/gsch2pcb/pcb
  • From: Peter TB Brett
• Re: gEDA-user: is tragesym still the one to use? and a script for hierarchical symbol making
  • From: Peter TB Brett
• Re: gEDA-user: anyone has had success with 0.2mm?
  • From: Randall Nortman
• Re: gEDA-user: four-layer builds (was: anyone has had success with 0.2mm?)
  • From: Randall Nortman
• Re: gEDA-user: gEDA for mass production?
  • From: Randall Nortman
• Re: gEDA-user: Heavy Symbols and such
  • From: Randall Nortman
• Re: gEDA-user: Any TV repair gurus lurking?
  • From: Richard Rasker
• Re: gEDA-user: 2 make errors installing gwave
  • From: Robert Butts
• gEDA-user: Who likes a challenge?
  • From: Robert Butts
• Re: gEDA-user: Who likes a challenge?
  • From: Robert Butts
• gEDA-user: New system log from my crashed fedora
  • From: Robert Butts
• Re: gEDA-user: youngest user?
  • From: Samuel A. Falvo II
• Re: gEDA-user: youngest user?
  • From: Samuel A. Falvo II
• Re: gEDA-user: youngest user?
  • From: Samuel A. Falvo II
• gEDA-user: problem with gsch2pcb generated pcb file
  • From: Sean D'Epagnier
• Re: gEDA-user: gerbv - abnormal exit (2nd attempt)
  • From: Stefan Petersen
• Re: gEDA-user: gerbv - abnormal exit (2nd attempt)
  • From: Stefan Petersen
• Re: gEDA-user: gerbv - abnormal exit (2nd attempt)
  • From: Stefan Petersen
• Re: gEDA-user: Enlarged footprints for hand soldering -- name conventions
  • From: Stefan Salewski
• gEDA-user: gEDA for mass production?
  • From: Stefan Salewski
• Re: gEDA-user: [pcb] "first board" docs
  • From: Stefan Salewski
• Re: gEDA-user: ElementArc
  • From: Stefan Salewski
• gEDA-user: pcb 20070912 and GTK trouble
  • From: Stefan Salewski
• Re: gEDA-user: pcb 20070912 and GTK trouble
  • From: Stefan Salewski
• Re: gEDA-user: pcb 20070912 and GTK trouble
  • From: Stefan Salewski
• gEDA-user: Shall we use letters (i.e. E, C, B ) for transsitor pin names?
  • From: Stefan Salewski
• Re: gEDA-user: Shall we use letters (i.e. E, C, B ) for transsitor pin names?
  • From: Stefan Salewski
• gEDA-user: Shall we use letters (i.e. E, C, B ) for transsitor pin names?
  • From: Stefan Salewski
• Re: gEDA-user: problem with gsch2pcb generated pcb file
  • From: Stefan Salewski
• gEDA-user: Examples for clever use of attributes?
  • From: Stefan Salewski
• gEDA-user: Building pcb shipped with Gentoo-Linux with lesstif GUI
  • From: Stefan Salewski
• gEDA-user: PhD-Thesis about topological routers of 1997
  • From: Stefan Salewski
• Re: gEDA-user: gEDA-dev: iverilog and Xilinx 8.2
  • From: Stephen Williams
• Re: gEDA-user: Icarus Verilog Release 0.8.6
  • From: Stephen Williams
• Re: gEDA-user: gEDA-dev: iverilog and Xilinx 8.2
  • From: Stephen Williams
• Re: gEDA-user: Icarus Verilog Release 0.8.6
  • From: Stephen Williams
• gEDA-user: Run a Verilog test for me
  • From: Stephen Williams
• Re: gEDA-user: Run a Verilog test for me
  • From: Stephen Williams
• Re: gEDA-user: Math functions and PLI
  • From: Stephen Williams
• Re: gEDA-user: gEDA for mass production?
  • From: Steve Meier
• Re: gEDA-user: gEDA for mass production?
  • From: Steve Meier
• gEDA-user: Heavy Symbols and such
  • From: Steve Meier
• Re: gEDA-user: Heavy Symbols and such
  • From: Steve Meier
• Re: gEDA-user: Heavy Symbols and such
  • From: Steve Meier
• Re: gEDA-user: Heavy Symbols and such
  • From: Steve Meier
• Re: gEDA-user: Heavy Symbols and such
  • From: Steve Meier
• Re: gEDA-user: Heavy Symbols and such
  • From: Steve Meier
• Re: gEDA-user: [gschem] Bus off-page connector?
  • From: Steve Meier
• Re: gEDA-user: Heavy Symbols and such
  • From: Steve Meier
• Re: gEDA-user: Heavy Symbols and such
  • From: Steve Meier
• Re: gEDA-user: Heavy Symbols and such
  • From: Steve Meier
• Re: gEDA-user: Heavy Symbols and such
  • From: Steve Meier
• Re: gEDA-user: uEDA .. was .. Re: Heavy Symbols and such
  • From: Steve Meier
• Re: gEDA-user: uEDA .. was .. Re: Heavy Symbols and such
  • From: Steve Meier
• Re: gEDA-user: uEDA .. was .. Re: Heavy Symbols and such
  • From: Steve Meier
• Re: gEDA-user: uEDA .. was .. Re: Heavy Symbols and such
  • From: Steve Meier
• Re: gEDA-user: uEDA .. was .. Re: Heavy Symbols and such
  • From: Steve Meier
• Re: gEDA-user: uEDA .. was .. Re: Heavy Symbols and such
  • From: Steve Meier
• Re: gEDA-user: uEDA .. was .. Re: Heavy Symbols and such
  • From: Steve Meier
• Re: gEDA-user: uEDA .. was .. Re: Heavy Symbols and such
  • From: Steve Meier
• Re: gEDA-user: uEDA .. was .. Re: Heavy Symbols and such
  • From: Steve Meier
• Re: gEDA-user: uEDA .. was .. Re: Heavy Symbols and such
  • From: Steve Meier
• Re: gEDA-user: uEDA .. was .. Re: Heavy Symbols and such
  • From: Steve Meier
• Re: gEDA-user: how to add a rat to a via?
  • From: Steve Meier
• Re: gEDA-user: how to add a rat to a via?
  • From: Steve Meier
• Re: gEDA-user: how to add a rat to a via?
  • From: Steve Meier
• Re: gEDA-user: PCAD to GEDA (GSCHEM)
  • From: Steve Meier
• Re: gEDA-user: Heavy Symbols and such
  • From: Steve Meier
• Re: gEDA-user: Heavy Symbols and such
  • From: Steve Meier
• Re: gEDA-user: Heavy Symbols and such
  • From: Steve Meier
• Re: gEDA-user: Shall we use letters (i.e. E, C, B ) for transsitor pin names?
  • From: Steve Meier
• Re: gEDA-user: Schematics and layouts' nets thoughts
  • From: Steve Meier
• Re: gEDA-user: Shall we use letters (i.e. E, C, B ) for transsitor pin names?
  • From: Steve Meier
• Re: gEDA-user: Shall we use letters (i.e. E, C, B ) for transsitor pin names?
  • From: Steve Meier
• Re: gEDA-user: Shall we use letters (i.e. E, C, B ) for transsitor pin names?
  • From: Steve Meier
• Re: gEDA-user: Parts DB
  • From: Steve Meier
• Re: gEDA-user: contest results are out!
  • From: Steve Meier
• Re: gEDA-user: Parts DB API
  • From: Steve Meier
• Re: gEDA-user: Parts DB API
  • From: Steve Meier
• Re: gEDA-user: Parts DB API
  • From: Steve Meier
• Re: gEDA-user: Parts DB API
  • From: Steve Meier
• Re: gEDA-user: Parts DB API
  • From: Steve Meier
• Re: gEDA-user: Parts DB API
  • From: Steve Meier
• Re: gEDA-user: Parts DB API
  • From: Steve Meier
• Re: gEDA-user: Parts DB API
  • From: Steve Meier
• Re: gEDA-user: Parts DB API
  • From: Steve Meier
• Re: gEDA-user: youngest user?
  • From: Steve Meier
• Re: gEDA-user: Fwd: Parts DB API: the story so far
  • From: Steve Meier
• Re: gEDA-user: Fwd: Parts DB API: the story so far
  • From: Steve Meier
• Re: gEDA-user: Fwd: Parts DB API: the story so far
  • From: Steve Meier
• Re: gEDA-user: Fwd: Parts DB API: the story so far
  • From: Steve Meier
• Re: gEDA-user: youngest user?
  • From: Steve Meier
• Re: gEDA-user: youngest user?
  • From: Steve Meier
• Re: gEDA-user: youngest user?
  • From: Steve Meier
• Re: gEDA-user: youngest user?
  • From: Steve Meier
• Re: gEDA-user: could not connect nets gschem/gsch2pcb/pcb
  • From: Steve Meier
• Re: gEDA-user: youngest user?
  • From: Steve Meier
• Re: gEDA-user: youngest user?
  • From: Steve Meier
• gEDA-user: Parts Data deffinitions
  • From: Steve Meier
• Re: gEDA-user: youngest user?
  • From: Steve Meier
• Re: gEDA-user: [OT] Beer and bicycles
  • From: Steve Meier
• Re: gEDA-user: Parts Data deffinitions
  • From: Steve Meier
• Re: gEDA-user: Couple pics from my new PCB
  • From: Steve Meier
• Re: gEDA-user: Fwd: Parts DB API: the story so far
  • From: Steve Meier
• Re: gEDA-user: Fwd: Parts DB API: the story so far
  • From: Steve Meier
• Re: gEDA-user: Fwd: Parts DB API: the story so far
  • From: Steve Meier
• Re: gEDA-user: Heavy Symbols and such
  • From: Steven Ball
• Re: gEDA-user: PCAD to GEDA (GSCHEM)
  • From: Steven Ball
• Re: gEDA-user: Heavy Symbols and such
  • From: Steven Ball
• Re: gEDA-user: gEDA for mass production?
  • From: Steven Michalske
• Re: gEDA-user: gschem, howto prevent generation of .sch~ backup files?
  • From: Steven Michalske
• Re: gEDA-user: "min annular ring" vs "drill to copper distance"
  • From: Steven Michalske
• Re: gEDA-user: Heavy Symbols and such
  • From: Steven Michalske
• Re: gEDA-user: uEDA .. was .. Re: Heavy Symbols and such
  • From: Steven Michalske
• Re: gEDA-user: PCB Thermal finger width
  • From: Steven Michalske
• Re: gEDA-user: gattrib inserting a space before every csv column?
  • From: Steven Michalske
• Re: gEDA-user: Heavy Symbols and such
  • From: Steven Michalske
• Re: gEDA-user: Heavy Symbols and such
  • From: Steven Michalske
• Re: gEDA-user: Fwd: Parts DB API: the story so far
  • From: Steven Michalske
• Re: gEDA-user: Fwd: Parts DB API: the story so far
  • From: Steven Michalske
• Re: gEDA-user: is tragesym still the one to use? and a script for hierarchical symbol making
  • From: Steven Michalske
• Re: gEDA-user: is tragesym still the one to use? and a script for hierarchical symbol making
  • From: Steven Michalske
• Re: gEDA-user: 2 make errors installing gwave
  • From: Stuart Brorson
• Re: gEDA-user: gerbv - not reading format
  • From: Stuart Brorson
• Re: gEDA-user: Heavy Symbols and such
  • From: Stuart Brorson
• Re: gEDA-user: Examples for clever use of attributes?
  • From: Stuart Brorson
• Re: gEDA-user: contest results are out!
  • From: Stuart Brorson
• Re: gEDA-user: Fwd: Parts DB API: the story so far
  • From: Stuart Brorson
• Re: gEDA-user: Fwd: Parts DB API: the story so far
  • From: Stuart Brorson
• Re: gEDA-user: Fwd: Parts DB API: the story so far
  • From: Stuart Brorson
• Re: gEDA-user: Any TV repair gurus lurking?
  • From: Stuart Brorson
• Re: gEDA-user: Fwd: Parts DB API: the story so far
  • From: Stuart Brorson
• Re: gEDA-user: Fwd: Parts DB API: the story so far
  • From: Stuart Brorson
• Re: gEDA-user: libgeda build failure
  • From: Stuart Brorson
• Re: gEDA-user: printing out more than one schematic sheet as a ps document
  • From: Tamas Szabo
• Re: gEDA-user: is tragesym still the one to use? and a script for hierarchical symbol making
  • From: Tamas Szabo
• Re: gEDA-user: is tragesym still the one to use? and a script for hierarchical symbol making
  • From: Tamas Szabo
• gEDA-user: gschem: customizing keymaps
  • From: Thomas Franke
• Re: gEDA-user: gschem: customizing keymaps
  • From: Thomas Franke
• Re: gEDA-user: Problem with OGD1: Can anyone advise on good low-jitter
  • From: Timothy Normand Miller
• Re: gEDA-user: [gattrib] OS X cut/paste
  • From: Timothy Normand Miller
• gEDA-user: printing solder layer only, mirrored
  • From: tj
• Re: gEDA-user: printing solder layer only, mirrored
  • From: tj
• Re: gEDA-user: silkscreen styles
  • From: Tomaz Solc
• gEDA-user: HOW TO COUNT QTY OF UNROUTED TRACKS (LIKE A DRC) IN PCB
  • From: Transistor Toaster
• Re: gEDA-user: First install and a tragesym problem
  • From: vidtech
• Re: gEDA-user: First install and a tragesym problem
  • From: vidtech
• Re: gEDA-user: First install and a tragesym problem
  • From: vidtech
• Re: gEDA-user: 2 make errors installing gwave
  • From: Werner Hoch
• Re: gEDA-user: gEDA-announce: gerbv-1.0.3 released!
  • From: Werner Hoch
• Re: gEDA-user: Icarus Verilog Release 0.8.6
  • From: Werner Hoch
• Re: gEDA-user: 2 make errors installing gwave
  • From: Werner Hoch
• Re: gEDA-user: Icarus Verilog Release 0.8.6
  • From: Werner Hoch
• Re: gEDA-user: 2 make errors installing gwave
  • From: Werner Hoch
• Re: gEDA-user: Icarus Verilog Release 0.8.6
  • From: Werner Hoch
• Re: gEDA-user: Icarus Verilog Release 0.8.6
  • From: Werner Hoch
• Re: gEDA-user: Shall we use letters (i.e. E, C, B ) for transsitor pin names?
  • From: Werner Hoch
• Re: gEDA-user: Shall we use letters (i.e. E, C, B ) for transsitor pin names?
  • From: Werner Hoch
• Re: gEDA-user: Parts DB API
  • From: Werner Hoch
• Re: gEDA-user: is tragesym still the one to use? and a script for hierarchical symbol making
  • From: Werner Hoch
• Re: gEDA-user: is tragesym still the one to use? and a script for hierarchical symbol making
  • From: Werner Hoch
• Re: gEDA-user: is tragesym still the one to use? and a script for hierarchical symbol making
  • From: Werner Hoch
• gEDA-user: gerbv - abnormal exit (2nd attempt)
  • From: wilson1442
• Re: gEDA-user: gerbv - abnormal exit (2nd attempt)
  • From: wilson1442